| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: vidtv: fix NULL pointer dereference in vidtv_channel_pmt_match_sections
syzbot reported a general protection fault in vidtv_psi_desc_assign [1].
vidtv_psi_pmt_stream_init() can return NULL on memory allocation
failure, but vidtv_channel_pmt_match_sections() does not check for
this. When tail is NULL, the subsequent call to
vidtv_psi_desc_assign(&tail->descriptor, desc) dereferences a NULL
pointer offset, causing a general protection fault.
Add a NULL check after vidtv_psi_pmt_stream_init(). On failure, clean
up the already-allocated stream chain and return.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:vidtv_psi_desc_assign+0x24/0x90 drivers/media/test-drivers/vidtv/vidtv_psi.c:629
Call Trace:
<TASK>
vidtv_channel_pmt_match_sections drivers/media/test-drivers/vidtv/vidtv_channel.c:349 [inline]
vidtv_channel_si_init+0x1445/0x1a50 drivers/media/test-drivers/vidtv/vidtv_channel.c:479
vidtv_mux_init+0x526/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:519
vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 [inline]
vidtv_start_feed+0x33e/0x4d0 drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: handle invalid dinode in ocfs2_group_extend
[BUG]
kernel BUG at fs/ocfs2/resize.c:308!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ocfs2_group_extend+0x10aa/0x1ae0 fs/ocfs2/resize.c:308
Code: 8b8520ff ffff83f8 860f8580 030000e8 5cc3c1fe
Call Trace:
...
ocfs2_ioctl+0x175/0x6e0 fs/ocfs2/ioctl.c:869
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
[CAUSE]
ocfs2_group_extend() assumes that the global bitmap inode block
returned from ocfs2_inode_lock() has already been validated and
BUG_ONs when the signature is not a dinode. That assumption is too
strong for crafted filesystems because the JBD2-managed buffer path
can bypass structural validation and return an invalid dinode to the
resize ioctl.
[FIX]
Validate the dinode explicitly in ocfs2_group_extend(). If the global
bitmap buffer does not contain a valid dinode, report filesystem
corruption with ocfs2_error() and fail the resize operation instead of
crashing the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-epf-vntb: Stop cmd_handler work in epf_ntb_epc_cleanup
Disable the delayed work before clearing BAR mappings and doorbells to
avoid running the handler after resources have been torn down.
Unable to handle kernel paging request at virtual address ffff800083f46004
[...]
Internal error: Oops: 0000000096000007 [#1] SMP
[...]
Call trace:
epf_ntb_cmd_handler+0x54/0x200 [pci_epf_vntb] (P)
process_one_work+0x154/0x3b0
worker_thread+0x2c8/0x400
kthread+0x148/0x210
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Drop WARN on large size for KVM_MEMORY_ENCRYPT_REG_REGION
Drop the WARN in sev_pin_memory() on npages overflowing an int, as the
WARN is comically trivially to trigger from userspace, e.g. by doing:
struct kvm_enc_region range = {
.addr = 0,
.size = -1ul,
};
__vm_ioctl(vm, KVM_MEMORY_ENCRYPT_REG_REGION, &range);
Note, the checks in sev_mem_enc_register_region() that presumably exist to
verify the incoming address+size are completely worthless, as both "addr"
and "size" are u64s and SEV is 64-bit only, i.e. they _can't_ be greater
than ULONG_MAX. That wart will be cleaned up in the near future.
if (range->addr > ULONG_MAX || range->size > ULONG_MAX)
return -EINVAL;
Opportunistically add a comment to explain why the code calculates the
number of pages the "hard" way, e.g. instead of just shifting @ulen. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vidtv: fix nfeeds state corruption on start_streaming failure
syzbot reported a memory leak in vidtv_psi_service_desc_init [1].
When vidtv_start_streaming() fails inside vidtv_start_feed(), the
nfeeds counter is left incremented even though no feed was actually
started. This corrupts the driver state: subsequent start_feed calls
see nfeeds > 1 and skip starting the mux, while stop_feed calls
eventually try to stop a non-existent stream.
This state corruption can also lead to memory leaks, since the mux
and channel resources may be partially allocated during a failed
start_streaming but never cleaned up, as the stop path finds
dvb->streaming == false and returns early.
