| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Add bounds check on pat_index to prevent OOB kernel read in madvise
When user provides a bogus pat_index value through the madvise IOCTL, the
xe_pat_index_get_coh_mode() function performs an array access without
validating bounds. This allows a malicious user to trigger an out-of-bounds
kernel read from the xe->pat.table array.
The vulnerability exists because the validation in madvise_args_are_sane()
directly calls xe_pat_index_get_coh_mode(xe, args->pat_index.val) without
first checking if pat_index is within [0, xe->pat.n_entries).
Although xe_pat_index_get_coh_mode() has a WARN_ON to catch this in debug
builds, it still performs the unsafe array access in production kernels.
v2(Matthew Auld)
- Using array_index_nospec() to mitigate spectre attacks when the value
is used
v3(Matthew Auld)
- Put the declarations at the start of the block
(cherry picked from commit 944a3329b05510d55c69c2ef455136e2fc02de29) |
| Use after free in Views in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Address thermal zone removal races with resume
Since thermal_zone_pm_complete() and thermal_zone_device_resume()
re-initialize the poll_queue delayed work for the given thermal zone,
the cancel_delayed_work_sync() in thermal_zone_device_unregister()
may miss some already running work items and the thermal zone may
be freed prematurely [1].
There are two failing scenarios that both start with
running thermal_pm_notify_complete() right before invoking
thermal_zone_device_unregister() for one of the thermal zones.
In the first scenario, there is a work item already running for
the given thermal zone when thermal_pm_notify_complete() calls
thermal_zone_pm_complete() for that thermal zone and it continues to
run when thermal_zone_device_unregister() starts. Since the poll_queue
delayed work has been re-initialized by thermal_pm_notify_complete(), the
running work item will be missed by the cancel_delayed_work_sync() in
thermal_zone_device_unregister() and if it continues to run past the
freeing of the thermal zone object, a use-after-free will occur.
In the second scenario, thermal_zone_device_resume() queued up by
thermal_pm_notify_complete() runs right after the thermal_zone_exit()
called by thermal_zone_device_unregister() has returned. The poll_queue
delayed work is re-initialized by it before cancel_delayed_work_sync() is
called by thermal_zone_device_unregister(), so it may continue to run
after the freeing of the thermal zone object, which also leads to a
use-after-free.
Address the first failing scenario by ensuring that no thermal work
items will be running when thermal_pm_notify_complete() is called.
For this purpose, first move the cancel_delayed_work() call from
thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent
new work from entering the workqueue going forward. Next, switch
over to using a dedicated workqueue for thermal events and update
the code in thermal_pm_notify() to flush that workqueue after
thermal_pm_notify_prepare() has returned which will take care of
all leftover thermal work already on the workqueue (that leftover
work would do nothing useful anyway because all of the thermal zones
have been flagged as suspended).
The second failing scenario is addressed by adding a tz->state check
to thermal_zone_device_resume() to prevent it from re-initializing
the poll_queue delayed work if the thermal zone is going away.
Note that the above changes will also facilitate relocating the suspend
and resume of thermal zones closer to the suspend and resume of devices,
respectively. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: Fix resource leaks on errors in gpiochip_add_data_with_key()
Since commit aab5c6f20023 ("gpio: set device type for GPIO chips"),
`gdev->dev.release` is unset. As a result, the reference count to
`gdev->dev` isn't dropped on the error handling paths.
Drop the reference on errors.
Also reorder the instructions to make the error handling simpler.
Now gpiochip_add_data_with_key() roughly looks like:
>>> Some memory allocation. Go to ERR ZONE 1 on errors.
>>> device_initialize().
gpiodev_release() takes over the responsibility for freeing the
resources of `gdev->dev`. The subsequent error handling paths
shouldn't go through ERR ZONE 1 again which leads to double free.
>>> Some initialization mainly on `gdev`.
>>> The rest of initialization. Go to ERR ZONE 2 on errors.
>>> Chip registration success and exit.
>>> ERR ZONE 2. gpio_device_put() and exit.
>>> ERR ZONE 1. |
| Inappropriate implementation in Media in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 15.8.5 and iPadOS 15.8.5, iOS 16.7.12 and iPadOS 16.7.12, iOS 18.6.2 and iPadOS 18.6.2, iPadOS 17.7.10, macOS Sequoia 15.6.1, macOS Sonoma 14.7.8, macOS Ventura 13.7.8. Processing a malicious image file may result in memory corruption. Apple is aware of a report that this issue may have been exploited in an extremely sophisticated attack against specific targeted individuals. |
| Sensitive data exposure leading to admin/WLAN credential leak in ZTE ZXHN H298A 1.1 and H108N 2.6. A crafted request to the router web interface can expose sensitive device and account information. In affected builds, the response may include the administrator password and WLAN PSK, enabling authentication bypass and network compromise. Some firmware versions may expose only partial identifiers (e.g., serial number, ESSID, MAC addresses). |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: move wait_on_sem() out of spinlock
With iommu.strict=1, the existing completion wait path can cause soft
lockups under stressed environment, as wait_on_sem() busy-waits under the
spinlock with interrupts disabled.
