Export limit exceeded: 348726 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (348726 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31719 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: krb5enc - fix async decrypt skipping hash verification krb5enc_dispatch_decrypt() sets req->base.complete as the skcipher callback, which is the caller's own completion handler. When the skcipher completes asynchronously, this signals "done" to the caller without executing krb5enc_dispatch_decrypt_hash(), completely bypassing the integrity verification (hash check). Compare with the encrypt path which correctly uses krb5enc_encrypt_done as an intermediate callback to chain into the hash computation on async completion. Fix by adding krb5enc_decrypt_done as an intermediate callback that chains into krb5enc_dispatch_decrypt_hash() upon async skcipher completion, matching the encrypt path's callback pattern. Also fix EBUSY/EINPROGRESS handling throughout: remove krb5enc_request_complete() which incorrectly swallowed EINPROGRESS notifications that must be passed up to callers waiting on backlogged requests, and add missing EBUSY checks in krb5enc_encrypt_ahash_done for the dispatch_encrypt return value. Unset MAY_BACKLOG on the async completion path so the user won't see back-to-back EINPROGRESS notifications. | ||||
| CVE-2026-31720 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: validate control request size f_audio_complete() copies req->length bytes into a 4-byte stack variable: u32 data = 0; memcpy(&data, req->buf, req->length); req->length is derived from the host-controlled USB request path, which can lead to a stack out-of-bounds write. Validate req->actual against the expected payload size for the supported control selectors and decode only the expected amount of data. This avoids copying a host-influenced length into a fixed-size stack object. | ||||
| CVE-2026-31721 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: move list and spinlock inits from bind to alloc There was an issue when you did the following: - setup and bind an hid gadget - open /dev/hidg0 - use the resulting fd in EPOLL_CTL_ADD - unbind the UDC - bind the UDC - use the fd in EPOLL_CTL_DEL When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported within remove_wait_queue (via ep_remove_wait_queue). After some debugging I found out that the queues, which f_hid registers via poll_wait were the problem. These were initialized using init_waitqueue_head inside hidg_bind. So effectively, the bind function re-initialized the queues while there were still items in them. The solution is to move the initialization from hidg_bind to hidg_alloc to extend their lifetimes to the lifetime of the function instance. Additionally, I found many other possibly problematic init calls in the bind function, which I moved as well. | ||||
| CVE-2026-43228 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hfs: Replace BUG_ON with error handling for CNID count checks In a06ec283e125 next_id, folder_count, and file_count in the super block info were expanded to 64 bits, and BUG_ONs were added to detect overflow. This triggered an error reported by syzbot: if the MDB is corrupted, the BUG_ON is triggered. This patch replaces this mechanism with proper error handling and resolves the syzbot reported bug. Singed-off-by: Jori Koolstra <jkoolstra@xs4all.nl> | ||||
| CVE-2026-43251 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: prodikeys: Check presence of pm->input_ep82 Fake USB devices can send their own report descriptors for which the input_mapping() hook does not get called. In this case, pm->input_ep82 stays NULL, which leads to a crash later. This does not happen with the real device, but can be provoked by imposing as one. | ||||
| CVE-2026-42509 | 1 Apache | 1 Wicket | 2026-05-06 | 6.1 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Apache Wicket. This issue affects Apache Wicket: from 8.0.0 through 8.17.0, 9.0.0, from 10.0.0 through 10.8.0. Users are recommended to upgrade to version 10.9.0, which fixes the issue. | ||||
| CVE-2026-31707 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate response sizes in ipc_validate_msg() ipc_validate_msg() computes the expected message size for each response type by adding (or multiplying) attacker-controlled fields from the daemon response to a fixed struct size in unsigned int arithmetic. Three cases can overflow: KSMBD_EVENT_RPC_REQUEST: msg_sz = sizeof(struct ksmbd_rpc_command) + resp->payload_sz; KSMBD_EVENT_SHARE_CONFIG_REQUEST: msg_sz = sizeof(struct ksmbd_share_config_response) + resp->payload_sz; KSMBD_EVENT_LOGIN_REQUEST_EXT: msg_sz = sizeof(struct ksmbd_login_response_ext) + resp->ngroups * sizeof(gid_t); resp->payload_sz is __u32 and resp->ngroups is __s32. Each addition can wrap in unsigned int; the multiplication by sizeof(gid_t) mixes signed and size_t, so a negative ngroups is converted to SIZE_MAX before the multiply. A wrapped value of msg_sz that happens to equal entry->msg_sz bypasses the size check on the next line, and downstream consumers (smb2pdu.c:6742 memcpy using rpc_resp->payload_sz, kmemdup in ksmbd_alloc_user using resp_ext->ngroups) then trust