| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma4: replace BUG_ON with WARN_ON in fence emission
sdma_v4_0_ring_emit_fence() contains two BUG_ON(addr & 0x3) assertions
that verify fence writeback addresses are dword-aligned. These
assertions can be reached from unprivileged userspace via crafted
DRM_IOCTL_AMDGPU_CS submissions, causing a fatal kernel panic in a
scheduler worker thread.
Replace both BUG_ON() calls with WARN_ON() to log the condition without
crashing the kernel. A misaligned fence address at this point indicates
a driver bug, but crashing the kernel is never the correct response when
the assertion is reachable from userspace.
The CS IOCTL path is the correct place to filter invalid submissions;
the ring emission callback is too late to do anything about it.
(cherry picked from commit b90250bd933afd1ba94d86d6b13821997b22b18e) |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Set old handle to NULL before prime swap in change_handle
There was a potential race condition in change_handle. The ioctl
briefly had a single object with two idr entries; a concurrent
gem_close could delete the object and remove one of the handles
while leaving the other one dangling, which could subsequently
be dereferenced for a use-after-free.
To fix this, do the same dance that gem_close itself does.
(f6cd7daecff5 drm: Release driver references to handle before making it available again)
First idr_replace the old handle to NULL. Later, if the prime
operations are successful, actually close it.
create_tail required a similar dance to avoid a similar problem.
(bd46cece51a3 drm/gem: Fix race in drm_gem_handle_create_tail())
It idr_allocs the new handle with NULL, then swaps in the correct
object later to avoid races. We don't need to do that here, since
the only operations that could race are drm_prime, and
change_handle holds the prime lock for the entire duration.
v2: cleanups of error paths |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: fix use-after-free of fmt_src during MBPF check
During concurrency testing, multiple instances can run in parallel, and
each instance uses its own inst->lock while the core->lock protects the
list of active instances. The race happens because these locks cover
different scopes, inst->lock protects only the internals of a single
instance, while the Macro Blocks Per Frame (MBPF) checker walks the
core list under core->lock and reads fields like fmt_src->width and
fmt_src->height. At the same time, iris_close() may free fmt_src and
fmt_dst under inst->lock while the instance is still present in the core
list. This allows a situation where the MBPF checker, still iterating
through the core list, reaches an instance whose fmt_src was already
freed by another thread and ends up dereferencing a dangling pointer,
resulting in a use-after-free. This happens because the MBPF checker
assumes that any instance in the core list is fully valid, but the
freeing of fmt_src and fmt_dst without removing the instance from the
core list is not correct.
The correct ordering is to defer freeing fmt_src and fmt_dst until after
the instance has been removed from the core list and all teardown under
the core lock has completed, ensuring that no dangling pointers are ever
exposed during MBPF checks. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: appletb-kbd: run inactivity autodim from workqueues
The autodim code in hid-appletb-kbd takes backlight_device->ops_lock
via backlight_device_set_brightness() -> mutex_lock() from two
different atomic contexts:
* appletb_inactivity_timer() is a struct timer_list callback, so it
runs in softirq context. Every expiry triggers
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
Call Trace:
<IRQ>
__might_resched
__mutex_lock
backlight_device_set_brightness
appletb_inactivity_timer
call_timer_fn
run_timer_softirq
* reset_inactivity_timer() is called from appletb_kbd_hid_event() and
appletb_kbd_inp_event(). On real USB hardware these run in
softirq/IRQ context (URB completion and input-event dispatch).
When the Touch Bar has already been dimmed or turned off, the
reset path calls backlight_device_set_brightness() directly to
restore brightness, producing the same warning.
Both call sites hit the same mutex_lock()-from-atomic bug. Fix them
together by moving the blocking work onto the system workqueue:
* Convert the inactivity timer from struct timer_list to
struct delayed_work; the callback (appletb_inactivity_work) now
runs in process context where mutex_lock() is legal.
* Add a dedicated struct work_struct restore_brightness_work and have
reset_inactivity_timer() schedule it instead of calling
backlight_device_set_brightness() directly.
Cancel both works synchronously during driver tear-down alongside the
existing backlight reference drop.
