| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023. |
| The SCP server in Cisco IOS 12.2 through 12.4, when Role-Based CLI Access is enabled, does not enforce the CLI view configuration for file transfers, which allows remote authenticated users with an attached CLI view to (1) read or (2) overwrite arbitrary files via an SCP command. |
| Multiple unspecified vulnerabilities in the SSH server in Cisco IOS 12.4 allow remote attackers to cause a denial of service (device restart) via unknown vectors, aka Bug ID (1) CSCsk42419, (2) CSCsk60020, and (3) CSCsh51293. |
| Unspecified vulnerability in Cisco IOS 12.0 through 12.4 allows context-dependent attackers to cause a denial of service (device restart and BGP routing table rebuild) via certain regular expressions in a "show ip bgp regexp" command. NOTE: unauthenticated remote attacks are possible in environments with anonymous telnet and Looking Glass access. |
| Cisco IOS XR 3.8.1 and earlier allows remote attackers to cause a denial of service (process crash) via a long BGP UPDATE message, as demonstrated by a message with many AS numbers in the AS Path Attribute. |
| Cisco IOS XR 3.8.1 and earlier allows remote authenticated users to cause a denial of service (process crash) via vectors involving a BGP UPDATE message with many AS numbers prepended to the AS path. |
| The (1) Airline Product Set (aka ALPS), (2) Serial Tunnel Code (aka STUN), (3) Block Serial Tunnel Code (aka BSTUN), (4) Native Client Interface Architecture (NCIA) support, (5) Data-link switching (aka DLSw), (6) Remote Source-Route Bridging (RSRB), (7) Point to Point Tunneling Protocol (PPTP), (8) X.25 for Record Boundary Preservation (RBP), (9) X.25 over TCP (XOT), and (10) X.25 Routing features in Cisco IOS 12.2 and 12.4 allows remote attackers to cause a denial of service (device reload) via a series of crafted TCP packets. |
| SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte. |
| The server IKEv1 implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.6, IOS XE through 3.18S, IOS XR 4.3.x and 5.0.x through 5.2.x, and PIX before 7.0 allows remote attackers to obtain sensitive information from device memory via a Security Association (SA) negotiation request, aka Bug IDs CSCvb29204 and CSCvb36055 or BENIGNCERTAIN. |
| Cisco IOS XR 3.4.0 through 3.9.1, when BGP is enabled, does not properly handle unrecognized transitive attributes, which allows remote attackers to cause a denial of service (peering reset) via a crafted prefix announcement, as demonstrated in the wild in August 2010 with attribute type code 99, aka Bug ID CSCti62211. |
| Cisco IOS XR 3.4.0 through 3.8.1 allows remote attackers to cause a denial of service (session reset) via a BGP UPDATE message with an invalid attribute, as demonstrated in the wild on 17 August 2009. |
| A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to execute arbitrary commands as root on the underlying operating system of an affected device.
This vulnerability is due to insufficient validation of user arguments that are passed to specific CLI commands. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the prompt. A successful exploit could allow the attacker to elevate privileges to root and execute arbitrary commands on the underlying operating system. |
| A vulnerability in the Intermediate System-to-Intermediate System (IS-IS) multi-instance routing feature of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the IS-IS process to restart unexpectedly.
This vulnerability is due to insufficient input validation of ingress IS-IS packets. An attacker could exploit this vulnerability by sending crafted IS-IS packets to an affected device after forming an adjacency. A successful exploit could allow the attacker to cause the IS-IS process to restart unexpectedly, resulting in a temporary loss of connectivity to advertised networks and a denial of service (DoS) condition.
Note: The IS-IS protocol is a routing protocol. To exploit this vulnerability, an attacker must be Layer 2-adjacent to the affected device and must have formed an adjacency. |
| A vulnerability in task group assignment for a specific CLI command in Cisco IOS XR Software could allow an authenticated, local attacker to elevate privileges and gain full administrative control of an affected device.
