| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6/addrconf: fix a potential refcount underflow for idev
Now in addrconf_mod_rs_timer(), reference idev depends on whether
rs_timer is not pending. Then modify rs_timer timeout.
There is a time gap in [1], during which if the pending rs_timer
becomes not pending. It will miss to hold idev, but the rs_timer
is activated. Thus rs_timer callback function addrconf_rs_timer()
will be executed and put idev later without holding idev. A refcount
underflow issue for idev can be caused by this.
if (!timer_pending(&idev->rs_timer))
in6_dev_hold(idev);
<--------------[1]
mod_timer(&idev->rs_timer, jiffies + when);
To fix the issue, hold idev if mod_timer() return 0. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: Fix memory leaks in error path
The memory allocated by vxlan_vnigroup_init() is not freed in the error
path, leading to memory leaks [1]. Fix by calling
vxlan_vnigroup_uninit() in the error path.
The leaks can be reproduced by annotating gro_cells_init() with
ALLOW_ERROR_INJECTION() and then running:
# echo "100" > /sys/kernel/debug/fail_function/probability
# echo "1" > /sys/kernel/debug/fail_function/times
# echo "gro_cells_init" > /sys/kernel/debug/fail_function/inject
# printf %#x -12 > /sys/kernel/debug/fail_function/gro_cells_init/retval
# ip link add name vxlan0 type vxlan dstport 4789 external vnifilter
RTNETLINK answers: Cannot allocate memory
[1]
unreferenced object 0xffff88810db84a00 (size 512):
comm "ip", pid 330, jiffies 4295010045 (age 66.016s)
hex dump (first 32 bytes):
f8 d5 76 0e 81 88 ff ff 01 00 00 00 00 00 00 02 ..v.............
03 00 04 00 48 00 00 00 00 00 00 01 04 00 01 00 ....H...........
backtrace:
[<ffffffff81a3097a>] kmalloc_trace+0x2a/0x60
[<ffffffff82f049fc>] vxlan_vnigroup_init+0x4c/0x160
[<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280
[<ffffffff836858ca>] register_netdevice+0x57a/0x16d0
[<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50
[<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130
[<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0
[<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0
[<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40
[<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440
[<ffffffff839066af>] netlink_unicast+0x53f/0x810
[<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70
[<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90
[<ffffffff835cd6da>] ___sys_sendmsg+0x13a/0x1e0
[<ffffffff835cd94c>] __sys_sendmsg+0x11c/0x1f0
[<ffffffff8424da78>] do_syscall_64+0x38/0x80
unreferenced object 0xffff88810e76d5f8 (size 192):
comm "ip", pid 330, jiffies 4295010045 (age 66.016s)
hex dump (first 32 bytes):
04 00 00 00 00 00 00 00 db e1 4f e7 00 00 00 00 ..........O.....
08 d6 76 0e 81 88 ff ff 08 d6 76 0e 81 88 ff ff ..v.......v.....
backtrace:
[<ffffffff81a3162e>] __kmalloc_node+0x4e/0x90
[<ffffffff81a0e166>] kvmalloc_node+0xa6/0x1f0
[<ffffffff8276e1a3>] bucket_table_alloc.isra.0+0x83/0x460
[<ffffffff8276f18b>] rhashtable_init+0x43b/0x7c0
[<ffffffff82f04a1c>] vxlan_vnigroup_init+0x6c/0x160
[<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280
[<ffffffff836858ca>] register_netdevice+0x57a/0x16d0
[<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50
[<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130
[<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0
[<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0
[<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40
[<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440
[<ffffffff839066af>] netlink_unicast+0x53f/0x810
[<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70
[<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90 |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: Fix nexthop hash size
The nexthop code expects a 31 bit hash, such as what is returned by
fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash
returned by skb_get_hash() can lead to problems related to the fact that
'int hash' is a negative number when the MSB is set.
