| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix circular locking dependency in run_unpack_ex
Syzbot reported a circular locking dependency between wnd->rw_lock
(sbi->used.bitmap) and ni->file.run_lock.
The deadlock scenario:
1. ntfs_extend_mft() takes ni->file.run_lock then wnd->rw_lock.
2. run_unpack_ex() takes wnd->rw_lock then tries to acquire
ni->file.run_lock inside ntfs_refresh_zone().
This creates an AB-BA deadlock.
Fix this by using down_read_trylock() instead of down_read() when
acquiring run_lock in run_unpack_ex(). If the lock is contended,
skip ntfs_refresh_zone() - the MFT zone will be refreshed on the
next MFT operation. This breaks the circular dependency since we
never block waiting for run_lock while holding wnd->rw_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umem: Fix double dma_buf_unpin in failure path
In ib_umem_dmabuf_get_pinned_with_dma_device(), the call to
ib_umem_dmabuf_map_pages() can fail. If this occurs, the dmabuf
is immediately unpinned but the umem_dmabuf->pinned flag is still
set. Then, when ib_umem_release() is called, it calls
ib_umem_dmabuf_revoke() which will call dma_buf_unpin() again.
Fix this by removing the immediate unpin upon failure and just let
the ib_umem_release/revoke path handle it. This also ensures the
proper unmap-unpin unwind ordering if the dmabuf_map_pages call
happened to fail due to dma_resv_wait_timeout (and therefore has
a non-NULL umem_dmabuf->sgt). |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode
Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation
request when device is disconnected") relies on
pci_dev_is_disconnected() to skip ATS invalidation for
safely-removed devices, but it does not cover link-down caused
by faults, which can still hard-lock the system.
For example, if a VM fails to connect to the PCIe device,
"virsh destroy" is executed to release resources and isolate
the fault, but a hard-lockup occurs while releasing the group fd.
Call Trace:
qi_submit_sync
qi_flush_dev_iotlb
intel_pasid_tear_down_entry
device_block_translation
blocking_domain_attach_dev
__iommu_attach_device
__iommu_device_set_domain
__iommu_group_set_domain_internal
iommu_detach_group
vfio_iommu_type1_detach_group
vfio_group_detach_container
vfio_group_fops_release
__fput
Although pci_device_is_present() is slower than
pci_dev_is_disconnected(), it still takes only ~70 µs on a
ConnectX-5 (8 GT/s, x2) and becomes even faster as PCIe speed
and width increase.
Besides, devtlb_invalidation_with_pasid() is called only in the
paths below, which are far less frequent than memory map/unmap.
1. mm-struct release
2. {attach,release}_dev
3. set/remove PASID
4. dirty-tracking setup
The gain in system stability far outweighs the negligible cost
of using pci_device_is_present() instead of pci_dev_is_disconnected()
to decide when to skip ATS invalidation, especially under GDR
high-load conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation
Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload
of guest state") made KVM always use vmcb01 for the fields controlled by
VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code
to always use vmcb01.
As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not
intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01
instead of the current VMCB. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
This adds a check for encryption key size upon receiving
L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which
expects L2CAP_CR_LE_BAD_KEY_SIZE. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx23885: Add missing unmap in snd_cx23885_hw_params()
In error path, add cx23885_alsa_dma_unmap() to release the
resource acquired by cx23885_alsa_dma_map(). |
| In the Linux kernel, the following vulnerability has been resolved:
reset: gpio: suppress bind attributes in sysfs
This is a special device that's created dynamically and is supposed to
stay in memory forever. We also currently don't have a devlink between
it and the actual reset consumer. Suppress sysfs bind attributes so that
user-space can't unbind the device because - as of now - it will cause a
use-after-free splat from any user that puts the reset control handle. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm6: fix uninitialized saddr in xfrm6_get_saddr()
xfrm6_get_saddr() does not check the return value of
ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable
source address (returns -EADDRNOTAVAIL), saddr->in6 is left
uninitialized, but xfrm6_get_saddr() still returns 0 (success).
