| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In N2W before 4.3.2 and 4.4.x before 4.4.1, there is potential remote code execution and account credentials theft because of a spoofing vulnerability. |
| In N2W before 4.3.2 and 4.4.0 before 4.4.1, improper validation of API request parameters enables remote code execution. |
| OpenAEV is an open source platform allowing organizations to plan, schedule and conduct cyber adversary simulation campaign and tests. Starting in version 1.0.0 and prior to version 2.0.13, OpenAEV's password reset implementation contains multiple security weaknesses that together allow reliable account takeover. The primary issue is that password reset tokens do not expire. Once a token is generated, it remains valid indefinitely, even if significant time has passed or if newer tokens are issued for the same account. This allows an attacker to accumulate valid password reset tokens over time and reuse them at any point in the future to reset a victim’s password. A secondary weakness is that password reset tokens are only 8 digits long. While an 8-digit numeric token provides 100,000,000 possible combinations (which is secure enough), the ability to generate large numbers of valid tokens drastically reduces the required number of attempts to guess a valid password reset token. For example, if an attacker generates 2,000 valid tokens, the brute-force effort is reduced to approximately 50,000 attempts, which is a trivially achievable number of requests for an automated attack. (100 requests per second can mathematically find a valid password reset token in 500 seconds.) By combining these flaws, an attacker can mass-generate valid password reset tokens and then brute-force them efficiently until a match is found, allowing the attacker to reset the victim’s password to a value of their choosing. The original password is not required, and the attack can be performed entirely without authentication. This vulnerability enables full account takeover that leads to platform compromise. An unauthenticated remote attacker can reset the password of any registered user account and gain complete access without authentication. Because user email addresses are exposed to other users by design, a single guessed or observed email address is sufficient to compromise even administrator accounts with non-guessable email addresses. This design flaw results in a reliable and scalable account takeover vulnerability that affects any registered user account in the system. Note: The vulnerability does not require OpenAEV to have the email service configured. The exploit does not depend on the target email address to be a real email address. It just needs to be registered to OpenAEV. Successful exploitation allows an unauthenticated remote attacker to access sensitive data (such as the Findings section of a simulation), modify payloads executed by deployed agents to compromise all hosts where agents are installed (therefore the Scope is changed). Users should upgrade to version 2.0.13 to receive a fix. |
| HCL AION is affected by a Cookie with Insecure, Improper, or Missing SameSite vulnerability. This can allow cookies to be sent in cross-site requests, potentially increasing exposure to cross-site request forgery and related security risks. This issue affects AION: 2.0. |
| Root File System Not Mounted as Read-Only configuration vulnerability. This can allow unintended modifications to critical system files, potentially increasing the risk of system compromise or unauthorized changes.This issue affects AION: 2.0. |
| A Potential Command Injection vulnerability in HCL AION.
An This can allow unintended command execution, potentially leading to unauthorized actions on the underlying system.This issue affects AION: 2.0 |
| A vulnerability
Cacheable SSL Page Found vulnerability has been identified
in HCL AION.
Cached data may expose credentials, system identifiers, or internal file paths to attackers with access to the device or browser
This issue affects AION: 2.0. |
| A security vulnerability has been detected in Cesanta Mongoose up to 7.20. This issue affects the function mg_aes_gcm_decrypt of the file /src/tls_aes128.c of the component GCM Authentication Tag Handler. Such manipulation leads to improper verification of cryptographic signature. The attack may be performed from remote. A high complexity level is associated with this attack. The exploitability is assessed as difficult. The exploit has been disclosed publicly and may be used. Upgrading to version 7.21 is capable of addressing this issue. It is advisable to upgrade the affected component. VulDB has contacted the vendor early and they confirmed quickly, that this issue got fixed already. |
| A flaw was identified in the RAR5 archive decompression logic of the libarchive library, specifically within the archive_read_data() processing path. When a specially crafted RAR5 archive is processed, the decompression routine may enter a state where internal logic prevents forward progress. This condition results in an infinite loop that continuously consumes CPU resources. Because the archive passes checksum validation and appears structurally valid, affected applications cannot detect the issue before processing. This can allow attackers to cause persistent denial-of-service conditions in services that automatically process archives. |
| A security flaw has been discovered in AstrBotDevs AstrBot up to 4.22.1. This affects the function create_template of the file astrbot/dashboard/routes/t2i.py of the component Dashboard API. The manipulation results in improper neutralization of special elements used in a template engine. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was identified in pagekit up to 1.0.18. Affected by this issue is some unknown functionality of the file /index.php/admin/system/update/download. The manipulation of the argument url leads to server-side request forgery. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in vanna-ai vanna up to 2.0.2. The affected element is an unknown function of the component Legacy Flask API. The manipulation leads to improper authorization. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Versions of the package simple-git before 3.36.0 are vulnerable to Remote Code Execution (RCE) due to an incomplete fix for [CVE-2022-25912](https://security.snyk.io/vuln/SNYK-JS-SIMPLEGIT-3112221) that blocks the -c option but not the equivalent --config form. If untrusted input can reach the options argument passed to simple-git, an attacker may still achieve remote code execution by enabling protocol.ext.allow=always and using an ext:: clone source. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_eui64: reject invalid MAC header for all packets
`eui64_mt6()` derives a modified EUI-64 from the Ethernet source address
and compares it with the low 64 bits of the IPv6 source address.