In the case of hash threshold nexthop groups, nexthop_select_path_hthr()
will disproportionately select the first nexthop group entry. In the case
of resilient nexthop groups, nexthop_select_path_res() may do an out of
bounds access in nh_buckets[], for example:
hash = -912054133
num_nh_buckets = 2
bucket_index = 65535
which leads to the following panic:
BUG: unable to handle page fault for address: ffffc900025910c8
PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0
Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI
CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:nexthop_select_path+0x197/0xbf0
Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85
RSP: 0018:ffff88810c36f260 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8
RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219
R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0
R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900
FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x1ee/0x5c0
? __pfx_is_prefetch.constprop.0+0x10/0x10
? __pfx_page_fault_oops+0x10/0x10
? search_bpf_extables+0xfe/0x1c0
? fixup_exception+0x3b/0x470
? exc_page_fault+0xf6/0x110
? asm_exc_page_fault+0x26/0x30
? nexthop_select_path+0x197/0xbf0
? nexthop_select_path+0x197/0xbf0
? lock_is_held_type+0xe7/0x140
vxlan_xmit+0x5b2/0x2340
? __lock_acquire+0x92b/0x3370
? __pfx_vxlan_xmit+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
? __pfx_register_lock_class+0x10/0x10
? skb_network_protocol+0xce/0x2d0
? dev_hard_start_xmit+0xca/0x350
? __pfx_vxlan_xmit+0x10/0x10
dev_hard_start_xmit+0xca/0x350
__dev_queue_xmit+0x513/0x1e20
? __pfx___dev_queue_xmit+0x10/0x10
? __pfx_lock_release+0x10/0x10
? mark_held_locks+0x44/0x90
? skb_push+0x4c/0x80
? eth_header+0x81/0xe0
? __pfx_eth_header+0x10/0x10
? neigh_resolve_output+0x215/0x310
? ip6_finish_output2+0x2ba/0xc90
ip6_finish_output2+0x2ba/0xc90
? lock_release+0x236/0x3e0
? ip6_mtu+0xbb/0x240
? __pfx_ip6_finish_output2+0x10/0x10
? find_held_lock+0x83/0xa0
? lock_is_held_type+0xe7/0x140
ip6_finish_output+0x1ee/0x780
ip6_output+0x138/0x460
? __pfx_ip6_output+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
? __pfx_ip6_finish_output+0x10/0x10
NF_HOOK.constprop.0+0xc0/0x420
? __pfx_NF_HOOK.constprop.0+0x10/0x10
? ndisc_send_skb+0x2c0/0x960
? __pfx_lock_release+0x10/0x10
? __local_bh_enable_ip+0x93/0x110
? lock_is_held_type+0xe7/0x140
ndisc_send_skb+0x4be/0x960
? __pfx_ndisc_send_skb+0x10/0x10
? mark_held_locks+0x65/0x90
? find_held_lock+0x83/0xa0
ndisc_send_ns+0xb0/0x110
? __pfx_ndisc_send_ns+0x10/0x10
addrconf_dad_work+0x631/0x8e0
? lock_acquire+0x180/0x3f0
? __pfx_addrconf_dad_work+0x10/0x10
? mark_held_locks+0x24/0x90
process_one_work+0x582/0x9c0
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? mark_held_locks+0x24/0x90
worker_thread+0x93/0x630
? __kthread_parkme+0xdc/0x100
? __pfx_worker_thread+0x10/0x10
kthread+0x1a5/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x60
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini
The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v10_0_hw_fini, which also leads to the call
trace.
[ 82.340264] Call Trace:
[ 82.340265] <TASK>
[ 82.340269] gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu]
[ 82.340447] gmc_v10_0_suspend+0xe/0x20 [amdgpu]
[ 82.340623] amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu]
[ 82.340789] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 82.340955] amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu]
[ 82.341122] amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu]
[ 82.341359] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 82.341529] process_one_work+0x21d/0x3f0
[ 82.341535] worker_thread+0x1fa/0x3c0
[ 82.341538] ? process_one_work+0x3f0/0x3f0
[ 82.341540] kthread+0xff/0x130
[ 82.341544] ? kthread_complete_and_exit+0x20/0x20
[ 82.341547] ret_from_fork+0x22/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add length check in indx_get_root
This adds a length check to guarantee the retrieved index root is legit.