This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized
address in xfrm_state_find(), triggering KMSAN warning:
=====================================================
BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940
xfrm_state_find+0x2424/0xa940
xfrm_resolve_and_create_bundle+0x906/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
xfrm_lookup_route+0x63/0x2b0
ip_route_output_flow+0x1ce/0x270
udp_sendmsg+0x2ce1/0x3400
inet_sendmsg+0x1ef/0x2a0
__sock_sendmsg+0x278/0x3d0
__sys_sendto+0x593/0x720
__x64_sys_sendto+0x130/0x200
x64_sys_call+0x332b/0x3e70
do_syscall_64+0xd3/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable tmp.i.i created at:
xfrm_resolve_and_create_bundle+0x3e3/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
=====================================================
Fix by checking the return value of ipv6_dev_get_saddr() and propagating
the error. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: magicmouse: Do not crash on missing msc->input
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, msc->input stays NULL,
leading to a crash at a later time.
Detect this condition in the input_configured() hook and reject the device.
This is not supposed to happen with actual magic mouse devices, but can be
provoked by imposing as a magic mouse USB device. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: gen1: Destroy internal buffers after FW releases
After the firmware releases internal buffers, the driver was not
destroying them. This left stale allocations that were no longer used,
especially across resolution changes where new buffers are allocated per
the updated requirements. As a result, memory was wasted until session
close.
Destroy internal buffers once the release response is received from the
firmware. |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: core: Add locking around 'mfd_of_node_list'
Manipulating a list in the kernel isn't safe without some sort of
mutual exclusion. Add a mutex any time we access / modify
'mfd_of_node_list' to prevent possible crashes. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential kernel oops when probe fails
When probe of the sdio brcmfmac device fails for some reasons (i.e.
missing firmware), the sdiodev->bus is set to error instead of NULL, thus
the cleanup later in brcmf_sdio_remove() tries to free resources via
invalid bus pointer. This happens because sdiodev->bus is set 2 times:
first in brcmf_sdio_probe() and second time in brcmf_sdiod_probe(). Fix
this by chaning the brcmf_sdio_probe() function to return the error code
and set sdio->bus only there. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: imx_rproc: Fix invalid loaded resource table detection
imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded
resource table even when the current firmware does not provide one.
When the device tree contains a "rsc-table" entry, priv->rsc_table is
non-NULL and denotes where a resource table would be located if one is
present in memory. However, when the current firmware has no resource
table, rproc->table_ptr is NULL. The function still returns
priv->rsc_table, and the remoteproc core interprets this as a valid loaded
resource table.
Fix this by returning NULL from imx_rproc_elf_find_loaded_rsc_table() when
there is no resource table for the current firmware (i.e. when
rproc->table_ptr is NULL). This aligns the function's semantics with the
remoteproc core: a loaded resource table is only reported when a valid
table_ptr exists.
With this change, starting firmware without a resource table no longer
triggers a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: Add buffer to list only after successful allocation
Move `list_add_tail()` to after `dma_alloc_attrs()` succeeds when creating
internal buffers. Previously, the buffer was enqueued in `buffers->list`
before the DMA allocation. If the allocation failed, the function returned
`-ENOMEM` while leaving a partially initialized buffer in the list, which
could lead to inconsistent state and potential leaks.
By adding the buffer to the list only after `dma_alloc_attrs()` succeeds,
we ensure the list contains only valid, fully initialized buffers. |
| Inappropriate implementation in Companion in Google Chrome on Mac prior to 148.0.7778.96 allowed a remote attacker to perform OS-level privilege escalation via malicious network traffic. (Chromium security severity: Medium) |
| Insufficient policy enforcement in Autofill in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in Preload in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Low) |
| Insufficient policy enforcement in DevTools in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to potentially perform a sandbox escape via malicious network traffic. (Chromium security severity: Low) |
| Insufficient policy enforcement in WebApp in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
perf/arm-cmn: Reject unsupported hardware configurations
So far we've been fairly lax about accepting both unknown CMN models
(at least with a warning), and unknown revisions of those which we
do know, as although things do frequently change between releases,
typically enough remains the same to be somewhat useful for at least
some basic bringup checks. However, we also make assumptions of the
maximum supported sizes and numbers of things in various places, and
there's no guarantee that something new might not be bigger and lead
to nasty array overflows. Make sure we only try to run on things that
actually match our assumptions and so will not risk memory corruption.
We have at least always failed on completely unknown node types, so
update that error message for clarity and consistency too. |