The semantics are unchanged (same delays, same state transitions on
dim, turn-off and user activity); only the execution context of the
sleeping call changes. The timer field and callback are renamed to
match their new type; reset_inactivity_timer() keeps its name because
it is invoked from input event paths that read naturally as "reset
the inactivity timer". |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: Avoid OOB font access if console rotation fails
Clear the font buffer if the reallocation during console rotation fails
in fbcon_rotate_font(). The putcs implementations for the rotated buffer
will return early in this case. See [1] for an example.
Currently, fbcon_rotate_font() keeps the old buffer, which is too small
for the rotated font. Printing to the rotated console with a high-enough
character code will overflow the font buffer.
v2:
- fix typos in commit message |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/vmw_pvrdma: Fix double free on pvrdma_alloc_ucontext() error path
Sashiko points out that pvrdma_uar_free() is already called within
pvrdma_dealloc_ucontext(), so calling it before triggers a double free. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Prevent improper isolation of shared resources in Zen2's op cache
Make sure resources are not improperly shared in the op cache and
cause instruction corruption this way. |
| In the Linux kernel, the following vulnerability has been resolved:
exit: prevent preemption of oopsing TASK_DEAD task
When an already-exiting task oopses, make_task_dead() currently calls
do_task_dead() with preemption enabled. That is forbidden:
do_task_dead() calls __schedule(), which has a comment saying "WARNING:
must be called with preemption disabled!".
If an oopsing task is preempted in do_task_dead(), between becoming
TASK_DEAD and entering the scheduler explicitly, bad things happen:
finish_task_switch() assumes that once the scheduler has switched away
from a TASK_DEAD task, the task can never run again and its stack is no
longer needed; but that assumption apparently doesn't hold if the dead
task was preempted (the SM_PREEMPT case).
This means that the scheduler ends up repeatedly dropping references on
the dead task's stack, which can lead to use-after-free or double-free
of the entire task stack; in other words, two tasks can end up running
on the same stack, resulting in various kinds of memory corruption.
(This does not just affect "recursively oopsing" tasks; it is enough to
oops once during task exit, for example in a file_operations::release
handler) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: b43legacy: enforce bounds check on firmware key index in RX path
Same fix as b43: the firmware-controlled key index in b43legacy_rx()
can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is
non-enforcing in production builds, allowing an out-of-bounds read of
dev->key[].
Make the check enforcing by dropping the frame for invalid indices. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: oss: Fix data race at accessing runtime.oss.trigger
Currently the runtime.oss.trigger field may be accessed concurrently
without protection, which may lead to the data race. And, in this
case, it may lead to more severe problem because it's a bit field; as
writing the data, it may overwrite other bit fields as well, which
confuses the operation completely, as spotted by fuzzing.
Fix it by covering runtime.oss.trigger bit fled also with the existing
params_lock mutex in both snd_pcm_oss_get_trigger() and
snd_pcm_oss_poll(). |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix potential ADE in loongson_gpu_fixup_dma_hang()
The switch case in loongson_gpu_fixup_dma_hang() may not DC2 or DC3, and
readl(crtc_reg) will access with random address, because the "device" is
from "base+PCI_DEVICE_ID", "base" is from "pdev->devfn+1". This is wrong
when my platform inserts a discrete GPU:
lspci -tv
-[0000:00]-+-00.0 Loongson Technology LLC Hyper Transport Bridge Controller
...
+-06.0 Loongson Technology LLC LG100 GPU
+-06.2 Loongson Technology LLC Device 7a37
...
