| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: fix null-pointer dereference on local read error
In drbd_request_endio(), READ_COMPLETED_WITH_ERROR is passed to
__req_mod() with a NULL peer_device:
__req_mod(req, what, NULL, &m);
The READ_COMPLETED_WITH_ERROR handler then unconditionally passes this
NULL peer_device to drbd_set_out_of_sync(), which dereferences it,
causing a null-pointer dereference.
Fix this by obtaining the peer_device via first_peer_device(device),
matching how drbd_req_destroy() handles the same situation. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not free data reservation in fallback from inline due to -ENOSPC
If we fail to create an inline extent due to -ENOSPC, we will attempt to
go through the normal COW path, reserve an extent, create an ordered
extent, etc. However we were always freeing the reserved qgroup data,
which is wrong since we will use data. Fix this by freeing the reserved
qgroup data in __cow_file_range_inline() only if we are not doing the
fallback (ret is <= 0). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_gate: snapshot parameters with RCU on replace
The gate action can be replaced while the hrtimer callback or dump path is
walking the schedule list.
Convert the parameters to an RCU-protected snapshot and swap updates under
tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits
the entry list, preserve the existing schedule so the effective state is
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: Fix a hmm_range_fault() livelock / starvation problem
If hmm_range_fault() fails a folio_trylock() in do_swap_page,
trying to acquire the lock of a device-private folio for migration,
to ram, the function will spin until it succeeds grabbing the lock.
However, if the process holding the lock is depending on a work
item to be completed, which is scheduled on the same CPU as the
spinning hmm_range_fault(), that work item might be starved and
we end up in a livelock / starvation situation which is never
resolved.
This can happen, for example if the process holding the
device-private folio lock is stuck in
migrate_device_unmap()->lru_add_drain_all()
sinc lru_add_drain_all() requires a short work-item
to be run on all online cpus to complete.
A prerequisite for this to happen is:
a) Both zone device and system memory folios are considered in
migrate_device_unmap(), so that there is a reason to call
lru_add_drain_all() for a system memory folio while a
folio lock is held on a zone device folio.
b) The zone device folio has an initial mapcount > 1 which causes
at least one migration PTE entry insertion to be deferred to
try_to_migrate(), which can happen after the call to
lru_add_drain_all().
c) No or voluntary only preemption.
This all seems pretty unlikely to happen, but indeed is hit by
the "xe_exec_system_allocator" igt test.
Resolve this by waiting for the folio to be unlocked if the
folio_trylock() fails in do_swap_page().
Rename migration_entry_wait_on_locked() to
softleaf_entry_wait_unlock() and update its documentation to
indicate the new use-case.
Future code improvements might consider moving
the lru_add_drain_all() call in migrate_device_unmap() to be
called *after* all pages have migration entries inserted.
That would eliminate also b) above.
v2:
- Instead of a cond_resched() in hmm_range_fault(),
eliminate the problem by waiting for the folio to be unlocked
in do_swap_page() (Alistair Popple, Andrew Morton)
v3:
- Add a stub migration_entry_wait_on_locked() for the
!CONFIG_MIGRATION case. (Kernel Test Robot)
v4:
- Rename migrate_entry_wait_on_locked() to
softleaf_entry_wait_on_locked() and update docs (Alistair Popple)
v5:
- Add a WARN_ON_ONCE() for the !CONFIG_MIGRATION
version of softleaf_entry_wait_on_locked().
- Modify wording around function names in the commit message
(Andrew Morton)
(cherry picked from commit a69d1ab971a624c6f112cea61536569d579c3215) |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: only call xf{array,blob}_destroy if we have a valid pointer
Only call the xfarray and xfblob destructor if we have a valid pointer,
and be sure to null out that pointer afterwards. Note that this patch
fixes a large number of commits, most of which were merged between 6.9
and 6.10. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Enable exception fixup for specific ADE subcode
This patch allows the LoongArch BPF JIT to handle recoverable memory
access errors generated by BPF_PROBE_MEM* instructions.
When a BPF program performs memory access operations, the instructions
it executes may trigger ADEM exceptions. The kernel’s built-in BPF
exception table mechanism (EX_TYPE_BPF) will generate corresponding
exception fixup entries in the JIT compilation phase; however, the
architecture-specific trap handling function needs to proactively call
the common fixup routine to achieve exception recovery.
do_ade(): fix EX_TYPE_BPF memory access exceptions for BPF programs,
ensure safe execution.
Relevant test cases: illegal address access tests in module_attach and
subprogs_extable of selftests/bpf. |
| NVIDIA BioNeMo Core for Linux contains a vulnerability where a user could cause a path traversal by loading a malicious file. A successful exploit of this vulnerability might lead to code execution, denial of service, information disclosure, and data tampering. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: fix infinite loop triggered by zero-sized ATTR_LIST
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an ATTR_LIST attribute
indicates a zero data size while the driver allocates memory for it.
When ntfs_load_attr_list() processes a resident ATTR_LIST with data_size set
to zero, it still allocates memory because of al_aligned(0). This creates an
inconsistent state where ni->attr_list.size is zero, but ni->attr_list.le is
non-null. This causes ni_enum_attr_ex to incorrectly assume that no attribute
list exists and enumerates only the primary MFT record. When it finds
ATTR_LIST, the code reloads it and restarts the enumeration, repeating
indefinitely. The mount operation never completes, hanging the kernel thread.
