| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenClaw before 2026.3.31 fails to terminate active WebSocket sessions when rotating device tokens. Attackers with previously compromised credentials can maintain unauthorized access through existing WebSocket connections after token rotation. |
| A vulnerability in the browser-based remote management interface may allow an administrator to access sensitive information on the device via crafted requests, affecting certain production printers and office/small office multifunction printers. |
| A vulnerability exists in SenseLive X3050’s web management interface in which password updates are not reliably applied due to improper handling of credential changes on the backend. After the device undergoes a factory restore using the SenseLive Config 2.0 tool, the interface may indicate that the password update was successful; however, the system may continue to accept the previous or default credentials, demonstrating that the password-change process is not consistently enforced. Even after a factory reset, attempted password changes may fail to propagate correctly. |
| A vulnerability exists in SenseLive X3050’s web management interface due to its reliance on unencrypted HTTP for all administrative communication. Because management traffic, including authentication attempts and configuration data, is transmitted in cleartext, an attacker with access to the same network segment could intercept or observe sensitive operational information. |
| A vulnerability in SenseLive X3050's web management interface allows critical system and network configuration parameters to be modified without sufficient validation and safety controls. Due to inadequate enforcement of constraints on sensitive functions, parameters such as IP addressing, watchdog timers, reconnect intervals, and service ports can be set to unsupported or unsafe values. These configuration changes directly affect core device behaviour and recovery mechanisms. The lack of proper validation and safeguards allows critical system functions to be altered in a manner that can destabilize device operation or render the device persistently unavailable. |
| A vulnerability in SenseLive X3050's web management interface allows state-changing operations to be triggered without proper Cross-Site Request Forgery (CSRF) protections. Because the application does not enforce server-side validation of request origin or implement CSRF tokens, a malicious external webpage could cause a user's browser to submit unauthorized configuration requests to the device. |
| Xibo is an open source digital signage platform with a web content management system and Windows display player software. A stored Cross-Site Scripting (XSS) vulnerability in versions prior to 4.4.1 allows an authenticated user with notification creation permissions to inject arbitrary JavaScript into the notification body. When the notification is set as an "interrupt," the payload executes automatically in the browser of any targeted user upon login, requiring zero user interaction. Exploitation of the vulnerability is possible on behalf of an authorized user who has both of the following privileges, which are not granted to non-admins as standard: Access to the Notification Centre to view past notifications, and include "Add Notification" button to allow for the creation of new notifications. Users should upgrade to version 4.4.1 which fixes this issue. Upgrading to a fixed version is necessary to remediate. Users unable to upgrade should revoke such privileges from users they do not trust. |
| OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. In versions 3.13.0 through 4.10.0, missing checks in `entry_get_attribute_value()` in `ta/pkcs11/src/object.c` can lead to out-of-bounds read from the PKCS#11 TA heap or a crash. When chained with the OOB read, the PKCS#11 TA function `PKCS11_CMD_GET_ATTRIBUTE_VALUE` or `entry_get_attribute_value()` can, with a bad template parameter, be tricked into reading at most 7 bytes beyond the end of the template buffer and writing beyond the end of the template buffer with the content of an attribute value of a PKCS#11 object. Commits e031c4e562023fd9f199e39fd2e85797e4cbdca9, 16926d5a46934c46e6656246b4fc18385a246900, and 149e8d7ecc4ef8bb00ab4a37fd2ccede6d79e1ca contain patches and are anticipated to be part of version 4.11.0. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix use-after-free on error path
In the error path of sev_tsm_init_locked(), the code dereferences 't'
after it has been freed with kfree(). The pr_err() statement attempts
to access t->tio_en and t->tio_init_done after the memory has been
released.
Move the pr_err() call before kfree(t) to access the fields while the
memory is still valid.
