| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: Prevent NULL deref when RX memory exhausted
The CPU receives frames from the MAC through conventional DMA: the CPU
allocates buffers for the MAC, then the MAC fills them and returns
ownership to the CPU. For each hardware RX queue, the CPU and MAC
coordinate through a shared ring array of DMA descriptors: one
descriptor per DMA buffer. Each descriptor includes the buffer's
physical address and a status flag ("OWN") indicating which side owns
the buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set
the flag and the MAC is only allowed to clear it, and both must move
through the ring in sequence: thus the ring is used for both
"submissions" and "completions."
In the stmmac driver, stmmac_rx() bookmarks its position in the ring
with the `cur_rx` index. The main receive loop in that function checks
for rx_descs[cur_rx].own=0, gives the corresponding buffer to the
network stack (NULLing the pointer), and increments `cur_rx` modulo the
ring size. After the loop exits, stmmac_rx_refill(), which bookmarks its
position with `dirty_rx`, allocates fresh buffers and rearms the
descriptors (setting OWN=1). If it fails any allocation, it simply stops
early (leaving OWN=0) and will retry where it left off when next called.
This means descriptors have a three-stage lifecycle (terms my own):
- `empty` (OWN=1, buffer valid)
- `full` (OWN=0, buffer valid and populated)
- `dirty` (OWN=0, buffer NULL)
But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In
the past (see 'Fixes:'), there was a bug where the loop could cycle
`cur_rx` all the way back to the first descriptor it dirtied, resulting
in a NULL dereference when mistaken for `full`. The aforementioned
commit resolved that *specific* failure by capping the loop's iteration
limit at `dma_rx_size - 1`, but this is only a partial fix: if the
previous stmmac_rx_refill() didn't complete, then there are leftover
`dirty` descriptors that the loop might encounter without needing to
cycle fully around. The current code therefore panics (see 'Closes:')
when stmmac_rx_refill() is memory-starved long enough for `cur_rx` to
catch up to `dirty_rx`.
Fix this by explicitly checking, before advancing `cur_rx`, if the next
entry is dirty; exit the loop if so. This prevents processing of the
final, used descriptor until stmmac_rx_refill() succeeds, but
fully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix
intended: so remove the clamp as well. Since stmmac_rx_zc() is a
copy-paste-and-tweak of stmmac_rx() and the code structure is identical,
any fix to stmmac_rx() will also need a corresponding fix for
stmmac_rx_zc(). Therefore, apply the same check there.
In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the
MAC sets OWN=0 on the final descriptor, it will be unable to send any
further DMA-complete IRQs until it's given more `empty` descriptors.
Currently, the driver simply *hopes* that the next stmmac_rx_refill()
succeeds, risking an indefinite stall of the receive process if not. But
this is not a regression, so it can be addressed in a future change. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads
atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c
unconditionally dereferences 8 bytes at payload_addr(pkt):
value = *(u64 *)payload_addr(pkt);
check_rkey() previously accepted an ATOMIC_WRITE request with pktlen ==
resid == 0 because the length validation only compared pktlen against
resid. A remote initiator that sets the RETH length to 0 therefore reaches
atomic_write_reply() with a zero-byte logical payload, and the responder
reads sizeof(u64) bytes from past the logical end of the packet into
skb->head tailroom, then writes those 8 bytes into the attacker's MR via
rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel
tailroom per probe (the other 4 bytes are the packet's own trailing ICRC).
IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is
protocol-invalid. Hoist a strict length check into check_rkey() so the
responder never reaches the unchecked dereference, and keep the existing
WRITE-family length logic for the normal RDMA WRITE path.
Reproduced on mainline with an unmodified rxe driver: a sustained
zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer
bytes into the attacker's MR, including recognisable kernel strings and
partial kernel-direct-map pointer words. With this patch applied the
responder rejects the PDU and the MR stays all-zero. |
| In the Linux kernel, the following vulnerability has been resolved:
block: add pgmap check to biovec_phys_mergeable
biovec_phys_mergeable() is used by the request merge, DMA mapping,
and integrity merge paths to decide if two physically contiguous
bvec segments can be coalesced into one. It currently has no check
for whether the segments belong to different dev_pagemaps.