This vulnerability is due to incorrect mapping of a command to task groups within the source code. An attacker with a low-privileged account could exploit this vulnerability by using the CLI command to bypass the task group–based checks. A successful exploit could allow the attacker to elevate privileges and perform actions on an affected device without authorization checks. |
| A vulnerability in the handling of an Egress Packet Network Interface (EPNI) Aligner interrupt in Cisco IOS XR Software for Cisco Network Convergence System (NCS) 5500 Series with NC57 line cards and Cisco NCS 5700 Routers and Cisco IOS XR Software for Third Party Software could allow an unauthenticated, remote attacker to cause the network processing unit (NPU) and ASIC to stop processing, preventing traffic from traversing the interface.
This vulnerability is due to the corruption of packets in specific cases when an EPNI Aligner interrupt is triggered while an affected device is experiencing heavy transit traffic. An attacker could exploit this vulnerability by sending a continuous flow of crafted packets to an interface of the affected device. A successful exploit could allow the attacker to cause persistent, heavy packet loss, resulting in a denial of service (DoS) condition.
Note: If active exploitation of this vulnerability is suspected, contact the Cisco Technical Assistance Center (TAC) or your contracted maintenance provider.
Cisco has assigned this security advisory a Security Impact Rating (SIR) of High rather than Medium as the score indicates. This change was made because the affected device operates within a critical network segment where compromise could lead to significant disruption or exposure, thereby elevating the overall risk beyond the base technical severity. |
| A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to execute arbitrary commands as root on the underlying operating system of an affected device.
This vulnerability is due to insufficient validation of user arguments that are passed to specific CLI commands. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the prompt. A successful exploit could allow the attacker to elevate privileges to root and execute arbitrary commands. |
| A vulnerability in the boot process of Cisco IOS XR Software could allow an authenticated, local attacker with high privileges to bypass the Secure Boot functionality and load unverified software on an affected device. To exploit this vulnerability, the attacker must have root-system privileges on the affected device.
This vulnerability is due to insufficient verification of modules in the software load process. An attacker could exploit this vulnerability by manipulating the loaded binaries to bypass some of the integrity checks that are performed during the booting process. A successful exploit could allow the attacker to control the boot configuration, which could enable them to bypass the requirement to run Cisco-signed images or alter the security properties of the running system.
Note: This vulnerability affects Cisco IOS XR Software, not the Secure Boot feature.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the boot process of Cisco IOS XR Software could allow an authenticated, local attacker to bypass Cisco IOS XR image signature verification and load unverified software on an affected device. To exploit this vulnerability, the attacker must have root-system privileges on the affected device.
This vulnerability is due to incomplete validation of files in the boot verification process. An attacker could exploit this vulnerability by manipulating the system configuration options to bypass some of the integrity checks that are performed during the boot process. A successful exploit could allow the attacker to control the boot configuration, which could enable them to bypass the requirement to run Cisco-signed images or alter the security properties of the running system.
Note: Because exploitation of this vulnerability could result in the attacker bypassing Cisco image verification, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High. |
| A vulnerability in the installation process of Cisco IOS XR Software could allow an authenticated, local attacker to bypass Cisco IOS XR Software image signature verification and load unsigned software on an affected device. To exploit this vulnerability, the attacker must have root-system privileges on the affected device.
This vulnerability is due to incomplete validation of files during the installation of an .iso file. An attacker could exploit this vulnerability by modifying contents of the .iso image and then installing and activating it on the device. A successful exploit could allow the attacker to load an unsigned file as part of the image activation process. |
| A vulnerability in the web services of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software, Cisco Secure Firewall Threat Defense (FTD) Software, Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, remote attacker (Cisco ASA and FTD Software) or authenticated, remote attacker (Cisco IOS, IOS XE, and IOS XR Software) with low user privileges to execute arbitrary code on an affected device.
This vulnerability is due to improper validation of user-supplied input in HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted web service on an affected device after obtaining additional information about the system, overcoming exploit mitigations, or both. A successful exploit could allow the attacker to execute arbitrary code as root, which may lead to the complete compromise of the affected device.
For more information about this vulnerability, see the Details ["#details"] section of this advisory. |