This issue reported by Smatch static analyser |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in favethemes Houzez Theme - Functionality houzez-theme-functionality allows Stored XSS.This issue affects Houzez Theme - Functionality: from n/a through <= 4.2.6. |
| Missing Authorization vulnerability in Brecht WP Recipe Maker wp-recipe-maker allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP Recipe Maker: from n/a through <= 10.2.4. |
| Missing Authorization vulnerability in ExpressTech Systems Quiz And Survey Master quiz-master-next allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Quiz And Survey Master: from n/a through <= 10.3.3. |
| The HubSpot All-In-One Marketing - Forms, Popups, Live Chat plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 11.3.32 via the leadin/public/admin/class-adminconstants.php file. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract a list of all installed plugins and their versions which can be leveraged for reconnaissance and further attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: gcs: Do not set PTE_SHARED on GCS mappings if FEAT_LPA2 is enabled
When FEAT_LPA2 is enabled, bits 8-9 of the PTE replace the
shareability attribute with bits 50-51 of the output address. The
_PAGE_GCS{,_RO} definitions include the PTE_SHARED bits as 0b11 (this
matches the other _PAGE_* definitions) but using this macro directly
leads to the following panic when enabling GCS on a system/model with
LPA2:
Unable to handle kernel paging request at virtual address fffff1ffc32d8008
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 52-bit VAs, pgdp=0000000060f4d000
[fffff1ffc32d8008] pgd=100000006184b003, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
CPU: 0 UID: 0 PID: 513 Comm: gcs_write_fault Tainted: G M 7.0.0-rc1 #1 PREEMPT
Tainted: [M]=MACHINE_CHECK
Hardware name: QEMU QEMU Virtual Machine, BIOS 2025.02-8+deb13u1 11/08/2025
pstate: 03402005 (nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : zap_huge_pmd+0x168/0x468
lr : zap_huge_pmd+0x2c/0x468
sp : ffff800080beb660
x29: ffff800080beb660 x28: fff00000c2058180 x27: ffff800080beb898
x26: fff00000c2058180 x25: ffff800080beb820 x24: 00c800010b600f41
x23: ffffc1ffc30af1a8 x22: fff00000c2058180 x21: 0000ffff8dc00000
x20: fff00000c2bc6370 x19: ffff800080beb898 x18: ffff800080bebb60
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000007
x14: 000000000000000a x13: 0000aaaacbbbffff x12: 0000000000000000
x11: 0000ffff8ddfffff x10: 00000000000001fe x9 : 0000ffff8ddfffff
x8 : 0000ffff8de00000 x7 : 0000ffff8da00000 x6 : fff00000c2bc6370
x5 : 0000ffff8da00000 x4 : 000000010b600000 x3 : ffffc1ffc0000000
x2 : fff00000c2058180 x1 : fffff1ffc32d8000 x0 : 000000c00010b600
Call trace:
zap_huge_pmd+0x168/0x468 (P)
unmap_page_range+0xd70/0x1560
unmap_single_vma+0x48/0x80
unmap_vmas+0x90/0x180
unmap_region+0x88/0xe4
vms_complete_munmap_vmas+0xf8/0x1e0
do_vmi_align_munmap+0x158/0x180
do_vmi_munmap+0xac/0x160
__vm_munmap+0xb0/0x138
vm_munmap+0x14/0x20
gcs_free+0x70/0x80
mm_release+0x1c/0xc8
exit_mm_release+0x28/0x38
do_exit+0x190/0x8ec
do_group_exit+0x34/0x90
get_signal+0x794/0x858
arch_do_signal_or_restart+0x11c/0x3e0
exit_to_user_mode_loop+0x10c/0x17c
el0_da+0x8c/0x9c
el0t_64_sync_handler+0xd0/0xf0
el0t_64_sync+0x198/0x19c
Code: aa1603e2 d34cfc00 cb813001 8b011861 (f9400420)
Similarly to how the kernel handles protection_map[], use a
gcs_page_prot variable to store the protection bits and clear PTE_SHARED
if LPA2 is enabled.
Also remove the unused PAGE_GCS{,_RO} macros. |
| A flaw was found in OVN (Open Virtual Network). A remote attacker, by sending crafted DHCPv6 (Dynamic Host Configuration Protocol for IPv6) SOLICIT packets with an inflated Client ID length, could cause the ovn-controller to read beyond the bounds of a packet. This out-of-bounds read can lead to the disclosure of sensitive information stored in heap memory, which is then returned to the attacker's virtual machine port. |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.9.24 to before 0.10.78, the FFI trampolines behind SslContextBuilder::set_psk_client_callback, set_psk_server_callback, set_cookie_generate_cb, and set_stateless_cookie_generate_cb forwarded the user closure's returned usize directly to OpenSSL without checking it against the &mut [u8] that was handed to the closure. This can lead to buffer overflows and other unintended consequences. This vulnerability is fixed in 0.10.78. |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.10.39 to before 0.10.78, EVP_DigestFinal() always writes EVP_MD_CTX_size(ctx) to the out buffer. If out is smaller than that, MdCtxRef::digest_final() writes past its end, usually corrupting the stack. This is reachable from safe Rust. This vulnerability is fixed in 0.10.78. |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.9.0 to before 0.10.78, the *_from_pem_callback APIs did not validate the length returned by the user's callback. A password callback that returns a value larger than the buffer it was given can cause some versions of OpenSSL to over-read this buffer. OpenSSL 3.x is not affected by this. This vulnerability is fixed in 0.10.78. |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.9.27 to before 0.10.78, Deriver::derive (and PkeyCtxRef::derive) sets len = buf.len() and passes it as the in/out length to EVP_PKEY_derive, relying on OpenSSL to honor it. On OpenSSL 1.1.x, X25519, X448, DH and HKDF-extract ignore the incoming *keylen, unconditionally writing the full shared secret (32/56/prime-size bytes). A caller passing a short slice gets a heap/stack overflow from safe code. OpenSSL 3.x providers do check, so this only impacts older OpenSSL. This vulnerability is fixed in 0.10.78. |
| Poetry is a dependency manager for Python. Prior to 2.3.4, the extractall() function in src/poetry/utils/helpers.py:410-426 extracts sdist tarballs without path traversal protection on Python versions where tarfile.data_filter is unavailable. Considering only Python versions which are still supported by Poetry, these are 3.10.0 - 3.10.12 and 3.11.0 - 3.11.4. This vulnerability is fixed in 2.3.4. |