[ 162.459513] BUG: KASAN: use-after-free in hdr_find_e.isra.0+0x10c/0x320
[ 162.460176] Read of size 2 at addr ffff8880037bca99 by task mount/243
[ 162.460851]
[ 162.461252] CPU: 0 PID: 243 Comm: mount Not tainted 6.0.0-rc7 #42
[ 162.461744] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 162.462609] Call Trace:
[ 162.462954] <TASK>
[ 162.463276] dump_stack_lvl+0x49/0x63
[ 162.463822] print_report.cold+0xf5/0x689
[ 162.464608] ? unwind_get_return_address+0x3a/0x60
[ 162.465766] ? hdr_find_e.isra.0+0x10c/0x320
[ 162.466975] kasan_report+0xa7/0x130
[ 162.467506] ? _raw_spin_lock_irq+0xc0/0xf0
[ 162.467998] ? hdr_find_e.isra.0+0x10c/0x320
[ 162.468536] __asan_load2+0x68/0x90
[ 162.468923] hdr_find_e.isra.0+0x10c/0x320
[ 162.469282] ? cmp_uints+0xe0/0xe0
[ 162.469557] ? cmp_sdh+0x90/0x90
[ 162.469864] ? ni_find_attr+0x214/0x300
[ 162.470217] ? ni_load_mi+0x80/0x80
[ 162.470479] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 162.470931] ? ntfs_bread_run+0x190/0x190
[ 162.471307] ? indx_get_root+0xe4/0x190
[ 162.471556] ? indx_get_root+0x140/0x190
[ 162.471833] ? indx_init+0x1e0/0x1e0
[ 162.472069] ? fnd_clear+0x115/0x140
[ 162.472363] ? _raw_spin_lock_irqsave+0x100/0x100
[ 162.472731] indx_find+0x184/0x470
[ 162.473461] ? sysvec_apic_timer_interrupt+0x57/0xc0
[ 162.474429] ? indx_find_buffer+0x2d0/0x2d0
[ 162.474704] ? do_syscall_64+0x3b/0x90
[ 162.474962] dir_search_u+0x196/0x2f0
[ 162.475381] ? ntfs_nls_to_utf16+0x450/0x450
[ 162.475661] ? ntfs_security_init+0x3d6/0x440
[ 162.475906] ? is_sd_valid+0x180/0x180
[ 162.476191] ntfs_extend_init+0x13f/0x2c0
[ 162.476496] ? ntfs_fix_post_read+0x130/0x130
[ 162.476861] ? iput.part.0+0x286/0x320
[ 162.477325] ntfs_fill_super+0x11e0/0x1b50
[ 162.477709] ? put_ntfs+0x1d0/0x1d0
[ 162.477970] ? vsprintf+0x20/0x20
[ 162.478258] ? set_blocksize+0x95/0x150
[ 162.478538] get_tree_bdev+0x232/0x370
[ 162.478789] ? put_ntfs+0x1d0/0x1d0
[ 162.479038] ntfs_fs_get_tree+0x15/0x20
[ 162.479374] vfs_get_tree+0x4c/0x130
[ 162.479729] path_mount+0x654/0xfe0
[ 162.480124] ? putname+0x80/0xa0
[ 162.480484] ? finish_automount+0x2e0/0x2e0
[ 162.480894] ? putname+0x80/0xa0
[ 162.481467] ? kmem_cache_free+0x1c4/0x440
[ 162.482280] ? putname+0x80/0xa0
[ 162.482714] do_mount+0xd6/0xf0
[ 162.483264] ? path_mount+0xfe0/0xfe0
[ 162.484782] ? __kasan_check_write+0x14/0x20
[ 162.485593] __x64_sys_mount+0xca/0x110
[ 162.486024] do_syscall_64+0x3b/0x90
[ 162.486543] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 162.487141] RIP: 0033:0x7f9d374e948a
[ 162.488324] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 162.489728] RSP: 002b:00007ffe30e73d18 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
[ 162.490971] RAX: ffffffffffffffda RBX: 0000561cdb43a060 RCX: 00007f9d374e948a
[ 162.491669] RDX: 0000561cdb43a260 RSI: 0000561cdb43a2e0 RDI: 0000561cdb442af0
[ 162.492050] RBP: 0000000000000000 R08: 0000561cdb43a280 R09: 0000000000000020
[ 162.492459] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000561cdb442af0
[ 162.493183] R13: 0000561cdb43a260 R14: 0000000000000000 R15: 00000000ffffffff
[ 162.493644] </TASK>
[ 162.493908]
[ 162.494214] The buggy address belongs to the physical page:
[ 162.494761] page:000000003e38a3d5 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x37bc
[ 162.496064] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
[ 162.497278] raw: 000fffffc0000000 ffffea00000df1c8 ffffea00000df008 0000000000000000
[ 162.498928] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 162.500542] page dumped becau
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: minimal: fix potential memory leak in mlxsw_m_linecards_init
The line cards array is not freed in the error path of
mlxsw_m_linecards_init(), which can lead to a memory leak. Fix by
freeing the array in the error path, thereby making the error path
identical to mlxsw_m_linecards_fini(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm: nv04: Fix out of bounds access
When Output Resource (dcb->or) value is assigned in
fabricate_dcb_output(), there may be out of bounds access to
dac_users array in case dcb->or is zero because ffs(dcb->or) is
used as index there.