Add a default switch case to fix the panic as below:
Kernel ade access[#1]:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.136-loong64-desktop-hwe+ #4
pc 90000000017e5534 ra 90000000017e54c0 tp 90000001002f8000 sp 90000001002fb6c0
a0 80000efe00003100 a1 0000000000003100 a2 0000000000000000 a3 0000000000000002
a4 90000001002fb6b4 a5 900000087cdb58fd a6 90000000027af000 a7 0000000000000001
t0 00000000000085b9 t1 000000000000ffff t2 0000000000000000 t3 0000000000000000
t4 fffffffffffffffd t5 00000000fffb6d9c t6 0000000000083b00 t7 00000000000070c0
t8 900000087cdb4d94 u0 900000087cdb58fd s9 90000001002fb826 s0 90000000031c12c8
s1 7fffffffffffff00 s2 90000000031c12d0 s3 0000000000002710 s4 0000000000000000
s5 0000000000000000 s6 9000000100053000 s7 7fffffffffffff00 s8 90000000030d4000
ra: 90000000017e54c0 loongson_gpu_fixup_dma_hang+0x40/0x210
ERA: 90000000017e5534 loongson_gpu_fixup_dma_hang+0xb4/0x210
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 00480000 [ADEM] (IS= ECode=8 EsubCode=1)
BADV: 7fffffffffffff00
PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV)
Modules linked in:
Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____))
Stack : 0000000000000006 90000001002fb778 90000001002fb704 0000000000000007
0000000016a65700 90000000017e5690 000000000000ffff ffffffffffffffff
900000000209f7c0 9000000100053000 900000000209f7a8 9000000000eebc08
0000000000000000 0000000000000000 0000000000000006 90000001002fb778
90000001000530b8 90000000027af000 0000000000000000 9000000100054000
9000000100053000 9000000000ebb70c 9000000100004c00 9000000004000001
90000001002fb7e4 bae765461f31cb12 0000000000000000 0000000000000000
0000000000000006 90000000027af000 0000000000000030 90000000027af000
900000087cd6f800 9000000100053000 0000000000000000 9000000000ebc560
7a2500147cdaf720 bae765461f31cb12 0000000000000001 0000000000000030
...
Call Trace:
[<90000000017e5534>] loongson_gpu_fixup_dma_hang+0xb4/0x210
[<9000000000eebc08>] pci_fixup_device+0x108/0x280
[<9000000000ebb70c>] pci_setup_device+0x24c/0x690
[<9000000000ebc560>] pci_scan_single_device+0xe0/0x140
[<9000000000ebc684>] pci_scan_slot+0xc4/0x280
[<9000000000ebdd00>] pci_scan_child_bus_extend+0x60/0x3f0
[<9000000000f5bc94>] acpi_pci_root_create+0x2b4/0x420
[<90000000017e5e74>] pci_acpi_scan_root+0x2d4/0x440
[<9000000000f5b02c>] acpi_pci_root_add+0x21c/0x3a0
[<9000000000f4ee54>] acpi_bus_attach+0x1a4/0x3c0
[<90000000010e200c>] device_for_each_child+0x6c/0xe0
[<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70
[<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0
[<90000000010e200c>] device_for_each_child+0x6c/0xe0
[<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70
[<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0
[<9000000000f5211c>] acpi_bus_scan+0x6c/0x280
[<900000000189c028>] acpi_scan_init+0x194/0x310
[<900000000189bc6c>] acpi_init+0xcc/0x140
[<9000000000220cdc>] do_one_initcall+0x4c/0x310
[<90000000018618fc>] kernel_init_freeable+0x258/0x2d4
[<900000000184326c>] kernel_init+0x28/0x13c
[<9000000000222008>] ret_from_kernel_thread+0xc/0xa4 |
| In the Linux kernel, the following vulnerability has been resolved:
fanotify: fix false positive on permission events
fsnotify_get_mark_safe() may return false for a mark on an unrelated group,
which results in bypassing the permission check.
Fix by skipping over detached marks that are not in the current group. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Fix error unwind in mana_ib_create_qp_rss()
Sashiko points out that mana_ib_cfg_vport_steering() is leaked, the normal
destroy path cleans it up. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: validate WMT event SKB length before struct access
btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to
struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc
(9 bytes) without first checking that the SKB contains enough data.
A short firmware response causes out-of-bounds reads from SKB tailroom.
Use skb_pull_data() to validate and advance past the base WMT event
header. For the FUNC_CTRL case, pull the additional status field bytes
before accessing them. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fix race between ICReq handling and queue teardown
nvmet_tcp_handle_icreq() updates queue->state after sending an
Initialization Connection Response (ICResp), but it does so without
serializing against target-side queue teardown.
If an NVMe/TCP host sends an Initialization Connection Request
(ICReq) and immediately closes the connection, target-side teardown
may start in softirq context before io_work drains the already
buffered ICReq. In that case, nvmet_tcp_schedule_release_queue()
sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue
reference under state_lock.
