| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| VB-Audio Matrix and Matrix Coconut (versions ending in 1.0.2.2 and 2.0.2.2 and earlier, respectively), contain a local privilege escalation vulnerability in the VBMatrix VAIO virtual audio driver (vbmatrixvaio64*_win10.sys). The driver allocates a 128-byte non-paged pool buffer and, upon receiving IOCTL 0x222060, maps it into user space using an MDL and MmMapLockedPagesSpecifyCache. Because the allocation size is not page-aligned, the mapping exposes the entire 0x1000-byte kernel page containing the buffer plus adjacent non-paged pool allocations with read/write permissions. An unprivileged local attacker can open a device handle (using the required 0x800 attribute flag), invoke the IOCTL to obtain the mapping, and then read or modify live kernel objects and pointers present on that page. This enables bypass of KASLR, arbitrary kernel memory read/write within the exposed page, corruption of kernel objects, and escalation to SYSTEM. |
| BigBlueButton is an open-source virtual classroom. In versions 3.0.21 and below, the official documentation for "Server Customization" on Support for ClamAV as presentation file scanner contains instructions that leave a BBB server vulnerable for Denial of Service. The flawed command exposes both ports (3310 and 7357) to the internet. A remote attacker can use this to send complex or large documents to clamd and waste server resources, or shutdown the clamd process. The clamd documentation explicitly warns about exposing this port. Enabling ufw (ubuntu firewall) during install does not help, because Docker routes container traffic through the nat table, which is not managed or restricted by ufw. Rules installed by ufw in the filter table have no effect on docker traffic. In addition, the provided example also mounts /var/bigbluebutton with write permissions into the container, which should not be required. Future vulnerabilities in clamd may allow attackers to manipulate files in that folder. Users are unaffected unless they have opted in to follow the extra instructions from BigBlueButton's documentation. This issue has been fixed in version 3.0.22. |
| A vulnerability was identified in Docker Desktop that allows local running Linux containers to access the Docker Engine API via the configured Docker subnet, at 192.168.65.7:2375 by default. This vulnerability occurs with or without Enhanced Container Isolation (ECI) enabled, and with or without the "Expose daemon on tcp://localhost:2375 without TLS" option enabled.
This can lead to execution of a wide range of privileged commands to the engine API, including controlling other containers, creating new ones, managing images etc. In some circumstances (e.g. Docker Desktop for Windows with WSL backend) it also allows mounting the host drive with the same privileges as the user running Docker Desktop. |
| Skill Scanner is a security scanner for AI Agent Skills that detects prompt injection, data exfiltration, and malicious code patterns. A vulnerability in the API Server of Skill Scanner could allow a unauthenticated, remote attacker to interact with the server API and either trigger a denial of service (DoS) condition or upload arbitrary files. This vulnerability is due to an erroneous binding to multiple interfaces. An attacker could exploit this vulnerability by sending API requests to a device exposing the affected API Server. A successful exploit could allow the attacker to consume an excessive amount of resources (memory starvation) or to upload files to arbitrary folders on the affected device. This vulnerability affects Skill-scanner 1.0.1 and earlier releases when the API Server is enabled. The API Server is not enabled by default. Skill-scanner software releases 1.0.2 and later contain the fix for this vulnerability. |
| A flaw was found in openshift-gitops-operator-container. The openshift.io/cluster-monitoring label is applied to all namespaces that deploy an ArgoCD CR instance, allowing the namespace to create a rogue PrometheusRule. This issue can have adverse effects on the platform monitoring stack, as the rule is rolled out cluster-wide when the label is applied. |
| Error in parser function in M-Files Server versions before 22.6.11534.1 and before 22.6.11505.0 allowed unauthenticated access to some information of the underlying operating system. |
| n8n is an open source workflow automation platform. From version 1.65.0 to before 1.114.3, the use of Buffer.allocUnsafe() and Buffer.allocUnsafeSlow() in the task runner allowed untrusted code to allocate uninitialized memory. Such uninitialized buffers could contain residual data from within the same Node.js process (for example, data from prior requests, tasks, secrets, or tokens), resulting in potential information disclosure. This issue has been patched in version 1.114.3. |
| When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST. |
| Frigate is a network video recorder (NVR) with realtime local object detection for IP cameras. Prior to 0.16.4, a critical Remote Command Execution (RCE) vulnerability has been identified in the Frigate integration with go2rtc. The application does not sanitize user input in the video stream configuration (config.yaml), allowing direct injection of system commands via the exec: directive. The go2rtc service executes these commands without restrictions. This vulnerability is only exploitable by an administrator or users who have exposed their Frigate install to the open internet with no authentication which allows anyone full administrative control. This vulnerability is fixed in 0.16.4. |
| Claude Code is an agentic coding tool. Prior to version 2.1.2, Claude Code's bubblewrap sandboxing mechanism failed to properly protect the .claude/settings.json configuration file when it did not exist at startup. While the parent directory was mounted as writable and .claude/settings.local.json was explicitly protected with read-only constraints, settings.json was not protected if it was missing. This allowed malicious code running inside the sandbox to create this file and inject persistent hooks (such as SessionStart commands) that would execute with host privileges when Claude Code was restarted. This issue has been patched in version 2.1.2. |
| Hono is a Web application framework that provides support for any JavaScript runtime. Prior to version 4.11.7, Serve static Middleware for the Cloudflare Workers adapter contains an information disclosure vulnerability that may allow attackers to read arbitrary keys from the Workers environment. Improper validation of user-controlled paths can result in unintended access to internal asset keys. Version 4.11.7 contains a patch for the issue. |
| Intermediate register values of secure workloads can be exfiltrated in workloads scheduled from applications running in the non-secure environment of a platform. |
| An Exposure of Resource to Wrong Sphere vulnerability in the sampling service of Juniper Networks Junos OS Evolved allows an unauthenticated network-based attacker to send arbitrary data to the device, which leads msvcsd process to crash with limited availability impacting Denial of Service (DoS) and allows unauthorized network access to the device, potentially impacting system integrity.