Move the completion wait in iommu_completion_wait() out of the spinlock.
wait_on_sem() only polls the hardware-updated cmd_sem and does not require
iommu->lock, so holding the lock during the busy wait unnecessarily
increases contention and extends the time with interrupts disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
media: qcom: camss: vfe: Fix out-of-bounds access in vfe_isr_reg_update()
vfe_isr() iterates using MSM_VFE_IMAGE_MASTERS_NUM(7) as the loop
bound and passes the index to vfe_isr_reg_update(). However,
vfe->line[] array is defined with VFE_LINE_NUM_MAX(4):
struct vfe_line line[VFE_LINE_NUM_MAX];
When index is 4, 5, 6, the access to vfe->line[line_id] exceeds
the array bounds and resulting in out-of-bounds memory access.
Fix this by using separate loops for output lines and write masters. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: Add support for TSV110 Spectre-BHB mitigation
The TSV110 processor is vulnerable to the Spectre-BHB (Branch History
Buffer) attack, which can be exploited to leak information through
branch prediction side channels. This commit adds the MIDR of TSV110
to the list for software mitigation. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: fiemap page fault fix
In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode
glock. This can lead to recursive glock taking if the fiemap buffer is
memory mapped to the same inode and accessing it triggers a page fault.
Fix by disabling page faults for iomap_fiemap() and faulting in the
buffer by hand if necessary.
Fixes xfstest generic/742. |
| Insufficient validation of untrusted input in Dialog in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) |
| A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process. |
| Memory safety bugs present in Firefox 150.0.1. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150.0.2. |
| Daptin is a GraphQL/JSON-API headless CMS. Prior to version 0.11.5, processFuzzySearch in server/resource/resource_findallpaginated.go:1484 splits the user-supplied column parameter by comma and interpolates each segment directly into goqu.L(fmt.Sprintf("LOWER(%s) LIKE ?", prefix+col)) raw SQL with no column whitelist check. The entry point is GET /api/<entity> with operator=fuzzy (or fuzzy_any, fuzzy_all). Any authenticated user — including one who self-registered with no admin involvement — can read the entire database. This issue has been patched in version 0.11.5. |
| RELATE is a web-based courseware package. Prior to commit 2f68e16, RELATE is vulnerable to predictable token generation in auth.py's make_sign_in_key() function and exam.py's gen_ticket_code() function. This issue has been patched via commit 2f68e16. |
| fast-xml-parser allows users to process XML from JS object without C/C++ based libraries or callbacks. Prior to version 5.7.0, XMLBuilder does not escape the "-->" sequence in comment content or the "]]>" sequence in CDATA sections when building XML from JavaScript objects. This allows XML injection when user-controlled data flows into comments or CDATA elements, leading to XSS, SOAP injection, or data manipulation. This issue has been patched in version 5.7.0. |
| Wallos is an open-source, self-hostable personal subscription tracker. In versions 4.8.4 and prior, the incomplete SSRF fix in Wallos validates webhook URLs via gethostbyname() but passes the original hostname to cURL without CURLOPT_RESOLVE pinning on 10 of 11 outbound HTTP endpoints, leaving a DNS rebinding TOCTOU window. At time of publication, there are no publicly available patches. |
| Wallos is an open-source, self-hostable personal subscription tracker. In versions 4.8.4 and prior, the webhook notification feature reuses an administrator-configured local-target allowlist for every logged-in user. Any normal user can fully control a webhook URL, headers, and body, then use Wallos to send server-side requests to allowlisted internal automation services. When such a target exposes deployment or execution APIs, this can further enable adjacent-service RCE, but that downstream result is conditional on the target service. At time of publication, there are no publicly available patches. |
| Daptin is a GraphQL/JSON-API headless CMS. Prior to version 0.11.4, the /aggregate/:typename endpoint accepted column and group query parameters that were passed verbatim to goqu.L() — a raw SQL literal expression builder — without any validation. This bypassed all parameterization and allowed authenticated users with any valid session to inject arbitrary SQL expressions. This issue has been patched in version 0.11.4. |