This patch adds validation to ensure that data_size is non-zero before memory
allocation. When a zero-sized ATTR_LIST is detected, the function returns
-EINVAL, preventing a DoS vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled
When the Remote System Update (RSU) isn't enabled in the First Stage
Boot Loader (FSBL), the driver encounters a NULL pointer dereference when
excute svc_normal_to_secure_thread() thread, resulting in a kernel panic:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
Mem abort info:
...
Data abort info:
...
[0000000000000008] user address but active_mm is swapper
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 79 Comm: svc_smc_hvc_thr Not tainted 6.19.0-rc8-yocto-standard+ #59 PREEMPT
Hardware name: SoCFPGA Stratix 10 SoCDK (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : svc_normal_to_secure_thread+0x38c/0x990
lr : svc_normal_to_secure_thread+0x144/0x990
...
Call trace:
svc_normal_to_secure_thread+0x38c/0x990 (P)
kthread+0x150/0x210
ret_from_fork+0x10/0x20
Code: 97cfc113 f9400260 aa1403e1 f9400400 (f9400402)
---[ end trace 0000000000000000 ]---
The issue occurs because rsu_send_async_msg() fails when RSU is not enabled
in firmware, causing the channel to be freed via stratix10_svc_free_channel().
However, the probe function continues execution and registers
svc_normal_to_secure_thread(), which subsequently attempts to access the
already-freed channel, triggering the NULL pointer dereference.
Fix this by properly cleaning up the async client and returning early on
failure, preventing the thread from being used with an invalid channel. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/sync: Cleanup partially initialized sync on parse failure
xe_sync_entry_parse() can allocate references (syncobj, fence, chain fence,
or user fence) before hitting a later failure path. Several of those paths
returned directly, leaving partially initialized state and leaking refs.
Route these error paths through a common free_sync label and call
xe_sync_entry_cleanup(sync) before returning the error.
(cherry picked from commit f939bdd9207a5d1fc55cced5459858480686ce22) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/sync: Fix user fence leak on alloc failure
When dma_fence_chain_alloc() fails, properly release the user fence
reference to prevent a memory leak.
(cherry picked from commit a5d5634cde48a9fcd68c8504aa07f89f175074a0) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: samsung-dsim: Fix memory leak in error path
In samsung_dsim_host_attach(), drm_bridge_add() is called to add the
bridge. However, if samsung_dsim_register_te_irq() or
pdata->host_ops->attach() fails afterwards, the function returns
without removing the bridge, causing a memory leak.
Fix this by adding proper error handling with goto labels to ensure
drm_bridge_remove() is called in all error paths. Also ensure that
samsung_dsim_unregister_te_irq() is called if the attach operation
fails after the TE IRQ has been registered.
samsung_dsim_unregister_te_irq() function is moved without changes
to be before samsung_dsim_host_attach() to avoid forward declaration. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: add upper bound check on user inputs in wait ioctl
Huge input values in amdgpu_userq_wait_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
v2: squash in Srini's fix
(cherry picked from commit fcec012c664247531aed3e662f4280ff804d1476) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: Fix reference leak in amdgpu_userq_wait_ioctl
Drop reference to syncobj and timeline fence when aborting the ioctl due
output array being too small.
(cherry picked from commit 68951e9c3e6bb22396bc42ef2359751c8315dd27) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: add upper bound check on user inputs in signal ioctl
Huge input values in amdgpu_userq_signal_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
(cherry picked from commit be267e15f99bc97cbe202cd556717797cdcf79a5) |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: intel_pstate: Fix NULL pointer dereference in update_cpu_qos_request()
The update_cpu_qos_request() function attempts to initialize the 'freq'
variable by dereferencing 'cpudata' before verifying if the 'policy'
is valid.
This issue occurs on systems booted with the "nosmt" parameter, where
all_cpu_data[cpu] is NULL for the SMT sibling threads. As a result,
any call to update_qos_requests() will result in a NULL pointer
dereference as the code will attempt to access pstate.turbo_freq using
the NULL cpudata pointer.
Also, pstate.turbo_freq may be updated by intel_pstate_get_hwp_cap()
after initializing the 'freq' variable, so it is better to defer the
'freq' until intel_pstate_get_hwp_cap() has been called.
Fix this by deferring the 'freq' assignment until after the policy and
driver_data have been validated.
[ rjw: Added one paragraph to the changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
nsfs: tighten permission checks for ns iteration ioctls
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Use u32 for non-negative values in ceph_monmap_decode()
This patch fixes unnecessary implicit conversions that change signedness
of blob_len and num_mon in ceph_monmap_decode().
Currently blob_len and num_mon are (signed) int variables. They are used
to hold values that are always non-negative and get assigned in
ceph_decode_32_safe(), which is meant to assign u32 values. Both
variables are subsequently used as unsigned values, and the value of
num_mon is further assigned to monmap->num_mon, which is of type u32.
Therefore, both variables should be of type u32. This is especially
relevant for num_mon. If the value read from the incoming message is
very large, it is interpreted as a negative value, and the check for
num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to
allocate a very large chunk of memory for monmap, which will most likely
fail. In this case, an unnecessary attempt to allocate memory is
performed, and -ENOMEM is returned instead of -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here. |