If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can
still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the
DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and
allows a later socket state change to re-enter teardown and issue a
second kref_put() on an already released queue.
The ICResp send failure path has the same problem. If teardown has
already moved the queue to DISCONNECTING, a send error can still
overwrite the state with NVMET_TCP_Q_FAILED, again reopening the
window for a second teardown path to drop the queue reference.
Fix this by serializing both post-send state transitions with
state_lock and bailing out if teardown has already started.
Use -ESHUTDOWN as an internal sentinel for that bail-out path rather
than propagating it as a transport error like -ECONNRESET. Keep
nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before
honoring that sentinel so receive-side parsing stays quiesced until the
existing release path completes. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_typec: Init mutex in Thunderbolt registration
cros_typec_register_thunderbolt() missed initializing the `adata->lock`
mutex. This leads to a NULL dereference when the mutex is later
acquired (e.g. in cros_typec_altmode_work()).
Initialize the mutex in cros_typec_register_thunderbolt() to fix the
issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rtnetlink: zero ifla_vf_broadcast to avoid stack infoleak in rtnl_fill_vfinfo
rtnl_fill_vfinfo() declares struct ifla_vf_broadcast on the stack
without initialisation:
struct ifla_vf_broadcast vf_broadcast;
The struct contains a single fixed 32-byte field:
/* include/uapi/linux/if_link.h */
struct ifla_vf_broadcast {
__u8 broadcast[32];
};
The function then copies dev->broadcast into it using dev->addr_len
as the length:
memcpy(vf_broadcast.broadcast, dev->broadcast, dev->addr_len);
On Ethernet devices (the overwhelming majority of SR-IOV NICs)
dev->addr_len is 6, so only the first 6 bytes of broadcast[] are
written. The remaining 26 bytes retain whatever was previously on
the kernel stack. The full struct is then handed to userspace via:
nla_put(skb, IFLA_VF_BROADCAST,
sizeof(vf_broadcast), &vf_broadcast)
leaking up to 26 bytes of uninitialised kernel stack per VF per
RTM_GETLINK request, repeatable.
The other vf_* structs in the same function are explicitly zeroed
for exactly this reason - see the memset() calls for ivi,
vf_vlan_info, node_guid and port_guid a few lines above.
vf_broadcast was simply missed when it was added.
Reachability: any unprivileged local process can open AF_NETLINK /
NETLINK_ROUTE without capabilities and send RTM_GETLINK with an
IFLA_EXT_MASK attribute carrying RTEXT_FILTER_VF. The kernel walks
each VF and emits IFLA_VF_BROADCAST, leaking 26 bytes of stack per
VF per request. Stack residue at this call site can include return
addresses and transient sensitive data; KASAN with stack
instrumentation, or KMSAN, will flag the nla_put() when reproduced.
Zero the on-stack struct before the partial memcpy, matching the
existing pattern used for the other vf_* structs in the same
function. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: check for nEPT/nNPT in slow flush hypercalls
Checking is_guest_mode(vcpu) is incorrect, because translate_nested_gpa()
is only valid if an L2 guest is running *with nested EPT/NPT enabled*.
Instead use the same condition as translate_nested_gpa() itself. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix double free in create_space_info() error path
When kobject_init_and_add() fails, the call chain is:
create_space_info()
-> btrfs_sysfs_add_space_info_type()
-> kobject_init_and_add()
-> failure
-> kobject_put(&space_info->kobj)
-> space_info_release()
-> kfree(space_info)
Then control returns to create_space_info():
btrfs_sysfs_add_space_info_type() returns error
-> goto out_free
-> kfree(space_info)
This causes a double free.
Keep the direct kfree(space_info) for the earlier failure path, but
after btrfs_sysfs_add_space_info_type() has called kobject_put(), let
the kobject release callback handle the cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ocrdma: Don't NULL deref uctx on errors in ocrdma_copy_pd_uresp()
Sashiko points out that pd->uctx isn't initialized until late in the
function so all these error flow references are NULL and will crash. Use
the uctx that isn't NULL. |