The 'or' argument of fabricate_dcb_output() must be interpreted as a
number of bit to set, not value.
Utilize macros from 'enum nouveau_or' in calls instead of hardcoding.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix use-after-free in do_zone_finish()
Shinichiro reported the following use-after-free triggered by the device
replace operation in fstests btrfs/070.
BTRFS info (device nullb1): scrub: finished on devid 1 with status: 0
==================================================================
BUG: KASAN: slab-use-after-free in do_zone_finish+0x91a/0xb90 [btrfs]
Read of size 8 at addr ffff8881543c8060 by task btrfs-cleaner/3494007
CPU: 0 PID: 3494007 Comm: btrfs-cleaner Tainted: G W 6.8.0-rc5-kts #1
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x90
print_report+0xcf/0x670
? __virt_addr_valid+0x200/0x3e0
kasan_report+0xd8/0x110
? do_zone_finish+0x91a/0xb90 [btrfs]
? do_zone_finish+0x91a/0xb90 [btrfs]
do_zone_finish+0x91a/0xb90 [btrfs]
btrfs_delete_unused_bgs+0x5e1/0x1750 [btrfs]
? __pfx_btrfs_delete_unused_bgs+0x10/0x10 [btrfs]
? btrfs_put_root+0x2d/0x220 [btrfs]
? btrfs_clean_one_deleted_snapshot+0x299/0x430 [btrfs]
cleaner_kthread+0x21e/0x380 [btrfs]
? __pfx_cleaner_kthread+0x10/0x10 [btrfs]
kthread+0x2e3/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 3493983:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
btrfs_alloc_device+0xb3/0x4e0 [btrfs]
device_list_add.constprop.0+0x993/0x1630 [btrfs]
btrfs_scan_one_device+0x219/0x3d0 [btrfs]
btrfs_control_ioctl+0x26e/0x310 [btrfs]
__x64_sys_ioctl+0x134/0x1b0
do_syscall_64+0x99/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Freed by task 3494056:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3f/0x60
poison_slab_object+0x102/0x170
__kasan_slab_free+0x32/0x70
kfree+0x11b/0x320
btrfs_rm_dev_replace_free_srcdev+0xca/0x280 [btrfs]
btrfs_dev_replace_finishing+0xd7e/0x14f0 [btrfs]
btrfs_dev_replace_by_ioctl+0x1286/0x25a0 [btrfs]
btrfs_ioctl+0xb27/0x57d0 [btrfs]
__x64_sys_ioctl+0x134/0x1b0
do_syscall_64+0x99/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
The buggy address belongs to the object at ffff8881543c8000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 96 bytes inside of
freed 1024-byte region [ffff8881543c8000, ffff8881543c8400)
The buggy address belongs to the physical page:
page:00000000fe2c1285 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1543c8
head:00000000fe2c1285 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x17ffffc0000840(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 0017ffffc0000840 ffff888100042dc0 ffffea0019e8f200 dead000000000002
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881543c7f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8881543c7f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8881543c8000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881543c8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881543c8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
This UAF happens because we're accessing stale zone information of a
already removed btrfs_device in do_zone_finish().
