| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-clt: Reset cid to con_num - 1 to stay in bounds
In the function init_conns(), after the create_con() and create_cm() for
loop if something fails. In the cleanup for loop after the destroy tag, we
access out of bound memory because cid is set to clt_path->s.con_num.
This commits resets the cid to clt_path->s.con_num - 1, to stay in bounds
in the cleanup loop later. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/core: Fix ib_cache_setup_one error flow cleanup
When ib_cache_update return an error, we exit ib_cache_setup_one
instantly with no proper cleanup, even though before this we had
already successfully done gid_table_setup_one, that results in
the kernel WARN below.
Do proper cleanup using gid_table_cleanup_one before returning
the err in order to fix the issue.
WARNING: CPU: 4 PID: 922 at drivers/infiniband/core/cache.c:806 gid_table_release_one+0x181/0x1a0
Modules linked in:
CPU: 4 UID: 0 PID: 922 Comm: c_repro Not tainted 6.11.0-rc1+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:gid_table_release_one+0x181/0x1a0
Code: 44 8b 38 75 0c e8 2f cb 34 ff 4d 8b b5 28 05 00 00 e8 23 cb 34 ff 44 89 f9 89 da 4c 89 f6 48 c7 c7 d0 58 14 83 e8 4f de 21 ff <0f> 0b 4c 8b 75 30 e9 54 ff ff ff 48 8 3 c4 10 5b 5d 41 5c 41 5d 41
RSP: 0018:ffffc90002b835b0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff811c8527
RDX: 0000000000000000 RSI: ffffffff811c8534 RDI: 0000000000000001
RBP: ffff8881011b3d00 R08: ffff88810b3abe00 R09: 205d303839303631
R10: 666572207972746e R11: 72746e6520444947 R12: 0000000000000001
R13: ffff888106390000 R14: ffff8881011f2110 R15: 0000000000000001
FS: 00007fecc3b70800(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000340 CR3: 000000010435a001 CR4: 00000000003706b0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? show_regs+0x94/0xa0
? __warn+0x9e/0x1c0
? gid_table_release_one+0x181/0x1a0
? report_bug+0x1f9/0x340
? gid_table_release_one+0x181/0x1a0
? handle_bug+0xa2/0x110
? exc_invalid_op+0x31/0xa0
? asm_exc_invalid_op+0x16/0x20
? __warn_printk+0xc7/0x180
? __warn_printk+0xd4/0x180
? gid_table_release_one+0x181/0x1a0
ib_device_release+0x71/0xe0
? __pfx_ib_device_release+0x10/0x10
device_release+0x44/0xd0
kobject_put+0x135/0x3d0
put_device+0x20/0x30
rxe_net_add+0x7d/0xa0
rxe_newlink+0xd7/0x190
nldev_newlink+0x1b0/0x2a0
? __pfx_nldev_newlink+0x10/0x10
rdma_nl_rcv_msg+0x1ad/0x2e0
rdma_nl_rcv_skb.constprop.0+0x176/0x210
netlink_unicast+0x2de/0x400
netlink_sendmsg+0x306/0x660
__sock_sendmsg+0x110/0x120
____sys_sendmsg+0x30e/0x390
___sys_sendmsg+0x9b/0xf0
? kstrtouint+0x6e/0xa0
? kstrtouint_from_user+0x7c/0xb0
? get_pid_task+0xb0/0xd0
? proc_fail_nth_write+0x5b/0x140
? __fget_light+0x9a/0x200
? preempt_count_add+0x47/0xa0
__sys_sendmsg+0x61/0xd0
do_syscall_64+0x50/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: get rid of online repaire on corrupted directory
syzbot reports a f2fs bug as below:
kernel BUG at fs/f2fs/inode.c:896!
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Call Trace:
evict+0x532/0x950 fs/inode.c:704
dispose_list fs/inode.c:747 [inline]
evict_inodes+0x5f9/0x690 fs/inode.c:797
generic_shutdown_super+0x9d/0x2d0 fs/super.c:627
kill_block_super+0x44/0x90 fs/super.c:1696
kill_f2fs_super+0x344/0x690 fs/f2fs/super.c:4898
deactivate_locked_super+0xc4/0x130 fs/super.c:473
cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373
task_work_run+0x24f/0x310 kernel/task_work.c:228
ptrace_notify+0x2d2/0x380 kernel/signal.c:2402
ptrace_report_syscall include/linux/ptrace.h:415 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
syscall_exit_work+0xc6/0x190 kernel/entry/common.c:173
syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
syscall_exit_to_user_mode+0x279/0x370 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Online repaire on corrupted directory in f2fs_lookup() can generate
dirty data/meta while racing w/ readonly remount, it may leave dirty
inode after filesystem becomes readonly, however, checkpoint() will
skips flushing dirty inode in a state of readonly mode, result in
above panic.
