| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Jenkins Credentials Binding Plugin 720.v3f6decef43ea_ and earlier does not properly sanitize file names for file and zip file credentials, allowing attackers able to provide credentials to a job to write files to arbitrary locations on the node filesystem, which can lead to remote code execution if Jenkins is configured to allow a low-privileged user to configure file or zip file credentials used for a job running on the built-in node. |
| Improper Certificate Validation vulnerability in Erlang OTP public_key (pubkey_cert and public_key modules) allows a DNS nameConstraints bypass via subject CommonName fallback in TLS hostname verification.
Two flaws combine to allow a subordinate CA whose DNS nameConstraints are restricted (e.g. permitted;DNS:allowed.example.com) to issue a leaf certificate that an OTP TLS client accepts as a valid identity for an out-of-scope hostname (e.g. victim.example.com):
First, pubkey_cert:validate_names/6 in lib/public_key/src/pubkey_cert.erl only checks SAN DNS entries against nameConstraints. Per RFC 5280, a permitted DNS subtree only restricts certificates that contain a DNS-typed name. A leaf with no subjectAltName therefore trivially satisfies any permitted;DNS:... constraint regardless of its subject commonName.
Second, public_key:pkix_verify_hostname/3 in lib/public_key/src/public_key.erl falls back to the subject commonName when no subjectAltName is present, extracting id-at-commonName attributes as presented IDs and matching them against the reference hostname. The strict pkix_verify_hostname_match_fun(https) matcher does not suppress this fallback.
The result is that path validation accepts a CN-only leaf under a DNS-constrained intermediate (no SAN means the nameConstraints are not triggered), and hostname verification then accepts it via the CN fallback. The bypass is reachable from stock ssl:connect with verify_peer, a trusted CA, SNI, and the canonical strict https hostname matcher.
This issue affects OTP from OTP 19.3 before OTP 26.2.5.21, 27.3.4.12, 28.5.0.1, and 29.0.1 corresponding to public_key from 1.4 before 1.15.1.7, 1.17.1.3, 1.20.3.1, and 1.21.1. |
| Budibase is an open-source low-code platform. Prior to 3.38.1, the POST /api/global/users/onboard endpoint is protected by workspaceBuilderOrAdmin middleware, allowing any user with builder permissions to access it. When SMTP email is not configured (the default for self-hosted Budibase instances), this endpoint bypasses the admin-restricted invite flow and directly creates users via bulkCreate, accepting arbitrary admin and builder role assignments from the request body. A builder-level user can create a new global admin account and receive the generated password in the response, achieving full privilege escalation. This vulnerability is fixed in 3.38.1. |
| A vulnerability was determined in SourceCodester Student Grades Management System 1.0. Affected by this vulnerability is the function getClassroomStudents/removeStudentFromClassroom of the file classroom.php. Executing a manipulation of the argument classroom_id can lead to improper authorization. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. |
| A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function setParentalRules of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Executing a manipulation of the argument enable can lead to os command injection. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. |
| Budibase is an open-source low-code platform. Prior to 3.35.4, the buildMatcherRegex() / matches() functions in packages/backend-core/src/middleware/matchers.ts route patterns are compiled into unanchored regular expressions and tested against ctx.request.url, which includes the full query string. The CSRF middleware in the Budibase Worker uses this matching system to decide whether to skip CSRF token validation. An unauthenticated attacker can forge state-changing cross-origin requests against any Worker API endpoint by injecting a public route pattern into the query string, causing the CSRF middleware to skip token validation entirely. This allows actions such as sending admin invites, modifying global configuration, and managing users without a valid CSRF token. This vulnerability is fixed in 3.35.4. |
| RELATE is a web-based courseware package. Prior to commit d66ba5659b459bf1ba56b7109b5f9ecf197cbefb, RELATE LMS configures its Celery workers to accept and deserialize untrusted 'pickle' data. An attacker who can reach the message broker can execute arbitrary commands on the host server. Combined with missing network isolation in the code execution sandbox, this allows an authenticated student to achieve full Remote Code Execution (RCE) on the host system. Commit d66ba5659b459bf1ba56b7109b5f9ecf197cbefb fixes the issue. |
| Budibase is an open-source low-code platform. Prior to 3.39.0, the executeQuery automation step in Budibase accepts a queryId from automation step inputs and passes it directly to the query execution controller without additional validation. When combined with a REST datasource configured to target internal infrastructure, this creates a server-side request forgery path where automation execution causes the Budibase server to make outbound HTTP requests to attacker-influenced destinations. The automation output then returns the response, potentially exposing internal service data. This vulnerability is fixed in 3.39.0. |
