| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc_ncm: add ndpoffset to NDP32 nframes bounds check
The same bounds-check bug fixed for NDP16 in the previous patch also
exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated
against the total skb length without accounting for ndpoffset, allowing
out-of-bounds reads when the NDP32 is placed near the end of the NTB.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly.
Compile-tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: Fix double free of ns_name in aa_replace_profiles()
if ns_name is NULL after
1071 error = aa_unpack(udata, &lh, &ns_name);
and if ent->ns_name contains an ns_name in
1089 } else if (ent->ns_name) {
then ns_name is assigned the ent->ns_name
1095 ns_name = ent->ns_name;
however ent->ns_name is freed at
1262 aa_load_ent_free(ent);
and then again when freeing ns_name at
1270 kfree(ns_name);
Fix this by NULLing out ent->ns_name after it is transferred to ns_name
") |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix missing bounds check on DEFAULT table in verify_dfa()
The verify_dfa() function only checks DEFAULT_TABLE bounds when the state
is not differentially encoded.
When the verification loop traverses the differential encoding chain,
it reads k = DEFAULT_TABLE[j] and uses k as an array index without
validation. A malformed DFA with DEFAULT_TABLE[j] >= state_count,
therefore, causes both out-of-bounds reads and writes.
[ 57.179855] ==================================================================
[ 57.180549] BUG: KASAN: slab-out-of-bounds in verify_dfa+0x59a/0x660
[ 57.180904] Read of size 4 at addr ffff888100eadec4 by task su/993
[ 57.181554] CPU: 1 UID: 0 PID: 993 Comm: su Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy)
[ 57.181558] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 57.181563] Call Trace:
[ 57.181572] <TASK>
[ 57.181577] dump_stack_lvl+0x5e/0x80
[ 57.181596] print_report+0xc8/0x270
[ 57.181605] ? verify_dfa+0x59a/0x660
[ 57.181608] kasan_report+0x118/0x150
[ 57.181620] ? verify_dfa+0x59a/0x660
[ 57.181623] verify_dfa+0x59a/0x660
[ 57.181627] aa_dfa_unpack+0x1610/0x1740
[ 57.181629] ? __kmalloc_cache_noprof+0x1d0/0x470
[ 57.181640] unpack_pdb+0x86d/0x46b0
[ 57.181647] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181653] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181656] ? aa_unpack_nameX+0x1a8/0x300
[ 57.181659] aa_unpack+0x20b0/0x4c30
[ 57.181662] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181664] ? stack_depot_save_flags+0x33/0x700
[ 57.181681] ? kasan_save_track+0x4f/0x80
[ 57.181683] ? kasan_save_track+0x3e/0x80
[ 57.181686] ? __kasan_kmalloc+0x93/0xb0
[ 57.181688] ? __kvmalloc_node_noprof+0x44a/0x780
[ 57.181693] ? aa_simple_write_to_buffer+0x54/0x130
[ 57.181697] ? policy_update+0x154/0x330
[ 57.181704] aa_replace_profiles+0x15a/0x1dd0
[ 57.181707] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181710] ? __kvmalloc_node_noprof+0x44a/0x780
[ 57.181712] ? aa_loaddata_alloc+0x77/0x140
[ 57.181715] ? srso_alias_return_thunk+0x5/0xfbef5
[ 57.181717] ? _copy_from_user+0x2a/0x70
[ 57.181730] policy_update+0x17a/0x330
[ 57.181733] profile_replace+0x153/0x1a0
[ 57.181735] ? rw_verify_area+0x93/0x2d0
[ 57.181740] vfs_write+0x235/0xab0
[ 57.181745] ksys_write+0xb0/0x170
[ 57.181748] do_syscall_64+0x8e/0x660
[ 57.181762] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 57.181765] RIP: 0033:0x7f6192792eb2
Remove the MATCH_FLAG_DIFF_ENCODE condition to validate all DEFAULT_TABLE
entries unconditionally. |
| In the Linux kernel, the following vulnerability has been resolved:
nfnetlink_osf: validate individual option lengths in fingerprints
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ
Currently the code attempts to accept requests regardless of the
command identifier which may cause multiple requests to be marked
as pending (FLAG_DEFER_SETUP) which can cause more than
L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer
causing an overflow.
