| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, a signed integer overflow in QueryRGBBufferSizeInternal() in DPXColorConverter.cpp leads to a heap-based out-of-bounds write when processing crafted DPX image files. The function computes buffer sizes using 32-bit signed integer arithmetic with negative multipliers (e.g., pixels * -3 * bytes for kCbYCr descriptors and pixels * -4 * bytes for kABGR descriptors), where a negative result is used as an in-band signal that no separate buffer is needed. When the pixel count is sufficiently large, the multiplication overflows INT_MIN and wraps to a small positive value. The caller in dpxinput.cpp interprets this positive value as a required buffer size, allocates an undersized heap buffer via m_decodebuf.resize(), and then writes the full image data into it via fread, resulting in a heap buffer overflow. An attacker can exploit this by crafting a DPX file that triggers the overflow, causing a denial of service (crash) or potentially arbitrary code execution through heap corruption in any application that reads pixel data using OpenImageIO. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0. |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, jpeg2000input.cpp:395 computes buffer size as const int bufsize = w * h * ch * buffer_bpp using signed 32-bit arithmetic. When the product exceeds INT_MAX, the result wraps to 0 or a small value. m_buf.resize() allocates an undersized buffer, and subsequent pixel write loops cause heap overflow. Conditional on USE_OPENJPH build flag. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0. |
| In the Linux kernel, the following vulnerability has been resolved:
media: solo6x10: Check for out of bounds chip_id
Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type
(literal "1" is an "int") could end up being shifted beyond 32 bits,
so instrumentation was added (and due to the double is_tw286x() call
seen via inlining), Clang decides the second one must now be undefined
behavior and elides the rest of the function[1]. This is a known problem
with Clang (that is still being worked on), but we can avoid the entire
problem by actually checking the existing max chip ID, and now there is
no runtime instrumentation added at all since everything is known to be
within bounds.
Additionally use an unsigned value for the shift to remove the
instrumentation even without the explicit bounds checking.
[hverkuil: fix checkpatch warning for is_tw286x] |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, a signed 32-bit integer overflow in the pixel-loop index expression i * 3 inside ConvertCbYCrYToRGB() causes the function to compute a large negative pointer offset into the output buffer, producing an out-of-bounds write that crashes the process. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0. |
| libsixel is a SIXEL encoder/decoder implementation derived from kmiya's sixel. From to 1.8.7-r1, a signed integer overflow in the SIXEL parser's image-buffer doubling loop can lead to an out-of-bounds heap write in sixel_decode_raw_impl. context->pos_x grows by repeat_count on every sixel character with no upper bound check. Once pos_x approaches INT_MAX, the expression "pos_x + repeat_count" used to size the image buffer overflows signed int. Depending on how the overflow wraps, the resize check that should reject oversized buffers can be bypassed, after which a subsequent write computes a large attacker-influenced offset into image->data and writes past the allocation. Reachable from any caller that decodes attacker-supplied SIXEL data, including img2sixel. This vulnerability is fixed in 1.8.7-r2. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix potential overflow of shmem scatterlist length
When a scatterlists table of a GEM shmem object of size 4 GB or more is
populated with pages allocated from a folio, unsigned int .length
attribute of a scatterlist may get overflowed if total byte length of
pages allocated to that single scatterlist happens to reach or cross the
4GB limit. As a consequence, users of the object may suffer from hitting
unexpected, premature end of the object's backing pages.
[278.780187] ------------[ cut here ]------------
[278.780377] WARNING: CPU: 1 PID: 2326 at drivers/gpu/drm/i915/i915_mm.c:55 remap_sg+0x199/0x1d0 [i915]
...
[278.780654] CPU: 1 UID: 0 PID: 2326 Comm: gem_mmap_offset Tainted: G S U 6.17.0-rc1-CI_DRM_16981-ged823aaa0607+ #1 PREEMPT(voluntary)
[278.780656] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
[278.780658] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
[278.780659] RIP: 0010:remap_sg+0x199/0x1d0 [i915]
...