The sequence of events is as follows:
btrfs_dev_replace_start
btrfs_scrub_dev
btrfs_dev_replace_finishing
btrfs_dev_replace_update_device_in_mapping_tree <-- devices replaced
btrfs_rm_dev_replace_free_srcdev
btrfs_free_device <-- device freed
cleaner_kthread
btrfs_delete_unused_bgs
btrfs_zone_finish
do_zone_finish <-- refers the freed device
The reason for this is that we're using a
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
vfs: Don't leak disconnected dentries on umount
When user calls open_by_handle_at() on some inode that is not cached, we
will create disconnected dentry for it. If such dentry is a directory,
exportfs_decode_fh_raw() will then try to connect this dentry to the
dentry tree through reconnect_path(). It may happen for various reasons
(such as corrupted fs or race with rename) that the call to
lookup_one_unlocked() in reconnect_one() will fail to find the dentry we
are trying to reconnect and instead create a new dentry under the
parent. Now this dentry will not be marked as disconnected although the
parent still may well be disconnected (at least in case this
inconsistency happened because the fs is corrupted and .. doesn't point
to the real parent directory). This creates inconsistency in
disconnected flags but AFAICS it was mostly harmless. At least until
commit f1ee616214cb ("VFS: don't keep disconnected dentries on d_anon")
which removed adding of most disconnected dentries to sb->s_anon list.
Thus after this commit cleanup of disconnected dentries implicitely
relies on the fact that dput() will immediately reclaim such dentries.
However when some leaf dentry isn't marked as disconnected, as in the
scenario described above, the reclaim doesn't happen and the dentries
are "leaked". Memory reclaim can eventually reclaim them but otherwise
they stay in memory and if umount comes first, we hit infamous "Busy
inodes after unmount" bug. Make sure all dentries created under a
disconnected parent are marked as disconnected as well. |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbevf: fix mailbox API compatibility by negotiating supported features
There was backward compatibility in the terms of mailbox API. Various
drivers from various OSes supporting 10G adapters from Intel portfolio
could easily negotiate mailbox API.
This convention has been broken since introducing API 1.4.
Commit 0062e7cc955e ("ixgbevf: add VF IPsec offload code") added support
for IPSec which is specific only for the kernel ixgbe driver. None of the
rest of the Intel 10G PF/VF drivers supports it. And actually lack of
support was not included in the IPSec implementation - there were no such
code paths. No possibility to negotiate support for the feature was
introduced along with introduction of the feature itself.
Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication
between PF and VF") increasing API version to 1.5 did the same - it
introduced code supported specifically by the PF ESX driver. It altered API
version for the VF driver in the same time not touching the version
defined for the PF ixgbe driver. It led to additional discrepancies,
as the code provided within API 1.6 cannot be supported for Linux ixgbe
driver as it causes crashes.
The issue was noticed some time ago and mitigated by Jake within the commit
d0725312adf5 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5").
As a result we have regression for IPsec support and after increasing API
to version 1.6 ixgbevf driver stopped to support ESX MBX.
To fix this mess add new mailbox op asking PF driver about supported
features. Basing on a response determine whether to set support for IPSec
and ESX-specific enhanced mailbox.
New mailbox op, for compatibility purposes, must be added within new API
revision, as API version of OOT PF & VF drivers is already increased to
1.6 and doesn't incorporate features negotiate op.
Features negotiation mechanism gives possibility to be extended with new
features when needed in the future. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Prevent access to vCPU events before init
Another day, another syzkaller bug. KVM erroneously allows userspace to
pend vCPU events for a vCPU that hasn't been initialized yet, leading to
KVM interpreting a bunch of uninitialized garbage for routing /
injecting the exception.