The spec is quite clear that the same identifier shall not be used on
subsequent requests:
'Within each signaling channel a different Identifier shall be used
for each successive request or indication.'
https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d
So this attempts to check if there are any channels pending with the
same identifier and rejects if any are found. |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check metadata block offset is within range
Syzkaller reports a "general protection fault in squashfs_copy_data"
This is ultimately caused by a corrupted index look-up table, which
produces a negative metadata block offset.
This is subsequently passed to squashfs_copy_data (via
squashfs_read_metadata) where the negative offset causes an out of bounds
access.
The fix is to check that the offset is within range in
squashfs_read_metadata. This will trap this and other cases. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: cirrus: cs42l43: Fix double-put in cs42l43_pin_probe()
devm_add_action_or_reset() already invokes the action on failure,
so the explicit put causes a double-put. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPL
In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA
buffer cleanup path. It iterates num_bufs times and attempts to unmap
entries in the dma array.
This leads to two issues:
1. The dma array shares storage with tx_qpl_buf_ids (union).
Interpreting buffer IDs as DMA addresses results in attempting to
unmap incorrect memory locations.
2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed
the size of the dma array, causing out-of-bounds access warnings
(trace below is how we noticed this issue).
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of
range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]')
Workqueue: gve gve_service_task [gve]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0xa0
__ubsan_handle_out_of_bounds+0xdc/0x110
gve_tx_stop_ring_dqo+0x182/0x200 [gve]
gve_close+0x1be/0x450 [gve]
gve_reset+0x99/0x120 [gve]
gve_service_task+0x61/0x100 [gve]
process_scheduled_works+0x1e9/0x380
Fix this by properly checking for QPL mode and delegating to
gve_free_tx_qpl_bufs() to reclaim the buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: ets: fix divide by zero in the offload path
Offloading ETS requires computing each class' WRR weight: this is done by
averaging over the sums of quanta as 'q_sum' and 'q_psum'. Using unsigned
int, the same integer size as the individual DRR quanta, can overflow and
even cause division by zero, like it happened in the following splat:
Oops: divide error: 0000 [#1] SMP PTI
CPU: 13 UID: 0 PID: 487 Comm: tc Tainted: G E 6.19.0-virtme #45 PREEMPT(full)
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets]
Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44
RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246
RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660
RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe
R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000
FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0
Call Trace:
<TASK>
ets_qdisc_change+0x870/0xf40 [sch_ets]
qdisc_create+0x12b/0x540
tc_modify_qdisc+0x6d7/0xbd0
rtnetlink_rcv_msg+0x168/0x6b0
netlink_rcv_skb+0x5c/0x110
netlink_unicast+0x1d6/0x2b0
netlink_sendmsg+0x22e/0x470
____sys_sendmsg+0x38a/0x3c0
___sys_sendmsg+0x99/0xe0
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x111/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f440b81c77e
Code: 4d 89 d8 e8 d4 bc 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 <c9> c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa
RSP: 002b:00007fff951e4c10 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000481820 RCX: 00007f440b81c77e
RDX: 0000000000000000 RSI: 00007fff951e4cd0 RDI: 0000000000000003
RBP: 00007fff951e4c20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff951f4fa8
R13: 00000000699ddede R14: 00007f440bb01000 R15: 0000000000486980
</TASK>
Modules linked in: sch_ets(E) netdevsim(E)
---[ end trace 0000000000000000 ]---
RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets]
Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44
RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246
RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660
RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe
R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000
FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x30000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]---
Fix this using 64-bit integers for 'q_sum' and 'q_psum'. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ife: Fix metalist update behavior
Whenever an ife action replace changes the metalist, instead of
replacing the old data on the metalist, the current ife code is appending
the new metadata. Aside from being innapropriate behavior, this may lead
to an unbounded addition of metadata to the metalist which might cause an
out of bounds error when running the encode op:
[ 138.423369][ C1] ==================================================================
[ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255
[ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full)
[ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 138.425800][ C1] Call Trace:
[ 138.425804][ C1] <IRQ>
[ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122)
[ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1))
[ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597)
[ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1))
[ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2))
[ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171)
[ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57)
[ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114)
[ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3))
[ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45)
[ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879)
To solve this issue, fix the replace behavior by adding the metalist to
the ife rcu data structure. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead
of DMA write size. Different assumptions in ice driver configuration lead
to negative tailroom.