[278.780786] Call Trace:
[278.780787] <TASK>
[278.780788] ? __apply_to_page_range+0x3e6/0x910
[278.780795] ? __pfx_remap_sg+0x10/0x10 [i915]
[278.780906] apply_to_page_range+0x14/0x30
[278.780908] remap_io_sg+0x14d/0x260 [i915]
[278.781013] vm_fault_cpu+0xd2/0x330 [i915]
[278.781137] __do_fault+0x3a/0x1b0
[278.781140] do_fault+0x322/0x640
[278.781143] __handle_mm_fault+0x938/0xfd0
[278.781150] handle_mm_fault+0x12c/0x300
[278.781152] ? lock_mm_and_find_vma+0x4b/0x760
[278.781155] do_user_addr_fault+0x2d6/0x8e0
[278.781160] exc_page_fault+0x96/0x2c0
[278.781165] asm_exc_page_fault+0x27/0x30
...
That issue was apprehended by the author of a change that introduced it,
and potential risk even annotated with a comment, but then never addressed.
When adding folio pages to a scatterlist table, take care of byte length
of any single scatterlist not exceeding max_segment.
(cherry picked from commit 06249b4e691a75694c014a61708c007fb5755f60) |
| libyang is a YANG data modeling language library. Prior to SO 5.2.15, lyb_read_string() in src/parser_lyb.c contains an integer overflow that results in a heap buffer overflow when parsing a maliciously crafted LYB binary blob. An attacker who can supply LYB data to any libyang consumer (NETCONF server, sysrepo, etc.) can trigger a crash or potential heap corruption. This vulnerability is fixed in SO 5.2.15. |
| CAI Content Credentials versions 0.78.2, 0.7.0 and earlier are affected by an Integer Overflow or Wraparound vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction. |
| CAI Content Credentials versions 0.78.2, 0.7.0 and earlier are affected by an Integer Overflow or Wraparound vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction. |
| A compromised Trusted OS (TOS) driver could issue a malformed call that could potentially allow memory access outside the intended range resulting in loss of integrity. |
| Pillow is a Python imaging library. From version 10.3.0 to before version 12.2.0, processing a malicious PSD file could lead to memory corruption, potentially resulting in a crash or arbitrary code execution. This issue has been patched in version 12.2.0. |
| An integer overflow in network packet parsing code in PgBouncer before 1.25.2 bypasses a boundary check and can lead to a crash. An unauthenticated remote attacker can crash PgBouncer with a malformed SCRAM authentication packet. |
| An integer overflow vulnerability in the simdjson document-builder API allows incorrect buffer size calculations in "string_builder::escape_and_append()" when processing very large input strings on platforms with limited "size_t" width (e.g., 32-bit builds). The overflow can cause insufficient buffer allocation, leading to out-of-bounds memory reads in SIMD routines and potentially resulting in information disclosure, memory corruption, or malformed JSON output.
This vulnerability has been fixed in 4.6.4 release |
| Integer overflow or wraparound in Windows Storage Spaces Controller allows an authorized attacker to elevate privileges locally. |
| Integer overflow or wraparound in Windows Win32K - GRFX allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Win32K - GRFX allows an authorized attacker to elevate privileges locally. |
| Integer overflow or wraparound in Windows DWM Core Library allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: nlink overflow in jfs_rename
If nlink is maximal for a directory (-1) and inside that directory you
perform a rename for some child directory (not moving from the parent),
then the nlink of the first directory is first incremented and later
decremented. Normally this is fine, but when nlink = -1 this causes a
wrap around to 0, and then drop_nlink issues a warning.
After applying the patch syzbot no longer issues any warnings. I also
ran some basic fs tests to look for any regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut
Number of MW LUTs depends on NTB configuration and can be set to zero,
in such scenario rounddown_pow_of_two will cause undefined behaviour and
should not be performed.
This patch ensures that rounddown_pow_of_two is called on valid value. |
| barebox version prior to 2026.04.0 contains multiple memory-safety vulnerabilities in the EFI PE loader in efi/loader/pe.c where integer overflow in virtual image size computation using 32-bit arithmetic on section VirtualAddress and size values allows undersized heap allocation, and PE section loading logic fails to validate that PointerToRawData plus copied size remains within the PE file buffer. An attacker can supply a malicious EFI PE binary via TFTP, USB, SD card, or network boot to trigger heap buffer overflow or out-of-bounds read from heap memory, potentially achieving code execution in bootloader context. |