Let's get rid of online repaire in f2fs_lookup(), and leave the work
to fsck.f2fs. |
| In the Linux kernel, the following vulnerability has been resolved:
ep93xx: clock: Fix off by one in ep93xx_div_recalc_rate()
The psc->div[] array has psc->num_div elements. These values come from
when we call clk_hw_register_div(). It's adc_divisors and
ARRAY_SIZE(adc_divisors)) and so on. So this condition needs to be >=
instead of > to prevent an out of bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
Ff the device returns page 0xb1 with length 8 (happens with qemu v2.x, for
example), sd_read_block_characteristics() may attempt an out-of-bounds
memory access when accessing the zoned field at offset 8. |
| In the Linux kernel, the following vulnerability has been resolved:
vfs: fix race between evice_inodes() and find_inode()&iput()
Hi, all
Recently I noticed a bug[1] in btrfs, after digged it into
and I believe it'a race in vfs.
Let's assume there's a inode (ie ino 261) with i_count 1 is
called by iput(), and there's a concurrent thread calling
generic_shutdown_super().
cpu0: cpu1:
iput() // i_count is 1
->spin_lock(inode)
->dec i_count to 0
->iput_final() generic_shutdown_super()
->__inode_add_lru() ->evict_inodes()
// cause some reason[2] ->if (atomic_read(inode->i_count)) continue;
// return before // inode 261 passed the above check
// list_lru_add_obj() // and then schedule out
->spin_unlock()
// note here: the inode 261
// was still at sb list and hash list,
// and I_FREEING|I_WILL_FREE was not been set
btrfs_iget()
// after some function calls
->find_inode()
// found the above inode 261
->spin_lock(inode)
// check I_FREEING|I_WILL_FREE
// and passed
->__iget()
->spin_unlock(inode) // schedule back
->spin_lock(inode)
// check (I_NEW|I_FREEING|I_WILL_FREE) flags,
// passed and set I_FREEING
iput() ->spin_unlock(inode)
->spin_lock(inode) ->evict()
// dec i_count to 0
->iput_final()
->spin_unlock()
->evict()
Now, we have two threads simultaneously evicting
the same inode, which may trigger the BUG(inode->i_state & I_CLEAR)
statement both within clear_inode() and iput().
To fix the bug, recheck the inode->i_count after holding i_lock.
Because in the most scenarios, the first check is valid, and
the overhead of spin_lock() can be reduced.
If there is any misunderstanding, please let me know, thanks.
[1]: https://lore.kernel.org/linux-btrfs/000000000000eabe1d0619c48986@google.com/
[2]: The reason might be 1. SB_ACTIVE was removed or 2. mapping_shrinkable()
return false when I reproduced the bug. |
| In the Linux kernel, the following vulnerability has been resolved:
icmp: change the order of rate limits
ICMP messages are ratelimited :
After the blamed commits, the two rate limiters are applied in this order:
1) host wide ratelimit (icmp_global_allow())
2) Per destination ratelimit (inetpeer based)
In order to avoid side-channels attacks, we need to apply
the per destination check first.
This patch makes the following change :
1) icmp_global_allow() checks if the host wide limit is reached.
But credits are not yet consumed. This is deferred to 3)
2) The per destination limit is checked/updated.
This might add a new node in inetpeer tree.
3) icmp_global_consume() consumes tokens if prior operations succeeded.
This means that host wide ratelimit is still effective
in keeping inetpeer tree small even under DDOS.
As a bonus, I removed icmp_global.lock as the fast path
can use a lock-free operation. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: usbtmc: prevent kernel-usb-infoleak
The syzbot reported a kernel-usb-infoleak in usbtmc_write,
we need to clear the structure before filling fields. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix state management in error path of log writing function
After commit a694291a6211 ("nilfs2: separate wait function from
nilfs_segctor_write") was applied, the log writing function
nilfs_segctor_do_construct() was able to issue I/O requests continuously
even if user data blocks were split into multiple logs across segments,
but two potential flaws were introduced in its error handling.
First, if nilfs_segctor_begin_construction() fails while creating the
second or subsequent logs, the log writing function returns without
calling nilfs_segctor_abort_construction(), so the writeback flag set on
pages/folios will remain uncleared. This causes page cache operations to
hang waiting for the writeback flag. For example,
truncate_inode_pages_final(), which is called via nilfs_evict_inode() when
an inode is evicted from memory, will hang.
Second, the NILFS_I_COLLECTED flag set on normal inodes remain uncleared.
As a result, if the next log write involves checkpoint creation, that's
fine, but if a partial log write is performed that does not, inodes with
NILFS_I_COLLECTED set are erroneously removed from the "sc_dirty_files"
list, and their data and b-tree blocks may not be written to the device,
corrupting the block mapping.