This allows to trigger kernel panic, when using
XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to
6912 and the requested offset to a huge value, e.g.
XSK_UMEM__MAX_FRAME_SIZE * 100.
Due to other quirks of the ZC configuration in ice, panic is not observed
in ZC mode, but tailroom growing still fails when it should not.
Use fill queue buffer truesize instead of DMA write size in XDP RxQ info.
Fix ZC mode too by using the new helper. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: thp: deny THP for files on anonymous inodes
file_thp_enabled() incorrectly allows THP for files on anonymous inodes
(e.g. guest_memfd and secretmem). These files are created via
alloc_file_pseudo(), which does not call get_write_access() and leaves
inode->i_writecount at 0. Combined with S_ISREG(inode->i_mode) being
true, they appear as read-only regular files when
CONFIG_READ_ONLY_THP_FOR_FS is enabled, making them eligible for THP
collapse.
Anonymous inodes can never pass the inode_is_open_for_write() check
since their i_writecount is never incremented through the normal VFS
open path. The right thing to do is to exclude them from THP eligibility
altogether, since CONFIG_READ_ONLY_THP_FOR_FS was designed for real
filesystem files (e.g. shared libraries), not for pseudo-filesystem
inodes.
For guest_memfd, this allows khugepaged and MADV_COLLAPSE to create
large folios in the page cache via the collapse path, but the
guest_memfd fault handler does not support large folios. This triggers
WARN_ON_ONCE(folio_test_large(folio)) in kvm_gmem_fault_user_mapping().
For secretmem, collapse_file() tries to copy page contents through the
direct map, but secretmem pages are removed from the direct map. This
can result in a kernel crash:
BUG: unable to handle page fault for address: ffff88810284d000
RIP: 0010:memcpy_orig+0x16/0x130
Call Trace:
collapse_file
hpage_collapse_scan_file
madvise_collapse
Secretmem is not affected by the crash on upstream as the memory failure
recovery handles the failed copy gracefully, but it still triggers
confusing false memory failure reports:
Memory failure: 0x106d96f: recovery action for clean unevictable
LRU page: Recovered
Check IS_ANON_FILE(inode) in file_thp_enabled() to deny THP for all
anonymous inode files. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kalmia: validate USB endpoints
The kalmia driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix stack-out-of-bounds write in devmap
get_upper_ifindexes() iterates over all upper devices and writes their
indices into an array without checking bounds.
Also the callers assume that the max number of upper devices is
MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack,
but that assumption is not correct and the number of upper devices could
be larger than MAX_NEST_DEV (e.g., many macvlans), causing a
stack-out-of-bounds write.
Add a max parameter to get_upper_ifindexes() to avoid the issue.
When there are too many upper devices, return -EOVERFLOW and abort the
redirect.
To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with
an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS.
Then send a packet to the device to trigger the XDP redirect path. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fred: Correct speculative safety in fred_extint()
array_index_nospec() is no use if the result gets spilled to the stack, as
it makes the believed safe-under-speculation value subject to memory
predictions.
For all practical purposes, this means array_index_nospec() must be used in
the expression that accesses the array.
As the code currently stands, it's the wrong side of irqentry_enter(), and
'index' is put into %ebp across the function call.
Remove the index variable and reposition array_index_nospec(), so it's
calculated immediately before the array access. |
| In the Linux kernel, the following vulnerability has been resolved:
xdp: produce a warning when calculated tailroom is negative
Many ethernet drivers report xdp Rx queue frag size as being the same as
DMA write size. However, the only user of this field, namely
bpf_xdp_frags_increase_tail(), clearly expects a truesize.
Such difference leads to unspecific memory corruption issues under certain
circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when
running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses
all DMA-writable space in 2 buffers. This would be fine, if only
rxq->frag_size was properly set to 4K, but value of 3K results in a
negative tailroom, because there is a non-zero page offset.