Fix by decrementing nfeeds back when start_streaming fails, keeping
the counter in sync with the actual number of active feeds.
[1]
BUG: memory leak
unreferenced object 0xffff888145b50820 (size 32):
comm "syz.0.17", pid 6068, jiffies 4294944486
backtrace (crc 90a0c7d4):
vidtv_psi_service_desc_init+0x74/0x1b0 drivers/media/test-drivers/vidtv/vidtv_psi.c:288
vidtv_channel_s302m_init+0xb1/0x2a0 drivers/media/test-drivers/vidtv/vidtv_channel.c:83
vidtv_channels_init+0x1b/0x40 drivers/media/test-drivers/vidtv/vidtv_channel.c:524
vidtv_mux_init+0x516/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:518
vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 [inline]
vidtv_start_feed+0x33e/0x4d0 drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 |
| In the Linux kernel, the following vulnerability has been resolved:
net: skb: fix cross-cache free of KFENCE-allocated skb head
SKB_SMALL_HEAD_CACHE_SIZE is intentionally set to a non-power-of-2
value (e.g. 704 on x86_64) to avoid collisions with generic kmalloc
bucket sizes. This ensures that skb_kfree_head() can reliably use
skb_end_offset to distinguish skb heads allocated from
skb_small_head_cache vs. generic kmalloc caches.
However, when KFENCE is enabled, kfence_ksize() returns the exact
requested allocation size instead of the slab bucket size. If a caller
(e.g. bpf_test_init) allocates skb head data via kzalloc() and the
requested size happens to equal SKB_SMALL_HEAD_CACHE_SIZE, then
slab_build_skb() -> ksize() returns that exact value. After subtracting
skb_shared_info overhead, skb_end_offset ends up matching
SKB_SMALL_HEAD_HEADROOM, causing skb_kfree_head() to incorrectly free
the object to skb_small_head_cache instead of back to the original
kmalloc cache, resulting in a slab cross-cache free:
kmem_cache_free(skbuff_small_head): Wrong slab cache. Expected
skbuff_small_head but got kmalloc-1k
Fix this by always calling kfree(head) in skb_kfree_head(). This keeps
the free path generic and avoids allocator-specific misclassification
for KFENCE objects. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix memory leak in ice_set_ringparam()
In ice_set_ringparam, tx_rings and xdp_rings are allocated before
rx_rings. If the allocation of rx_rings fails, the code jumps to
the done label leaking both tx_rings and xdp_rings. Furthermore, if
the setup of an individual Rx ring fails during the loop, the code jumps
to the free_tx label which releases tx_rings but leaks xdp_rings.
Fix this by introducing a free_xdp label and updating the error paths to
ensure both xdp_rings and tx_rings are properly freed if rx_rings
allocation or setup fails.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix preempt count leak in napi poll tracepoint
Using get_cpu() in the tracepoint assignment causes an obvious preempt
count leak because nothing invokes put_cpu() to undo it:
softirq: huh, entered softirq 3 NET_RX with preempt_count 00000100, exited with 00000101?
This clearly has seen a lot of testing in the last 3+ years...
Use smp_processor_id() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: annotate data-races around sk->sk_{data_ready,write_space}
skmsg (and probably other layers) are changing these pointers
while other cpus might read them concurrently.
Add corresponding READ_ONCE()/WRITE_ONCE() annotations
for UDP, TCP and AF_UNIX. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add proper RCU protection to /proc/net/ptype
Yin Fengwei reported an RCU stall in ptype_seq_show() and provided
a patch.
Real issue is that ptype_seq_next() and ptype_seq_show() violate
RCU rules.
ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev
to get device name without any barrier.
At the same time, concurrent writers can remove a packet_type structure
(which is correctly freed after an RCU grace period) and clear pt->dev
without an RCU grace period.
Define ptype_iter_state to carry a dev pointer along seq_net_private:
struct ptype_iter_state {
struct seq_net_private p;
struct net_device *dev; // added in this patch
};
We need to record the device pointer in ptype_get_idx() and
ptype_seq_next() so that ptype_seq_show() is safe against
concurrent pt->dev changes.
We also need to add full RCU protection in ptype_seq_next().