In one case the injection code and the hyp disagree on whether the vCPU
has a 32bit EL1 and put the vCPU into an illegal mode for AArch64,
tripping the BUG() in exception_target_el() during the next injection:
kernel BUG at arch/arm64/kvm/inject_fault.c:40!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 3 UID: 0 PID: 318 Comm: repro Not tainted 6.17.0-rc4-00104-g10fd0285305d #6 PREEMPT
Hardware name: linux,dummy-virt (DT)
pstate: 21402009 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : exception_target_el+0x88/0x8c
lr : pend_serror_exception+0x18/0x13c
sp : ffff800082f03a10
x29: ffff800082f03a10 x28: ffff0000cb132280 x27: 0000000000000000
x26: 0000000000000000 x25: ffff0000c2a99c20 x24: 0000000000000000
x23: 0000000000008000 x22: 0000000000000002 x21: 0000000000000004
x20: 0000000000008000 x19: ffff0000c2a99c20 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 00000000200000c0
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff800082f03af8 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff800080f621f0 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 000000000040009b x1 : 0000000000000003 x0 : ffff0000c2a99c20
Call trace:
exception_target_el+0x88/0x8c (P)
kvm_inject_serror_esr+0x40/0x3b4
__kvm_arm_vcpu_set_events+0xf0/0x100
kvm_arch_vcpu_ioctl+0x180/0x9d4
kvm_vcpu_ioctl+0x60c/0x9f4
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xf0
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: f946bc01 b4fffe61 9101e020 17fffff2 (d4210000)
Reject the ioctls outright as no sane VMM would call these before
KVM_ARM_VCPU_INIT anyway. Even if it did the exception would've been
thrown away by the eventual reset of the vCPU's state. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST
At the end of btrfs_load_block_group_zone_info() the first thing we do
is to ensure that if the mapping type is not a SINGLE one and there is
no RAID stripe tree, then we return early with an error.
Doing that, though, prevents the code from running the last calls from
this function which are about freeing memory allocated during its
run. Hence, in this case, instead of returning early, we set the ret
value and fall through the rest of the cleanup code. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not assert we found block group item when creating free space tree
Currently, when building a free space tree at populate_free_space_tree(),
if we are not using the block group tree feature, we always expect to find
block group items (either extent items or a block group item with key type
BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with
btrfs_search_slot_for_read(), so we assert that we found an item. However
this expectation is wrong since we can have a new block group created in
the current transaction which is still empty and for which we still have
not added the block group's item to the extent tree, in which case we do
not have any items in the extent tree associated to the block group.
The insertion of a new block group's block group item in the extent tree
happens at btrfs_create_pending_block_groups() when it calls the helper
insert_block_group_item(). This typically is done when a transaction
handle is released, committed or when running delayed refs (either as
part of a transaction commit or when serving tickets for space reservation
if we are low on free space).
So remove the assertion at populate_free_space_tree() even when the block
group tree feature is not enabled and update the comment to mention this
case.
Syzbot reported this with the following stack trace:
BTRFS info (device loop3 state M): rebuilding free space tree
assertion failed: ret == 0 :: 0, in fs/btrfs/free-space-tree.c:1115
------------[ cut here ]------------
kernel BUG at fs/btrfs/free-space-tree.c:1115!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 6352 Comm: syz.3.25 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:populate_free_space_tree+0x700/0x710 fs/btrfs/free-space-tree.c:1115
Code: ff ff e8 d3 (...)
RSP: 0018:ffffc9000430f780 EFLAGS: 00010246
RAX: 0000000000000043 RBX: ffff88805b709630 RCX: fea61d0e2e79d000
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffffc9000430f8b0 R08: ffffc9000430f4a7 R09: 1ffff92000861e94
R10: dffffc0000000000 R11: fffff52000861e95 R12: 0000000000000001
R13: 1ffff92000861f00 R14: dffffc0000000000 R15: 0000000000000000
FS: 00007f424d9fe6c0(0000) GS:ffff888125afc000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd78ad212c0 CR3: 0000000076d68000 CR4: 00000000003526f0
Call Trace:
<TASK>
btrfs_rebuild_free_space_tree+0x1ba/0x6d0 fs/btrfs/free-space-tree.c:1364
btrfs_start_pre_rw_mount+0x128f/0x1bf0 fs/btrfs/disk-io.c:3062
btrfs_remount_rw fs/btrfs/super.c:1334 [inline]
btrfs_reconfigure+0xaed/0x2160 fs/btrfs/super.c:1559
reconfigure_super+0x227/0x890 fs/super.c:1076
do_remount fs/namespace.c:3279 [inline]
path_mount+0xd1a/0xfe0 fs/namespace.c:4027
do_mount fs/namespace.c:4048 [inline]
__do_sys_mount fs/namespace.c:4236 [inline]
__se_sys_mount+0x313/0x410 fs/namespace.c:4213
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f424e39066a
Code: d8 64 89 02 (...)