When zone device memory is registered in multiple chunks, each chunk
gets its own dev_pagemap. A single bio can legitimately contain
bvecs from different pgmaps -- iov_iter_extract_bvecs() breaks at
pgmap boundaries but the outer loop in bio_iov_iter_get_pages()
continues filling the same bio. If such bvecs are physically
contiguous, biovec_phys_mergeable() will coalesce them, making it
impossible to recover the correct pgmap for the merged segment
via page_pgmap().
Add a zone_device_pages_have_same_pgmap() check to prevent merging
bvec segments that span different pgmaps. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete
KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s
hlist_del_rcu calls under syzkaller load on linux-6.12.y stable
(reproduced on 6.12.47, also reachable via the same code path on
torvalds/master and on the ipsec tree). Nine unique signatures cluster
in the xfrm_state lifecycle, the load-bearing one being:
BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline]
BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline]
BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c
Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435
Workqueue: netns cleanup_net
Call Trace:
__hlist_del / hlist_del_rcu
__xfrm_state_delete
xfrm_state_delete
xfrm_state_flush
xfrm_state_fini
ops_exit_list
cleanup_net
The other observed signatures hit the same slab object from
__xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB
write variant of __xfrm_state_delete, all on the byseq/byspi
hash chains.
__xfrm_state_delete() guards its byseq and byspi unhashes with
value-based predicates:
if (x->km.seq)
hlist_del_rcu(&x->byseq);
if (x->id.spi)
hlist_del_rcu(&x->byspi);
while everywhere else in the file (e.g. state_cache, state_cache_input)
the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets
x->id.spi = newspi inside xfrm_state_lock and then immediately inserts
into byspi, but a path that observes x->id.spi != 0 outside of
xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently
with whether x is actually on the list. The same holds for x->km.seq
versus byseq, and the bydst/bysrc unhashes have no predicate at all,
so a second __xfrm_state_delete() on the same object writes through
LIST_POISON pprev.
The defensive change here:
- Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst,
bysrc, byseq and byspi so a second deletion is a no-op rather
than a write through LIST_POISON pprev. The byseq/byspi nodes
are already initialised in xfrm_state_alloc().
- Test hlist_unhashed() rather than the value predicate for
byseq/byspi, so the unhash decision tracks list state rather than
mutable scalar fields.
Empirical verification: applied this patch on top of v6.12.47, rebuilt,
and re-ran the same syzkaller harness for 1h16m on a previously-crashy
configuration that produced ~100 hits each of slab-use-after-free
Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in
__xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at
~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo
confirms the xfrm_state slab is actively allocated and freed during
the run (~143 KiB resident), so the fuzzer is still exercising those
code paths -- they just no longer crash.
Reproduction:
- Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV
- syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db
- 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal
- 9 unique signatures collected in ~9h, all within xfrm_state
lifecycle |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock
Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path".
Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race
with their writes, results in use-after-free. Fix those.
This patch (of 2):
damon_sysfs_scheme_filter->mmecg_path can be read and written by users,
via DAMON sysfs memcg_path file. It can also be indirectly read, for the
parameters {on,off}line committing to DAMON. The reads for parameters
committing are protected by damon_sysfs_lock to avoid the sysfs files
being destroyed while any of the parameters are being read. But the
user-driven direct reads and writes are not protected by any lock, while
the write is deallocating the memcg_path-pointing buffer. As a result,
the readers could read the already freed buffer (user-after-free). Note
that the user-reads don't race when the same open file is used by the
writer, due to kernfs's open file locking. Nonetheless, doing the reads
and writes with separate open files would be common. Fix it by protecting
both the user-direct reads and writes with damon_sysfs_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: virtio_bt: clamp rx length before skb_put
virtbt_rx_work() calls skb_put(skb, len) where len comes directly
from virtqueue_get_buf() with no validation against the buffer we
posted to the device. The RX skb is allocated in virtbt_add_inbuf()
and exposed to virtio as exactly 1000 bytes via sg_init_one().