(Missing READ_ONCE() when reading list.next values)
Many thanks to Dong Chenchen for providing a repro. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: common: st_sensors: Fix use of uninitialize device structs
Throughout the various probe functions &indio_dev->dev is used before it
is initialized. This caused a kernel panic in st_sensors_power_enable()
when the call to devm_regulator_bulk_get_enable() fails and then calls
dev_err_probe() with the uninitialized device.
This seems to only cause a panic with dev_err_probe(), dev_err(),
dev_warn() and dev_info() don't seem to cause a panic, but are fixed
as well.
The issue is reported and traced here: [1] |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: don't ignore IO flags
If blk-wbt is enabled by default, it's found that raid write performance
is quite bad because all IO are throttled by wbt of underlying disks,
due to flag REQ_IDLE is ignored. And turns out this behaviour exist since
blk-wbt is introduced.
Other than REQ_IDLE, other flags should not be ignored as well, for
example REQ_META can be set for filesystems, clearing it can cause priority
reverse problems; And REQ_NOWAIT should not be cleared as well, because
io will wait instead of failing directly in underlying disks.
Fix those problems by keep IO flags from master bio.
Fises: f51d46d0e7cb ("md: add support for REQ_NOWAIT") |
| Deserialization of Untrusted Data vulnerability in Apache DolphinScheduler RPC module.
This issue affects Apache DolphinScheduler:
Version >= 3.2.0 and < 3.3.1.
Attackers who can access the Master or Worker nodes can compromise the system by creating a StandardRpcRequest, injecting a malicious class type into it, and sending RPC requests to the DolphinScheduler Master/Worker nodes.
Users are recommended to upgrade to version [3.3.1], which fixes the issue. |
| python-dotenv reads key-value pairs from a .env file and can set them as environment variables. Prior to version 1.2.2, `set_key()` and `unset_key()` in python-dotenv follow symbolic links when rewriting `.env` files, allowing a local attacker to overwrite arbitrary files via a crafted symlink when a cross-device rename fallback is triggered. Users should upgrade to v.1.2.2 or, as a workaround, apply the patch manually. |
| A vulnerability was detected in JiZhiCMS up to 2.5.6. The impacted element is the function htmlspecialchars_decode of the file /index.php/admins/Sys/addcache.html. The manipulation of the argument sqls results in sql injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in pagekit up to 1.0.18. Affected by this issue is some unknown functionality of the file /index.php/admin/system/update/download. The manipulation of the argument url leads to server-side request forgery. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Incorrect Authorization vulnerability in Apache DolphinScheduler allows authenticated users with system login permissions to use tenants that are not defined on the platform during workflow execution.
This issue affects Apache DolphinScheduler versions prior to 3.4.1.
Users are recommended to upgrade to version 3.4.1, which fixes this issue. |
| Step CA is an online certificate authority for secure, automated certificate management for DevOps. Versions 0.30.0-rc6 and below do not safeguard against unauthenticated certificate issuance through the SCEP UpdateReq. This issue has been fixed in version 0.30.0. |
| OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. Prior to 2.4.17, a network-adjacent attacker can send a crafted SNMP response to the CUPS SNMP backend that causes an out-of-bounds read of up to 176 bytes past a stack buffer. The leaked memory is converted from UTF-16 to UTF-8 and stored as printer supply description strings, which are subsequently visible to authenticated users via IPP Get-Printer-Attributes responses and the CUPS web interface. This vulnerability is fixed in 2.4.17. |
| Step CA is an online certificate authority for secure, automated certificate management for DevOps. From 0.24.0 to before 0.30.0-rc3, an attacker can trigger an index out-of-bounds panic in Step CA by sending a crafted attestation key (AK) certificate with an empty Extended Key Usage (EKU) extension during TPM device attestation. When processing a device-attest-01 ACME challenge using TPM attestation, Step CA validates that the AK certificate contains the tcg-kp-AIKCertificate Extended Key Usage OID. During this validation, the EKU extension value is decoded from its ASN.1 representation and the first element is checked. A crafted certificate could include an EKU extension that decodes to an empty sequence, causing the code to panic when accessing the first element of the empty slice. This vulnerability is only reachable when a device-attest-01 ACME challenge with TPM attestation is configured. Deployments not using TPM device attestation are not affected. This vulnerability is fixed in 0.30.0-rc3. |