RSP: 002b:00007f424d9fde68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 00007f424d9fdef0 RCX: 00007f424e39066a
RDX: 0000200000000180 RSI: 0000200000000380 RDI: 0000000000000000
RBP: 0000200000000180 R08: 00007f424d9fdef0 R09: 0000000000000020
R10: 0000000000000020 R11: 0000000000000246 R12: 0000200000000380
R13: 00007f424d9fdeb0 R14: 0000000000000000 R15: 00002000000002c0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_get_acpi_mute_state()
Return value of a function acpi_evaluate_dsm() is dereferenced without
checking for NULL, but it is usually checked for this function.
acpi_evaluate_dsm() may return NULL, when acpi_evaluate_object() returns
acpi_status other than ACPI_SUCCESS, so add a check to prevent the crach.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: Fix missing pointer check in hda_component_manager_init function
The __component_match_add function may assign the 'matchptr' pointer
the value ERR_PTR(-ENOMEM), which will subsequently be dereferenced.
The call stack leading to the error looks like this:
hda_component_manager_init
|-> component_match_add
|-> component_match_add_release
|-> __component_match_add ( ... ,**matchptr, ... )
|-> *matchptr = ERR_PTR(-ENOMEM); // assign
|-> component_master_add_with_match( ... match)
|-> component_match_realloc(match, match->num); // dereference
Add IS_ERR() check to prevent the crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sched: Fix potential double free in drm_sched_job_add_resv_dependencies
When adding dependencies with drm_sched_job_add_dependency(), that
function consumes the fence reference both on success and failure, so in
the latter case the dma_fence_put() on the error path (xarray failed to
expand) is a double free.
Interestingly this bug appears to have been present ever since
commit ebd5f74255b9 ("drm/sched: Add dependency tracking"), since the code
back then looked like this:
drm_sched_job_add_implicit_dependencies():
...
for (i = 0; i < fence_count; i++) {
ret = drm_sched_job_add_dependency(job, fences[i]);
if (ret)
break;
}
for (; i < fence_count; i++)
dma_fence_put(fences[i]);
Which means for the failing 'i' the dma_fence_put was already a double
free. Possibly there were no users at that time, or the test cases were
insufficient to hit it.
The bug was then only noticed and fixed after
commit 9c2ba265352a ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2")
landed, with its fixup of
commit 4eaf02d6076c ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies").
At that point it was a slightly different flavour of a double free, which
commit 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder")
noticed and attempted to fix.
But it only moved the double free from happening inside the
drm_sched_job_add_dependency(), when releasing the reference not yet
obtained, to the caller, when releasing the reference already released by
the former in the failure case.
As such it is not easy to identify the right target for the fixes tag so
lets keep it simple and just continue the chain.
While fixing we also improve the comment and explain the reason for taking
the reference and not dropping it. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_rndis: Refactor bind path to use __free()
After an bind/unbind cycle, the rndis->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_acm: Refactor bind path to use __free()
After an bind/unbind cycle, the acm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Call trace:
usb_ep_free_request+0x2c/0xec
gs_free_req+0x30/0x44
acm_bind+0x1b8/0x1f4
usb_add_function+0xcc/0x1f0
configfs_composite_bind+0x468/0x588
gadget_bind_driver+0x104/0x270
really_probe+0x190/0x374
__driver_probe_device+0xa0/0x12c
driver_probe_device+0x3c/0x218
__device_attach_driver+0x14c/0x188
bus_for_each_drv+0x10c/0x168
__device_attach+0xfc/0x198
device_initial_probe+0x14/0x24
bus_probe_device+0x94/0x11c
device_add+0x268/0x48c
usb_add_gadget+0x198/0x28c
dwc3_gadget_init+0x700/0x858
__dwc3_set_mode+0x3cc/0x664
process_scheduled_works+0x1d8/0x488
worker_thread+0x244/0x334
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ecm: Refactor bind path to use __free()
After an bind/unbind cycle, the ecm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism. |