| RELATE is a web-based courseware package. Versions prior to commit 555f0efb1c5bd7531c07cd73724d7e566a81f620 have a stored cross-site scripting vulnerability that allows any enrolled student to execute arbitrary JavaScript in an administrator's browser session, potentially leading to full admin account takeover. The `get_user()` method in `ParticipationAdmin` renders user-controlled input using `mark_safe` combined with Python's % string formatting. This bypasses Django\'s automatic HTML escaping entirely. The value returned by `get_full_name` is derived directly from the `first_name` and `last_name` fields of the User model. These fields are freely editable by any authenticated user through the profile page (`/profile/`) with no sanitization applied. When an admin views the Participation list in the Django admin panel, the unsanitized value is rendered directly into the HTML response, causing the injected script to execute in the admin's browser. Commit 555f0efb1c5bd7531c07cd73724d7e566a81f620 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ks8851: Reinstate disabling of BHs around IRQ handler
If the driver executes ks8851_irq() AND a TX packet has been sent, then
the driver enables TX queue via netif_wake_queue() which schedules TX
softirq to queue packets for this device.
If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by
the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to
allocate SKBs for the received packets. If netdev_alloc_skb_ip_align()
is called with BH enabled, then local_bh_enable() at the end of
netdev_alloc_skb_ip_align() will trigger the pending softirq processing,
which may ultimately call the .xmit callback ks8851_start_xmit_par().
The ks8851_start_xmit_par() will try to lock struct ks8851_net_par
.lock spinlock, which is already locked by ks8851_irq() from which
ks8851_start_xmit_par() was called. This leads to a deadlock, which
is reported by the kernel, including a trace listed below.
If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0
("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock
can also be triggered without received packet in the RX FIFO. The
pending softirqs will be processed on return from
spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the
deadlock as well.
Fix the problem by disabling BH around critical sections, including the
IRQ handler, thus preventing the net_tx_action() softirq from triggering
during these critical sections. The net_tx_action() softirq is triggered
once BH are re-enabled and at the end of the IRQ handler, once all the
other IRQ handler actions have been completed.
__schedule from schedule_rtlock+0x1c/0x34
schedule_rtlock from rtlock_slowlock_locked+0x548/0x904
rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c
rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8
ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44
netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188
dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c
sch_direct_xmit from __qdisc_run+0x1f8/0x4ec
__qdisc_run from qdisc_run+0x1c/0x28
qdisc_run from net_tx_action+0x1f0/0x268
net_tx_action from handle_softirqs+0x1a4/0x270
handle_softirqs from __local_bh_enable_ip+0xcc/0xe0
__local_bh_enable_ip from __alloc_skb+0xd8/0x128
__alloc_skb from __netdev_alloc_skb+0x3c/0x19c
__netdev_alloc_skb from ks8851_irq+0x388/0x4d4
ks8851_irq from irq_thread_fn+0x24/0x64
irq_thread_fn from irq_thread+0x178/0x28c
irq_thread from kthread+0x12c/0x138
kthread from ret_from_fork+0x14/0x28 |
| FacturaScripts is an open source accounting and invoicing software. In 2025.81 and earlier, an authenticated unrestricted file upload vulnerability exists in FacturaScripts' product image upload functionality. An attacker with valid credentials can upload a PHP file disguised as a GIF image (using a GIF89a header), bypassing MIME type validation. The file is stored with its original extension, including executable extensions such as .php. The vulnerability exists the addImageAction() method of Core/Lib/ExtendedController/ProductImagesTrait.php. |
| FacturaScripts is an open source accounting and invoicing software. Prior to v2026, an unauthenticated information disclosure vulnerability in the Installer controller allows any remote attacker to trigger phpinfo() on a fresh FacturaScripts deployment by requesting /?phpinfo=TRUE, exposing full PHP configuration, server environment variables (including any database credentials, API keys, or application secrets set as env vars), filesystem paths, and loaded extensions without being authenticated. This vulnerability is fixed in v2026. |
| Frappe HR is an open-source human resources management solution (HRMS). Prior to 16.5.0, authenticated employees could access other employees’ leave details due to improper authorization checks. This vulnerability is fixed in 16.5.0. |
| Kysely is a type-safe TypeScript SQL query builder. From 0.26.0 to 0.28.16, DefaultQueryCompiler.visitJSONPathLeg does not escape JSON-path metacharacters (., [, ], *, **, ?). When attacker-controlled input flows into eb.ref(col, '->$').key(input) or .at(input) — including type-safe code where the JSON column is shaped like Record<string, T> so K extends string is the inferred type — every dot becomes a path-leg separator, letting an attacker traverse from the intended key into sibling and child fields the developer never meant to expose. The result is read access (and, in update statements, write access) to JSON sub-fields outside the intended scope across MySQL, PostgreSQL ->$/->>$, and SQLite. This vulnerability is fixed in 0.28.17. |
| An authenticated command injection vulnerability exists in the Archer BE450 v1 and BE7200 v1 router that allows an administrator to execute arbitrary system commands through the web management interface. After successfully authenticating to the admin interface, an attacker can leverage the browser’s developer console by supplying a crafted input that is passed to backend system commands without adequate sanitization.