the unverified length. Use check_add_overflow() on the RPC_REQUEST and SHARE_CONFIG_REQUEST paths to detect integer overflow without constraining functional payload size; userspace ksmbd-tools grows NDR responses in 4096-byte chunks for calls like NetShareEnumAll, so a hard transport cap is unworkable on the response side. For LOGIN_REQUEST_EXT, reject resp->ngroups outside the signed [0, NGROUPS_MAX] range up front and report the error from ipc_validate_msg() so it fires at the IPC boundary; with that bound the subsequent multiplication and addition stay well below UINT_MAX. The now-redundant ngroups check and pr_err in ksmbd_alloc_user() are removed. This is the response-side analogue of aab98e2dbd64 ("ksmbd: fix integer overflows on 32 bit systems"), which hardened the request side. | ||||
| CVE-2026-31708 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL and the default QUERY_INFO path. The QUERY_INFO branch clamps qi.input_buffer_length to the server-reported OutputBufferLength and then copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but it never verifies that the flexible-array payload actually fits within rsp_iov[1].iov_len. A malicious server can return OutputBufferLength larger than the actual QUERY_INFO response, causing copy_to_user() to walk past the response buffer and expose adjacent kernel heap to userspace. Guard the QUERY_INFO copy with a bounds check on the actual Buffer payload. Use struct_size(qi_rsp, Buffer, qi.input_buffer_length) rather than an open-coded addition so the guard cannot overflow on 32-bit builds. | ||||
| CVE-2026-31710 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix dir separator in SMB1 UNIX mounts When calling cifs_mount_get_tcon() with SMB1 UNIX mounts, @cifs_sb->mnt_cifs_flags needs to be read or updated only after calling reset_cifs_unix_caps(), otherwise it might end up with missing CIFS_MOUNT_POSIXACL and CIFS_MOUNT_POSIX_PATHS bits. This fixes the wrong dir separator used in paths caused by the missing CIFS_MOUNT_POSIX_PATHS bit in cifs_sb_info::mnt_cifs_flags. | ||||
| CVE-2026-31711 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: server: fix active_num_conn leak on transport allocation failure Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()") addressed the kthread_run() failure path. The earlier alloc_transport() == NULL path in the same function has the same leak, is reachable pre-authentication via any TCP connect to port 445, and was empirically reproduced on UML (ARCH=um, v7.0-rc7): a small number of forced allocation failures were sufficient to put ksmbd into a state where every subsequent connection attempt was rejected for the remainder of the boot. ksmbd_kthread_fn() increments active_num_conn before calling ksmbd_tcp_new_connection() and discards the return value, so when alloc_transport() returns NULL the socket is released and -ENOMEM returned without decrementing the counter. Each such failure permanently consumes one slot from the max_connections pool; once cumulative failures reach the cap, atomic_inc_return() hits the threshold on every subsequent accept and every new connection is rejected. The counter is only reset by module reload. An unauthenticated remote attacker can drive the server toward the memory pressure that makes alloc_transport() fail by holding open connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN (0x00FFFFFF); natural transient allocation failures on a loaded host produce the same drift more slowly. Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the alloc_transport() failure path, decrement active_num_conn gated on server_conf.max_connections. Repro details: with the patch reverted, forced alloc_transport() NULL returns leaked counter slots and subsequent connection attempts -- including legitimate connects issued after the forced-fail window had closed -- were all rejected with "Limit the maximum number of connections". With this patch applied, the same connect sequence produces no rejections and the counter cycles cleanly between zero and one on every accept. | ||||
| CVE-2026-31712 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 8.3 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: require minimum ACE size in smb_check_perm_dacl() Both ACE-walk loops in smb_check_perm_dacl() only guard against an under-sized remaining buffer, not against an ACE whose declared `ace->size` is smaller than the struct it claims to describe: if (offsetof(struct smb_ace, access_req) > aces_size) break; ace_size = le16_to_cpu(ace->size); if (ace_size > aces_size) break; The first check only requires the 4-byte ACE header to be in bounds; it does not require access_req (4 bytes at offset 4) to be readable. An attacker who has set a crafted DACL on a file they own can declare ace->size == 4 with aces_size == 4, pass both checks, and then granted |= le32_to_cpu(ace->access_req); /* upper loop */ compare_sids(&sid, &ace->sid); /* lower loop */ reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES * 4 bytes). Tighten both loops to require ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE which is the smallest valid on-wire ACE layout (4-byte header + 4-byte access_req + 8-byte sid base with zero sub-auths). Also reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES before letting compare_sids() dereference sub_auth[] entries. parse_sec_desc() already enforces an equivalent check (lines 441-448); smb_check_perm_dacl() simply grew weaker validation over time. Reachability: authenticated SMB client with permission to set an ACL on a file. On a subsequent CREATE against that file, the kernel walks the stored DACL via smb_check_perm_dacl() and triggers the OOB read. Not pre-auth, and the OOB read is not reflected to the attacker, but KASAN reports and kernel state corruption are possible. | ||||
