| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Storage Defender 2.0.0 through 2.0.7 on-prem defender-sensor-cmd CLI
could allow a remote attacker to obtain sensitive information, caused by sending network requests over an insecure channel. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. |
| IBM Security Guardium Data Encryption (GDE) 3.0.0.2 stores sensitive information in URL parameters. This may lead to information disclosure if unauthorized parties have access to the URLs via server logs, referrer header or browser history. IBM X-Force ID: 171823. |
| A vulnerability has been identified in RUGGEDCOM i800 (All versions < V4.3.8), RUGGEDCOM i801 (All versions < V4.3.8), RUGGEDCOM i802 (All versions < V4.3.8), RUGGEDCOM i803 (All versions < V4.3.8), RUGGEDCOM M2100 (All versions < V4.3.8), RUGGEDCOM M2200 (All versions < V4.3.8), RUGGEDCOM M969 (All versions < V4.3.8), RUGGEDCOM RMC30 (All versions < V4.3.8), RUGGEDCOM RMC8388 V4.X (All versions < V4.3.8), RUGGEDCOM RMC8388 V5.X (All versions < V5.7.0), RUGGEDCOM RP110 (All versions < V4.3.8), RUGGEDCOM RS1600 (All versions < V4.3.8), RUGGEDCOM RS1600F (All versions < V4.3.8), RUGGEDCOM RS1600T (All versions < V4.3.8), RUGGEDCOM RS400 (All versions < V4.3.8), RUGGEDCOM RS401 (All versions < V4.3.8), RUGGEDCOM RS416 (All versions < V4.3.8), RUGGEDCOM RS416P (All versions < V4.3.8), RUGGEDCOM RS416Pv2 V4.X (All versions < V4.3.8), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.7.0), RUGGEDCOM RS416v2 V4.X (All versions < V4.3.8), RUGGEDCOM RS416v2 V5.X (All versions < V5.7.0), RUGGEDCOM RS8000 (All versions < V4.3.8), RUGGEDCOM RS8000A (All versions < V4.3.8), RUGGEDCOM RS8000H (All versions < V4.3.8), RUGGEDCOM RS8000T (All versions < V4.3.8), RUGGEDCOM RS900 (All versions < V4.3.8), RUGGEDCOM RS900 (32M) V4.X (All versions < V4.3.8), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.7.0), RUGGEDCOM RS900G (All versions < V4.3.8), RUGGEDCOM RS900G (32M) V4.X (All versions < V4.3.8), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.7.0), RUGGEDCOM RS900GP (All versions < V4.3.8), RUGGEDCOM RS900L (All versions < V4.3.8), RUGGEDCOM RS900M-GETS-C01 (All versions < V4.3.8), RUGGEDCOM RS900M-GETS-XX (All versions < V4.3.8), RUGGEDCOM RS900M-STND-C01 (All versions < V4.3.8), RUGGEDCOM RS900M-STND-XX (All versions < V4.3.8), RUGGEDCOM RS900W (All versions < V4.3.8), RUGGEDCOM RS910 (All versions < V4.3.8), RUGGEDCOM RS910L (All versions < V4.3.8), RUGGEDCOM RS910W (All versions < V4.3.8), RUGGEDCOM RS920L (All versions < V4.3.8), RUGGEDCOM RS920W (All versions < V4.3.8), RUGGEDCOM RS930L (All versions < V4.3.8), RUGGEDCOM RS930W (All versions < V4.3.8), RUGGEDCOM RS940G (All versions < V4.3.8), RUGGEDCOM RS969 (All versions < V4.3.8), RUGGEDCOM RSG2100 (All versions < V4.3.8), RUGGEDCOM RSG2100 (32M) V4.X (All versions < V4.3.8), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.7.0), RUGGEDCOM RSG2100P (All versions < V4.3.8), RUGGEDCOM RSG2100P (32M) V4.X (All versions < V4.3.8), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.7.0), RUGGEDCOM RSG2200 (All versions < V4.3.8), RUGGEDCOM RSG2288 V4.X (All versions < V4.3.8), RUGGEDCOM RSG2288 V5.X (All versions < V5.7.0), RUGGEDCOM RSG2300 V4.X (All versions < V4.3.8), RUGGEDCOM RSG2300 V5.X (All versions < V5.7.0), RUGGEDCOM RSG2300P V4.X (All versions < V4.3.8), RUGGEDCOM RSG2300P V5.X (All versions < V5.7.0), RUGGEDCOM RSG2488 V4.X (All versions < V4.3.8), RUGGEDCOM RSG2488 V5.X (All versions < V5.7.0), RUGGEDCOM RSG907R (All versions < V5.7.0), RUGGEDCOM RSG908C (All versions < V5.7.0), RUGGEDCOM RSG909R (All versions < V5.7.0), RUGGEDCOM RSG910C (All versions < V5.7.0), RUGGEDCOM RSG920P V4.X (All versions < V4.3.8), RUGGEDCOM RSG920P V5.X (All versions < V5.7.0), RUGGEDCOM RSL910 (All versions < V5.7.0), RUGGEDCOM RST2228 (All versions < V5.7.0), RUGGEDCOM RST2228P (All versions < V5.7.0), RUGGEDCOM RST916C (All versions < V5.7.0), RUGGEDCOM RST916P (All versions < V5.7.0). The SSH server on affected devices is configured to offer weak ciphers by default.