Checking len against skb_tailroom(skb) is not sufficient because
alloc_skb() can leave more tailroom than the 1000 bytes actually
handed to the device. A malicious or buggy backend can therefore
report used.len between 1001 and skb_tailroom(skb), causing skb_put()
to include uninitialized kernel heap bytes that were never written by
the device.
The same path also accepts len == 0, in which case skb_put(skb, 0)
leaves the skb empty but virtbt_rx_handle() still reads the pkt_type
byte from skb->data, consuming uninitialized memory.
Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and
sg_init_one(), and gate virtbt_rx_work() on that same constant so
the bound checked matches the buffer actually exposed to the device.
Reject used.len == 0 in the same gate so an empty completion can
no longer reach virtbt_rx_handle().
Use bt_dev_err_ratelimited() because the length value comes from an
untrusted backend that can otherwise flood the kernel log.
Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened the USB 9p
transport against unchecked device-reported length. |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: validate block number from NFS file handle in isofs_export_iget
isofs_fh_to_dentry() and isofs_fh_to_parent() pass an attacker-
controlled block number (ifid->block or ifid->parent_block) from
the NFS file handle to isofs_export_iget(), which only rejects
block == 0 before calling isofs_iget() and ultimately sb_bread().
A crafted file handle with fh_len sufficient to pass the check
added by commit 0405d4b63d08 ("isofs: Prevent the use of too small
fid") can still drive the server to read any in-range block on the
backing device as if it were an iso_directory_record. That earlier
fix was assigned CVE-2025-37780.
sb_bread() on an out-of-range block returns NULL cleanly via the
EIO path, so there is no memory-safety violation. For in-range
reads of adjacent-partition data on the same block device, the
unrelated bytes end up in iso_inode_info fields that reach the NFS
client as dentry metadata. The deployment surface (isofs exported
over NFS from loop-mounted images) is narrow and requires an
authenticated NFS peer, but the malformed-file-handle class is
reportable as hardening next to the existing CVE-2025-37780 fix.
Reject block >= ISOFS_SB(sb)->s_nzones in isofs_export_iget() so
the check covers both isofs_fh_to_dentry() and isofs_fh_to_parent()
call sites with a single line. |
| A flaw was found in the X.Org X server. This vulnerability, an out-of-bounds read, affects the XKB (X Keyboard Extension) modifier map handling. An attacker with access to the X11 server can exploit this by sending a malformed request, which causes the server to read beyond its intended memory boundaries. This can lead to the exposure of sensitive information or cause the server to crash, resulting in a denial of service. |
| A flaw was found in the X.Org X server. This out-of-bounds read vulnerability in the XKB geometry processing, specifically within the `CheckSetGeom()` and `XkbAddGeomKeyAlias` functions, allows an attacker to read uninitialized or out-of-bounds memory. An attacker with a connection to the X11 server, either locally or remotely, can exploit this without user interaction. This could lead to the disclosure of memory contents or cause a denial of service by crashing the server. |
| A flaw was found in libsoup. When establishing HTTPS tunnels through a configured HTTP proxy, sensitive session cookies are transmitted in cleartext within the initial HTTP CONNECT request. A network-positioned attacker or a malicious HTTP proxy can intercept these cookies, leading to potential session hijacking or user impersonation. |
| The Independent Analytics plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 2.14.9. This is due to a public tracking route at /wp-json/iawp/search that accepts attacker-controlled referrer_url values when the signature matches, combined with a scheduled favicon fetcher that performs unrestricted cURL requests to stored domains. The signature validation is insufficient because the signature is embedded in publicly-accessible JavaScript and the salt is static per site, allowing attackers to extract valid signatures. The favicon downloader uses raw cURL functions without any SSRF protection mechanisms (no localhost blocking, no private network filtering, and does not use WordPress's wp_safe_remote_* functions). This makes it possible for unauthenticated attackers to inject malicious referrer domains into the database and trigger server-side requests to arbitrary hosts including internal services. |