We are supposed to return -EINVAL and be done with it in such case, but due
to tailroom being stored as an unsigned int, it is reported to be somewhere
near UINT_MAX, resulting in a tail being grown, even if the requested
offset is too much (it is around 2K in the abovementioned test). This later
leads to all kinds of unspecific calltraces.
[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6
[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4
[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]
[ 7340.339230] in xskxceiver[42b5,400000+69000]
[ 7340.340300] likely on CPU 6 (core 0, socket 6)
[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe
[ 7340.340888] likely on CPU 3 (core 0, socket 3)
[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7
[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI
[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)
[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80
[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89
[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202
[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010
[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff
[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0
[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0
[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500
[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000
[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0
[ 7340.421237] PKRU: 55555554
[ 7340.421623] Call Trace:
[ 7340.421987] <TASK>
[ 7340.422309] ? softleaf_from_pte+0x77/0xa0
[ 7340.422855] swap_pte_batch+0xa7/0x290
[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270
[ 7340.424102] zap_pte_range+0x281/0x580
[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240
[ 7340.425177] unmap_page_range+0x24d/0x420
[ 7340.425714] unmap_vmas+0xa1/0x180
[ 7340.426185] exit_mmap+0xe1/0x3b0
[ 7340.426644] __mmput+0x41/0x150
[ 7340.427098] exit_mm+0xb1/0x110
[ 7340.427539] do_exit+0x1b2/0x460
[ 7340.427992] do_group_exit+0x2d/0xc0
[ 7340.428477] get_signal+0x79d/0x7e0
[ 7340.428957] arch_do_signal_or_restart+0x34/0x100
[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0
[ 7340.430159] do_syscall_64+0x188/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: Do not allow userspace to trivially triger kernel warnings
Userspace can either deliberately pass in the too small num_fences, or the
required number can legitimately grow between the two calls to the userq
wait ioctl. In both cases we do not want the emit the kernel warning
backtrace since nothing is wrong with the kernel and userspace will simply
get an errno reported back. So lets simply drop the WARN_ONs.
(cherry picked from commit 2c333ea579de6cc20ea7bc50e9595ef72863e65c) |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb: f81604: handle short interrupt urb messages properly
If an interrupt urb is received that is not the correct length, properly
detect it and don't attempt to treat the data as valid. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/mbox: validate payload size before accessing contents in cxl_payload_from_user_allowed()
cxl_payload_from_user_allowed() casts and dereferences the input
payload without first verifying its size. When a raw mailbox command
is sent with an undersized payload (ie: 1 byte for CXL_MBOX_OP_CLEAR_LOG,
which expects a 16-byte UUID), uuid_equal() reads past the allocated buffer,
triggering a KASAN splat:
BUG: KASAN: slab-out-of-bounds in memcmp+0x176/0x1d0 lib/string.c:683
Read of size 8 at addr ffff88810130f5c0 by task syz.1.62/2258
CPU: 2 UID: 0 PID: 2258 Comm: syz.1.62 Not tainted 6.19.0-dirty #3 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xab/0xe0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xce/0x650 mm/kasan/report.c:482
kasan_report+0xce/0x100 mm/kasan/report.c:595
memcmp+0x176/0x1d0 lib/string.c:683
uuid_equal include/linux/uuid.h:73 [inline]
cxl_payload_from_user_allowed drivers/cxl/core/mbox.c:345 [inline]
cxl_mbox_cmd_ctor drivers/cxl/core/mbox.c:368 [inline]
cxl_validate_cmd_from_user drivers/cxl/core/mbox.c:522 [inline]
cxl_send_cmd+0x9c0/0xb50 drivers/cxl/core/mbox.c:643
__cxl_memdev_ioctl drivers/cxl/core/memdev.c:698 [inline]
cxl_memdev_ioctl+0x14f/0x190 drivers/cxl/core/memdev.c:713
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa8/0x330 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fdaf331ba79
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdaf1d77038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fdaf3585fa0 RCX: 00007fdaf331ba79
RDX: 00002000000001c0 RSI: 00000000c030ce02 RDI: 0000000000000003
RBP: 00007fdaf33749df R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fdaf3586038 R14: 00007fdaf3585fa0 R15: 00007ffced2af768
</TASK>
Add 'in_size' parameter to cxl_payload_from_user_allowed() and validate
the payload is large enough. |