Successful exploitation enables execution of arbitrary commands with elevated privileges on the device, which may allow the attacker to start unauthorized services, modify system configuration, or otherwise fully compromise the router’s operating environment. |
| A weakness has been identified in TeamSpeak 3 Server up to 3.13.7. This affects the function process_resend_queue of the component Connection State Management. This manipulation causes use after free. The attack may be initiated remotely. Upgrading to version 3.13.8 is able to mitigate this issue. The affected component should be upgraded. |
| Budibase is an open-source low-code platform. Prior to 3.39.0, fetchToken in the OAuth2 SDK makes a POST to a builder-supplied URL with plain node-fetch, skipping the blacklist.isBlacklisted check that every other outbound fetch path in the codebase uses. The Joi schema for the OAuth2 URL has no scheme or host restriction. This vulnerability is fixed in 3.39.0. |
| Budibase is an open-source low-code platform. Prior to 3.39.0, /api/public/v1/roles/assign is guarded by the builderOrAdmin middleware, which passes any user who is a builder for the app id in the x-budibase-app-id header. That check admits both global builders and workspace-scoped builders (builder.apps set but builder.global unset). The controller then spreads the request body into the SDK call, and the SDK grants builder.global=true or admin.global=true on whichever user ids the caller supplies. Bob, a workspace-scoped builder with an API key, promotes himself or any other user to global admin with one POST. The whole flow is tenant-wide privilege escalation from an app-level role, available to anyone with an Enterprise license that unlocks the EXPANDED_PUBLIC_API feature. This vulnerability is fixed in 3.39.0. |
| Budibase is an open-source low-code platform. Prior to 3.38.2, the file upload endpoint POST /api/attachments/process does not enforce active-content restrictions for authenticated users. The checks for dangerous file extensions are conditionally wrapped inside if (isPublicUser) or if (isPublicUser || !env.SELF_HOSTED), meaning any authenticated builder can upload executable web content — SVG files with inline <script> tags, HTML pages with JavaScript, .js modules — which are then stored in the object store (MinIO/S3) with their correct MIME types. When the resulting signed URL is opened by any app user, the browser executes the payload. Impact is persistent stored XSS over all application end users. This vulnerability is fixed in 3.38.2. |
| Budibase is an open-source low-code platform. Prior to 3.38.1, Budibase exposes a REST API for datasource management. The route PUT /api/datasources/:datasourceId is registered in the authorizedRoutes group with TABLE/READ permission. This is the same authorization level as the read endpoint (GET /api/datasources/:datasourceId). Every authenticated Budibase app user with the BASIC built-in role or higher carries TABLE/WRITE (and therefore TABLE/READ) permissions, and the datasource update controller performs no additional builder check. As a result, any authenticated non-builder app user can submit a PUT request to rewrite a datasource's config object — including the connection host, port, database credentials, or the base url of a REST datasource. Because no network-level SSRF protection is applied to SQL driver connections, redirecting a PostgreSQL/MySQL/MongoDB datasource to an internal IP address succeeds and the attacker can probe or interact with internal services on arbitrary ports. This vulnerability is fixed in 3.38.1. |