This issue only happens when inline jflow is configured.
This does not impact any forwarding traffic. The impacted services MSVCS-DB app crashes momentarily and recovers by itself.
This issue affects Juniper Networks Junos OS Evolved:
* 21.4 versions earlier than 21.4R3-S7-EVO;
* 22.2 versions earlier than 22.2R3-S3-EVO;
* 22.3 versions earlier than 22.3R3-S2-EVO;
* 22.4 versions earlier than 22.4R3-EVO;
* 23.2 versions earlier than 23.2R1-S2-EVO, 23.2R2-EVO. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/entry: Mask DAIF in cpu_switch_to(), call_on_irq_stack()
`cpu_switch_to()` and `call_on_irq_stack()` manipulate SP to change
to different stacks along with the Shadow Call Stack if it is enabled.
Those two stack changes cannot be done atomically and both functions
can be interrupted by SErrors or Debug Exceptions which, though unlikely,
is very much broken : if interrupted, we can end up with mismatched stacks
and Shadow Call Stack leading to clobbered stacks.
In `cpu_switch_to()`, it can happen when SP_EL0 points to the new task,
but x18 stills points to the old task's SCS. When the interrupt handler
tries to save the task's SCS pointer, it will save the old task
SCS pointer (x18) into the new task struct (pointed to by SP_EL0),
clobbering it.
In `call_on_irq_stack()`, it can happen when switching from the task stack
to the IRQ stack and when switching back. In both cases, we can be
interrupted when the SCS pointer points to the IRQ SCS, but SP points to
the task stack. The nested interrupt handler pushes its return addresses
on the IRQ SCS. It then detects that SP points to the task stack,
calls `call_on_irq_stack()` and clobbers the task SCS pointer with
the IRQ SCS pointer, which it will also use !
This leads to tasks returning to addresses on the wrong SCS,
or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK
or FPAC if enabled.
This is possible on a default config, but unlikely.
However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and
instead the GIC is responsible for filtering what interrupts the CPU
should receive based on priority.
Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU
even in `cpu_switch_to()` and `call_on_irq_stack()`, possibly *very*
frequently depending on the system configuration and workload, leading
to unpredictable kernel panics.
Completely mask DAIF in `cpu_switch_to()` and restore it when returning.
Do the same in `call_on_irq_stack()`, but restore and mask around
the branch.
Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency
of behaviour between all configurations.
Introduce and use an assembly macro for saving and masking DAIF,
as the existing one saves but only masks IF. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fix kernel crash when hard resetting the GPU
The GPU hard reset sequence calls pm_runtime_force_suspend() and
pm_runtime_force_resume(), which according to their documentation should
only be used during system-wide PM transitions to sleep states.
The main issue though is that depending on some internal runtime PM
state as seen by pm_runtime_force_suspend() (whether the usage count is
<= 1), pm_runtime_force_resume() might not resume the device unless
needed. If that happens, the runtime PM resume callback
pvr_power_device_resume() is not called, the GPU clocks are not
re-enabled, and the kernel crashes on the next attempt to access GPU
registers as part of the power-on sequence.
