| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A weakness has been identified in ChatGPTNextWeb NextChat up to 2.16.1. This affects the function storeUrl of the file app/api/artifacts/route.ts of the component Artifacts Endpoint. This manipulation of the argument ID causes server-side request forgery. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| OpenClaw before 2026.3.31 contains a sender allowlist bypass vulnerability in MS Teams thread history fetched via Graph API. Attackers can retrieve thread messages that should be filtered by sender allowlists, bypassing message filtering restrictions. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssg-prueth: fix use-after-free of CPPI descriptor in RX path
cppi5_hdesc_get_psdata() returns a pointer into the CPPI descriptor.
In both emac_rx_packet() and emac_rx_packet_zc(), the descriptor is
freed via k3_cppi_desc_pool_free() before the psdata pointer is used
by emac_rx_timestamp(), which dereferences psdata[0] and psdata[1].
This constitutes a use-after-free on every received packet that goes
through the timestamp path.
Defer the descriptor free until after all accesses through the psdata
pointer are complete. For emac_rx_packet(), move the free into the
requeue label so both early-exit and success paths free the descriptor
after all accesses are done. For emac_rx_packet_zc(), move the free to
the end of the loop body after emac_dispatch_skb_zc() (which calls
emac_rx_timestamp()) has returned. |
| A flaw has been found in SourceCodester Pizzafy Ecommerce System 1.0. This affects an unknown function of the file /view_prod.php. This manipulation of the argument ID causes sql injection. The attack is possible to be carried out remotely. The exploit has been published and may be used. |
| OpenClaw before 2026.3.28 contains a privilege escalation vulnerability in chat.send that allows write-scoped gateway callers to trigger admin-only session reset operations. Attackers can rotate target sessions, archive prior transcript state, and force new session IDs without requiring admin scope by exploiting improper authorization checks in the chat.send path. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/entry: Scrub r12 register on kernel entry
Before commit f33f2d4c7c80 ("s390/bp: remove TIF_ISOLATE_BP"),
all entry handlers loaded r12 with the current task pointer
(lg %r12,__LC_CURRENT) for use by the BPENTER/BPEXIT macros. That
commit removed TIF_ISOLATE_BP, dropping both the branch prediction
macros and the r12 load, but did not add r12 to the register clearing
sequence.
Add the missing xgr %r12,%r12 to make the register scrub consistent
across all entry points. |
| Vim is an open source, command line text editor. Prior to 9.2.0357, A command injection vulnerability exists in Vim's tag file processing. When resolving a tag, the filename field from the tags file is passed through wildcard expansion to resolve environment variables and wildcards. If the filename field contains backtick syntax (e.g., `command`), Vim executes the embedded command via the system shell with the full privileges of the running user. |
| KDE Dolphin before 25.12.3 allows applications in a Flatpak (or with AppArmor confinement) to open folders outside of the application sandbox without additional scrutiny. Dolphin's implementation of the FileManager1 protocol allows the path given to be any type of file, including scripts or executables. (By default, Dolphin will then prompt the user to determine if they want to launch a script or executable; however, the intended behavior is to block the attempted action, not present a consent prompt.) |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/fdinfo: fix OOB read in SQE_MIXED wrap check
__io_uring_show_fdinfo() iterates over pending SQEs and, for 128-byte
SQEs on an IORING_SETUP_SQE_MIXED ring, needs to detect when the second
half of the SQE would be past the end of the sq_sqes array. The current
check tests (++sq_head & sq_mask) == 0, but sq_head is only incremented
when a 128-byte SQE is encountered, not on every iteration. The actual
array index is sq_idx = (i + sq_head) & sq_mask, which can be sq_mask
(the last slot) while the wrap check passes.
Fix by checking sq_idx directly. Keep the sq_head increment so the loop
still skips the second half of the 128-byte SQE on the next iteration. |
| Technitium DNS Server before 15.0 allows DNS traffic amplification via cyclic name server delegation. |
| A reflected cross-site scripting (XSS) vulnerability exists in diskover-community <= 2.3.5 in public/view.php via the doctype parameter |
| A reflected cross-site scripting (XSS) vulnerability exists in diskover-community <= 2.3.5 in public/selectindices.php via the namecontains parameter |
| A handling issue in the RTSP service of the Mercury MIPC252W 1.0.5 Build 230306 Rel.79931n allows an authenticated attacker to trigger session termination by repeatedly sending SETUP requests for the same media track within a single RTSP session. This causes the server to reset the RTSP connection, leading to a denial-of-service condition. |
| P4 Server versions prior to 2026.1 are configured with insecure default settings that, when exposed to untrusted networks, allow unauthenticated attackers to create arbitrary user accounts, enumerate existing users, authenticate to accounts with no password set, and access depot contents via the built-in 'remote' user. These default settings, taken together, can lead to unauthorized access to source code repositories and other managed assets. The 2026.1 release, expected in May 2026, enforces secure-by-default configurations on upgrade and new installations |
| Missing Authorization vulnerability in Saleswonder Team: Tobias 5 Stars Rating Funnel 5-stars-rating-funnel.This issue affects 5 Stars Rating Funnel: from n/a through <= 1.2.67. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in cimatti Contact Forms by Cimatti contact-forms.This issue affects Contact Forms by Cimatti: from n/a through <= 1.8.0. |
| The Fan Control application V251 contains an improper privilege handling vulnerability in its Open File Dialog. The dialog processes user-supplied paths with elevated permissions, which can be exploited by a local attacker to perform actions with administrator-level privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-fsl-lpspi: fix teardown order issue (UAF)
There is a teardown order issue in the driver. The SPI controller is
registered using devm_spi_register_controller(), which delays
unregistration of the SPI controller until after the fsl_lpspi_remove()
function returns.
As the fsl_lpspi_remove() function synchronously tears down the DMA
channels, a running SPI transfer triggers the following NULL pointer
dereference due to use after free:
| fsl_lpspi 42550000.spi: I/O Error in DMA RX
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[...]
| Call trace:
| fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi]
| fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi]
| spi_transfer_one_message+0x49c/0x7c8
| __spi_pump_transfer_message+0x120/0x420
| __spi_sync+0x2c4/0x520
| spi_sync+0x34/0x60
| spidev_message+0x20c/0x378 [spidev]
| spidev_ioctl+0x398/0x750 [spidev]
[...]
Switch from devm_spi_register_controller() to spi_register_controller() in
fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in
fsl_lpspi_remove(). |
| In MIT Kerberos 5 (aka krb5) before 1.22.3, there is an integer underflow and resultant out-of-bounds read if an application calls gss_accept_sec_context() on a system with a NegoEx mechanism registered in /etc/gss/mech. An unauthenticated remote attacker can trigger this, possibly causing the process to terminate in parse_message. |
| In KDE KCoreAddons before 6.25, KShell::quoteArgs is intended to safely quote arguments so that they can be passed to a shell command. This parsing does not adequately handle metacharacters, leading to an escape from the shell. All applications relying on this method in a security-critical path to handle user input are affected and could be exploited. In particular, because sendInput() sends a string to a terminal, a control character such as \x01 can be used during injection. |