The existing guard only rejects an invalid MAC header when
`par->fragoff != 0`. For packets with `par->fragoff == 0`, `eui64_mt6()`
can still reach `eth_hdr(skb)` even when the MAC header is not valid.
Fix this by removing the `par->fragoff != 0` condition so that packets
with an invalid MAC header are rejected before accessing `eth_hdr(skb)`. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: br_nd_send: linearize skb before parsing ND options
br_nd_send() parses neighbour discovery options from ns->opt[] and
assumes that these options are in the linear part of request.
Its callers only guarantee that the ICMPv6 header and target address
are available, so the option area can still be non-linear. Parsing
ns->opt[] in that case can access data past the linear buffer.
Linearize request before option parsing and derive ns from the linear
network header. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_multiport: validate range encoding in checkentry
ports_match_v1() treats any non-zero pflags entry as the start of a
port range and unconditionally consumes the next ports[] element as
the range end.
The checkentry path currently validates protocol, flags and count, but
it does not validate the range encoding itself. As a result, malformed
rules can mark the last slot as a range start or place two range starts
back to back, leaving ports_match_v1() to step past the last valid
ports[] element while interpreting the rule.
Reject malformed multiport v1 rules in checkentry by validating that
each range start has a following element and that the following element
is not itself marked as another range start. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: flowlabel: defer exclusive option free until RCU teardown
`ip6fl_seq_show()` walks the global flowlabel hash under the seq-file
RCU read-side lock and prints `fl->opt->opt_nflen` when an option block
is present.
Exclusive flowlabels currently free `fl->opt` as soon as `fl->users`
drops to zero in `fl_release()`. However, the surrounding
`struct ip6_flowlabel` remains visible in the global hash table until
later garbage collection removes it and `fl_free_rcu()` finally tears it
down.
A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that
early `kfree()` and dereference freed option state, triggering a crash
in `ip6fl_seq_show()`.
Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches
the lifetime already required for the enclosing flowlabel while readers
can still reach it under RCU. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: validate MPLS set/set_masked payload length
validate_set() accepted OVS_KEY_ATTR_MPLS as variable-sized payload for
SET/SET_MASKED actions. In action handling, OVS expects fixed-size
MPLS key data (struct ovs_key_mpls).
Use the already normalized key_len (masked case included) and reject
non-matching MPLS action key sizes.
Reject invalid MPLS action payload lengths early. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: defer tunnel netdev_put to RCU release
ovs_netdev_tunnel_destroy() may run after NETDEV_UNREGISTER already
detached the device. Dropping the netdev reference in destroy can race
with concurrent readers that still observe vport->dev.
Do not release vport->dev in ovs_netdev_tunnel_destroy(). Instead, let
vport_netdev_free() drop the reference from the RCU callback, matching
the non-tunnel destroy path and avoiding additional synchronization
under RTNL. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - limit RX SG extraction by receive buffer budget
Make af_alg_get_rsgl() limit each RX scatterlist extraction to the
remaining receive buffer budget.
af_alg_get_rsgl() currently uses af_alg_readable() only as a gate
before extracting data into the RX scatterlist. Limit each extraction
to the remaining af_alg_rcvbuf(sk) budget so that receive-side
accounting matches the amount of data attached to the request.
If skcipher cannot obtain enough RX space for at least one chunk while
more data remains to be processed, reject the recvmsg call instead of
rounding the request length down to zero. |