Replace calls to pm_runtime_force_suspend() and
pm_runtime_force_resume() with direct calls to the driver's runtime PM
callbacks, pvr_power_device_suspend() and pvr_power_device_resume(),
to ensure clocks are re-enabled and avoid the kernel crash. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: max9286: fix kernel oops when removing module
When removing the max9286 module we get a kernel oops:
Unable to handle kernel paging request at virtual address 000000aa00000094
Mem abort info:
ESR = 0x96000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000880d85000
[000000aa00000094] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in: fsl_jr_uio caam_jr rng_core libdes caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine max9271 authenc crct10dif_ce mxc_jpeg_encdec
CPU: 2 PID: 713 Comm: rmmod Tainted: G C 5.15.5-00057-gaebcd29c8ed7-dirty #5
Hardware name: Freescale i.MX8QXP MEK (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : i2c_mux_del_adapters+0x24/0xf0
lr : max9286_remove+0x28/0xd0 [max9286]
sp : ffff800013a9bbf0
x29: ffff800013a9bbf0 x28: ffff00080b6da940 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
x23: ffff000801a5b970 x22: ffff0008048b0890 x21: ffff800009297000
x20: ffff0008048b0f70 x19: 000000aa00000064 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000014 x13: 0000000000000000 x12: ffff000802da49e8
x11: ffff000802051918 x10: ffff000802da4920 x9 : ffff000800030098
x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d
x5 : 8080808000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffffffffffffffff x1 : ffff00080b6da940 x0 : 0000000000000000
Call trace:
i2c_mux_del_adapters+0x24/0xf0
max9286_remove+0x28/0xd0 [max9286]
i2c_device_remove+0x40/0x110
__device_release_driver+0x188/0x234
driver_detach+0xc4/0x150
bus_remove_driver+0x60/0xe0
driver_unregister+0x34/0x64
i2c_del_driver+0x58/0xa0
max9286_i2c_driver_exit+0x1c/0x490 [max9286]
__arm64_sys_delete_module+0x194/0x260
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0xd4/0xfc
do_el0_svc+0x2c/0x94
el0_svc+0x28/0x80
el0t_64_sync_handler+0xa8/0x130
el0t_64_sync+0x1a0/0x1a4
The Oops happens because the I2C client data does not point to
max9286_priv anymore but to v4l2_subdev. The change happened in
max9286_init() which calls v4l2_i2c_subdev_init() later on...
Besides fixing the max9286_remove() function, remove the call to
i2c_set_clientdata() in max9286_probe(), to avoid confusion, and make
the necessary changes to max9286_init() so that it doesn't have to use
i2c_get_clientdata() in order to fetch the pointer to priv. |
| DIRAC is an interware, meaning a software framework for distributed computing. Prior to version 8.0.41, during the proxy generation process (e.g., when using `dirac-proxy-init`), it is possible for unauthorized users on the same machine to gain read access to the proxy. This allows the user to then perform any action that is possible with the original proxy. This vulnerability only exists for a short period of time (sub-millsecond) during the generation process. Version 8.0.41 contains a patch for the issue. As a workaround, setting the `X509_USER_PROXY` environment variable to a path that is inside a directory that is only readable to the current user avoids the potential risk. After the file has been written, it can be safely copied to the standard location (`/tmp/x509up_uNNNN`). |
| Use of Hardware Page Aggregation (HPA) and Stage-1 and/or Stage-2 translation on Cortex-A77, Cortex-A78, Cortex-A78C, Cortex-A78AE, Cortex-A710, Cortex-X1, Cortex-X1C, Cortex-X2, Cortex-X3, Cortex-X4, Cortex-X925, Neoverse V1, Neoverse V2, Neoverse V3, Neoverse V3AE, Neoverse N2 may permit bypass of Stage-2 translation and/or GPT protection. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/entry: Mark IRQ entries to fix stack depot warnings
The stack depot filters out everything outside of the top interrupt
context as an uninteresting or irrelevant part of the stack traces. This
helps with stack trace de-duplication, avoiding an explosion of saved
stack traces that share the same IRQ context code path but originate
from different randomly interrupted points, eventually exhausting the
stack depot.
Filtering uses in_irqentry_text() to identify functions within the
.irqentry.text and .softirqentry.text sections, which then become the
last stack trace entries being saved.
While __do_softirq() is placed into the .softirqentry.text section by
common code, populating .irqentry.text is architecture-specific.
Currently, the .irqentry.text section on s390 is empty, which prevents
stack depot filtering and de-duplication and could result in warnings
like:
Stack depot reached limit capacity
WARNING: CPU: 0 PID: 286113 at lib/stackdepot.c:252 depot_alloc_stack+0x39a/0x3c8
with PREEMPT and KASAN enabled.
Fix this by moving the IO/EXT interrupt handlers from .kprobes.text into
the .irqentry.text section and updating the kprobes blacklist to include
the .irqentry.text section.
This is done only for asynchronous interrupts and explicitly not for
program checks, which are synchronous and where the context beyond the
program check is important to preserve. Despite machine checks being
somewhat in between, they are extremely rare, and preserving context
when possible is also of value.
SVCs and Restart Interrupts are not relevant, one being always at the
boundary to user space and the other being a one-time thing.
IRQ entries filtering is also optionally used in ftrace function graph,
where the same logic applies. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: usbhid: fix info leak in hid_submit_ctrl
In hid_submit_ctrl(), the way of calculating the report length doesn't
take into account that report->size can be zero. When running the
syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to
calculate transfer_buffer_length as 16384. When this urb is passed to
the usb core layer, KMSAN reports an info leak of 16384 bytes.
To fix this, first modify hid_report_len() to account for the zero
report size case by using DIV_ROUND_UP for the division. Then, call it
from hid_submit_ctrl(). |