| CVE-2026-43136 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Check maxfield in hidpp_get_report_length() Do not crash when a report has no fields. Fake USB gadgets can send their own HID report descriptors and can define report structures without valid fields. This can be used to crash the kernel over USB. | ||||
| CVE-2026-31452 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: convert inline data to extents when truncate exceeds inline size Add a check in ext4_setattr() to convert files from inline data storage to extent-based storage when truncate() grows the file size beyond the inline capacity. This prevents the filesystem from entering an inconsistent state where the inline data flag is set but the file size exceeds what can be stored inline. Without this fix, the following sequence causes a kernel BUG_ON(): 1. Mount filesystem with inode that has inline flag set and small size 2. truncate(file, 50MB) - grows size but inline flag remains set 3. sendfile() attempts to write data 4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity) The crash occurs because ext4_write_inline_data() expects inline storage to accommodate the write, but the actual inline capacity (~60 bytes for i_block + ~96 bytes for xattrs) is far smaller than the file size and write request. The fix checks if the new size from setattr exceeds the inode's actual inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to extent-based storage before proceeding with the size change. This addresses the root cause by ensuring the inline data flag and file size remain consistent during truncate operations. | ||||
| CVE-2026-31692 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rtnetlink: add missing netlink_ns_capable() check for peer netns rtnl_newlink() lacks a CAP_NET_ADMIN capability check on the peer network namespace when creating paired devices (veth, vxcan, netkit). This allows an unprivileged user with a user namespace to create interfaces in arbitrary network namespaces, including init_net. Add a netlink_ns_capable() check for CAP_NET_ADMIN in the peer namespace before allowing device creation to proceed. | ||||
| CVE-2026-31451 | 1 Linux | 1 Linux Kernel | 2026-05-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio Replace BUG_ON() with proper error handling when inline data size exceeds PAGE_SIZE. This prevents kernel panic and allows the system to continue running while properly reporting the filesystem corruption. The error is logged via ext4_error_inode(), the buffer head is released to prevent memory leak, and -EFSCORRUPTED is returned to indicate filesystem corruption. | ||||
| CVE-2026-44117 | 1 Openclaw | 1 Openclaw | 2026-05-06 | 5.8 Medium |
| OpenClaw before 2026.4.20 contains a server-side request forgery vulnerability in QQBot direct media upload that skips URL validation. Attackers can bypass SSRF protections by sending crafted image URLs to uploadC2CMedia and uploadGroupMedia endpoints to relay unintended requests. | ||||
| CVE-2026-44116 | 1 Openclaw | 1 Openclaw | 2026-05-06 | 8.6 High |
| OpenClaw before 2026.4.22 contains a server-side request forgery vulnerability in the Zalo plugin's sendPhoto function that fails to validate outbound photo URLs through the SSRF guard. Attackers can bypass SSRF protection by providing malicious photo URLs to the Zalo Bot API, enabling unauthorized access to internal resources. | ||||
| CVE-2026-44115 | 1 Openclaw | 1 Openclaw | 2026-05-06 | 8.8 High |
| OpenClaw before 2026.4.22 contains an exec allowlist analysis vulnerability allowing shell expansion hiding in unquoted heredoc bodies. Attackers can bypass allowlist validation by embedding shell expansion tokens in heredoc bodies to execute unapproved commands at runtime. | ||||
| CVE-2026-44114 | 1 Openclaw | 1 Openclaw | 2026-05-06 | 7.8 High |
| OpenClaw before 2026.4.20 fails to properly reserve the OPENCLAW_ runtime-control environment namespace in workspace dotenv files, allowing attackers to override critical runtime variables. Malicious workspaces can set variables like OPENCLAW_GIT_DIR to manipulate trusted OpenClaw runtime behavior during source-update or installer flows. | ||||
| CVE-2026-44113 | 1 Openclaw | 1 Openclaw | 2026-05-06 | 5.3 Medium |
| OpenClaw before 2026.4.22 contains a time-of-check/time-of-use race condition in the OpenShell filesystem bridge that allows attackers to read files outside the intended mount root. Attackers can exploit symlink swaps during filesystem operations to bypass sandbox restrictions and access unauthorized file contents. | ||||