This could allow an unauthorized attacker in a man-in-the-middle position to read and modify any data passed over the connection between legitimate clients and the affected device. |
| A vulnerability in the administrative web-based GUI configuration manager of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to access sensitive configuration information. The attacker would require low privilege credentials on an affected device.
This vulnerability exists because of improper encryption of sensitive information stored within the GUI configuration manager. An attacker could exploit this vulnerability by logging into the GUI of Cisco FMC Software and navigating to certain sensitive configurations. A successful exploit could allow the attacker to view sensitive configuration parameters in clear text.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.[[Publication_URL{Layout()}]]This advisory is part of the October 2021 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see . |
| In the configuration file of racoon in the TRENDnet TEW-WLC100P 2.03b03, the first item of exchage_mode is set to aggressive. Aggressive mode in IKE Phase 1 exposes identity information in plaintext, is vulnerable to offline dictionary attacks, and lacks flexibility in negotiating security parameters. |
| git-annex had a bug in the S3 and Glacier remotes where if embedcreds=yes
was set, and the remote used encryption=pubkey or encryption=hybrid,
the embedded AWS credentials were stored in the git repository
in (effectively) plaintext, not encrypted as they were supposed to be. This issue affects git-annex: from 3.20121126 before 5.20140919. |
| An issue was discovered in Couchbase Sync Gateway before 3.2.6. In sgcollect_info_options.log and sync_gateway.log, there are cleartext passwords in redacted and unredacted output. |
| The firmware of the AZIOT 2MP Full HD Smart Wi-Fi CCTV Home Security Camera (version V1.00.02) contains an Incorrect Access Control vulnerability that allows local attackers to gain root shell access. Once accessed, the device exposes critical data including Wi-Fi credentials and ONVIF service credentials stored in plaintext, enabling further compromise of the network and connected systems. |
| A vulnerability in the administrative web-based GUI configuration manager of Cisco Firepower Management Center Software could allow an authenticated, remote attacker to access sensitive configuration information. The attacker would require low privilege credentials on an affected device.
This vulnerability is due to lack of proper encryption of sensitive information stored within the GUI configuration manager. An attacker could exploit this vulnerability by logging into the FMC GUI and navigating to certain sensitive configurations. A successful exploit could allow the attacker to view sensitive configuration parameters in clear text.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.[[Publication_URL{Layout()}]]This advisory is part of the October 2021 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see . |
| A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to obtain sensitive information from an affected device.
This vulnerability is due to a lack of proper data protection mechanisms for certain configuration settings. An attacker with Read-Only Administrator privileges could exploit this vulnerability by browsing to a page that contains sensitive data. A successful exploit could allow the attacker to view device credentials that are normally not visible to Read-Only Administrators. |
| Sandboxie is a sandbox-based isolation software for 32-bit and 64-bit Windows NT-based operating systems. In versions 1.16.1 and below, a critical security vulnerability exists in password handling mechanisms. During encrypted sandbox creation, user passwords are transmitted via shared memory, exposing them to potential interception. The vulnerability is particularly severe during password modification operations, where both old and new passwords are passed as plaintext command-line arguments to the Imbox process without any encryption or obfuscation. This implementation flaw allows any process within the user session, including unprivileged processes, to retrieve these sensitive credentials by reading the command-line arguments, thereby bypassing standard privilege requirements and creating a significant security risk. This is fixed in version 1.16.2. |
| A vulnerability, which was classified as problematic, has been found in Comodo Dragon up to 134.0.6998.179. Affected by this issue is some unknown functionality of the component IP DNS Leakage Detector. The manipulation leads to cleartext transmission of sensitive information. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Plain text credentials and session ID can be captured with a network sniffer. |
| All versions of ETIC Telecom Remote Access Server (RAS) prior to 4.5.0
expose clear text credentials in the web portal. An attacker can access
the ETIC RAS web portal and view the HTML code, which is configured to
be hidden, thus allowing a connection to the ETIC RAS ssh server, which
could enable an attacker to perform actions on the device. |
| Bitdefender Box, versions 1.3.11.490 through 1.3.11.505, uses the insecure HTTP protocol to download assets over the Internet to update and restart daemons and detection rules on the devices. Updates can be remotely triggered through the /set_temp_token API method. Then, an unauthenticated and network-adjacent attacker can use man-in-the-middle (MITM) techniques to return malicious responses. Restarted daemons that use malicious assets can then be exploited for remote code execution on the device. |
| IBM Cognos Analytics Mobile for Android 1.1.14 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. |
| In JetBrains TeamCity before 2025.07 password exposure was possible via command line in the "hg pull" command |
| In JetBrains TeamCity before 2025.07 user credentials were stored in plain text in memory snapshots |
| IBM QRadar SIEM 7.5 transmits sensitive or security-critical data in cleartext in a communication channel that could be obtained by an unauthorized actor using man in the middle techniques. |
| IBM Security Guardium 10.5, 10.6, 11.0, 11.1, 11.2, 11.3, and 11.4 stores user credentials in plain clear text which can be read by a local privileged user. IBM X-Force ID: 215587. |