| The FOX – Currency Switcher Professional for WooCommerce plugin for WordPress is vulnerable to Authorization Bypass Through User-Controlled Key in all versions up to and including 1.4.6. This is due to the `get_value()` function in `classes/fixed/fixed_user_role.php` trusting the attacker-controlled `$_REQUEST['wooc_order_user_roles']` parameter to determine the user's role context for role-based price resolution without any validation, allowing it to override the legitimate role data derived from the authenticated user's session object via `$user->roles`. This makes it possible for authenticated attackers, with Subscriber-level access and above, to impersonate higher-privileged roles — such as wholesale customer or administrator — and obtain discounted or otherwise restricted pricing that should not be available to their actual role. This vulnerability only has practical impact when the fixed user-role pricing feature is enabled and at least one product has a privileged-role price configured. |
| The Login No Captcha reCAPTCHA plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the `$_SERVER['PHP_SELF']` superglobal in all versions up to, and including, 1.8.0. This is due to the `authenticate()` function storing the unsanitized output of `basename($_SERVER['PHP_SELF'])` in the `login_nocaptcha_error` WordPress option when a login attempt is made from a non-standard login page (e.g., xmlrpc.php). The `admin_notices()` function then echoes this stored value directly into the admin dashboard HTML without escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts that execute when an administrator with a whitelisted IP address visits the WordPress dashboard within 30 seconds of the attack. |
| The Timetable and Event Schedule by MotoPress plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 2.4.16 via the action_get_event_data due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with contributor-level access and above, to enumerate timeslot IDs and read the full WP_Post object — including post_content, post_excerpt, post_status, and post_author — of draft, pending, and private mp-event posts belonging to other users, along with their associated raw timeslot descriptions. |
| The Frontend Admin by DynamiApps plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 3.29.2. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to overwrite an administrator's user_pass, user_email, first_name, last_name, and other profile fields by supplying an arbitrary ?user_id= value, enabling full administrator account takeover via direct password replacement or email-redirect password reset. Exploitation requires the targeted Edit-User form to have its 'Roles' configuration setting left empty; when a non-empty roles list is configured, load_data() sets the user ID to 'none' for users whose roles fall outside the allowed list, preventing administrators from being targeted through that form. |
| The Meta Field Block plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 1.5.1. This is due to the plugin allowing users to specify arbitrary object IDs and object types via block attributes without validating whether the authenticated user has permission to access the requested object's metadata. This makes it possible for authenticated attackers, with Contributor-level access and above, to read arbitrary user meta, post meta, and term meta data from any object in the database. On sites using plugins that store sensitive data in meta fields (e.g., WooCommerce billing/shipping information), this could lead to the exposure of Personally Identifiable Information (PII) including names, email addresses, phone numbers, and physical addresses. |
| The Crawlomatic Multipage Scraper Post Generator plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 2.7.2 via the filter_content function. This is due to passing the attacker-supplied 'callback_raw' shortcode attribute directly into call_user_func() with no sanitization or allowlist validation, relying solely on an is_callable() check that permits dangerous PHP built-ins such as system, shell_exec, exec, passthru, and assert. This makes it possible for authenticated attackers, with author-level access and above, to execute code on the server. An identical sink exists for the 'callback' attribute, providing a second independent vector through the same shortcode. |
| The LiveSmart Video Chat Live Video Chat plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'livesmart_widget' shortcode in all versions up to, and including, 1.2 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Easy Digital Downloads plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 3.6.7. This is due to missing nonce verification in the `handle_oauth_redirect()` function, which is registered on the `admin_init` hook and processes Square OAuth tokens from a user-supplied GET parameter without any CSRF token validation. This makes it possible for unauthenticated attackers to overwrite the store's Square payment gateway credentials by tricking a logged-in administrator into clicking a crafted link, potentially resulting in payment account hijacking. |
| The SlimStat Analytics plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'User-Agent' header in all versions up to, and including, 5.4.11 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The show_complete_user_agent_tooltip setting must be explicitly enabled by an administrator (disabled by default) for the stored payload to be rendered and executed. |