Fix these issues by uniformly calling nilfs_segctor_abort_construction()
on failure of each step in the loop in nilfs_segctor_do_construct(),
having it clean up logs and segment usages according to progress, and
correcting the conditions for calling nilfs_redirty_inodes() to ensure
that the NILFS_I_COLLECTED flag is cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup
Definitely condition dma_get_cache_alignment * defined value > 256
during driver initialization is not reason to BUG_ON(). Turn that to
graceful error out with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: iio: frequency: ad9834: Validate frequency parameter value
In ad9834_write_frequency() clk_get_rate() can return 0. In such case
ad9834_calc_freqreg() call will lead to division by zero. Checking
'if (fout > (clk_freq / 2))' doesn't protect in case of 'fout' is 0.
ad9834_write_frequency() is called from ad9834_write(), where fout is
taken from text buffer, which can contain any value.
Modify parameters checking.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix bridge mode operations when there are no VFs
Currently, trying to set the bridge mode attribute when numvfs=0 leads to a
crash:
bridge link set dev eth2 hwmode vepa
[ 168.967392] BUG: kernel NULL pointer dereference, address: 0000000000000030
[...]
[ 168.969989] RIP: 0010:mlx5_add_flow_rules+0x1f/0x300 [mlx5_core]
[...]
[ 168.976037] Call Trace:
[ 168.976188] <TASK>
[ 168.978620] _mlx5_eswitch_set_vepa_locked+0x113/0x230 [mlx5_core]
[ 168.979074] mlx5_eswitch_set_vepa+0x7f/0xa0 [mlx5_core]
[ 168.979471] rtnl_bridge_setlink+0xe9/0x1f0
[ 168.979714] rtnetlink_rcv_msg+0x159/0x400
[ 168.980451] netlink_rcv_skb+0x54/0x100
[ 168.980675] netlink_unicast+0x241/0x360
[ 168.980918] netlink_sendmsg+0x1f6/0x430
[ 168.981162] ____sys_sendmsg+0x3bb/0x3f0
[ 168.982155] ___sys_sendmsg+0x88/0xd0
[ 168.985036] __sys_sendmsg+0x59/0xa0
[ 168.985477] do_syscall_64+0x79/0x150
[ 168.987273] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 168.987773] RIP: 0033:0x7f8f7950f917
(esw->fdb_table.legacy.vepa_fdb is null)
The bridge mode is only relevant when there are multiple functions per
port. Therefore, prevent setting and getting this setting when there are no
VFs.
Note that after this change, there are no settings to change on the PF
interface using `bridge link` when there are no VFs, so the interface no
longer appears in the `bridge link` output. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_socket: fix sk refcount leaks
We must put 'sk' reference before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Limit the period on Haswell
Running the ltp test cve-2015-3290 concurrently reports the following
warnings.
perfevents: irq loop stuck!
WARNING: CPU: 31 PID: 32438 at arch/x86/events/intel/core.c:3174
intel_pmu_handle_irq+0x285/0x370
Call Trace:
<NMI>
? __warn+0xa4/0x220
? intel_pmu_handle_irq+0x285/0x370
? __report_bug+0x123/0x130
? intel_pmu_handle_irq+0x285/0x370
? __report_bug+0x123/0x130
? intel_pmu_handle_irq+0x285/0x370
? report_bug+0x3e/0xa0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? irq_work_claim+0x1e/0x40
? intel_pmu_handle_irq+0x285/0x370
perf_event_nmi_handler+0x3d/0x60
nmi_handle+0x104/0x330
Thanks to Thomas Gleixner's analysis, the issue is caused by the low
initial period (1) of the frequency estimation algorithm, which triggers
the defects of the HW, specifically erratum HSW11 and HSW143. (For the
details, please refer https://lore.kernel.org/lkml/87plq9l5d2.ffs@tglx/)
The HSW11 requires a period larger than 100 for the INST_RETIRED.ALL
event, but the initial period in the freq mode is 1. The erratum is the
same as the BDM11, which has been supported in the kernel. A minimum
period of 128 is enforced as well on HSW.
HSW143 is regarding that the fixed counter 1 may overcount 32 with the
Hyper-Threading is enabled. However, based on the test, the hardware
has more issues than it tells. Besides the fixed counter 1, the message
'interrupt took too long' can be observed on any counter which was armed
with a period < 32 and two events expired in the same NMI. A minimum
period of 32 is enforced for the rest of the events.
The recommended workaround code of the HSW143 is not implemented.
Because it only addresses the issue for the fixed counter. It brings
extra overhead through extra MSR writing. No related overcounting issue
has been reported so far. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: rockchip: Resolve unbalanced runtime PM / system PM handling
Commit e882575efc77 ("spi: rockchip: Suspend and resume the bus during
NOIRQ_SYSTEM_SLEEP_PM ops") stopped respecting runtime PM status and
simply disabled clocks unconditionally when suspending the system. This
causes problems when the device is already runtime suspended when we go
to sleep -- in which case we double-disable clocks and produce a
WARNing.
Switch back to pm_runtime_force_{suspend,resume}(), because that still
seems like the right thing to do, and the aforementioned commit makes no
explanation why it stopped using it.
Also, refactor some of the resume() error handling, because it's not
actually a good idea to re-disable clocks on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: aspeed_udc: validate endpoint index for ast udc
We should verify the bound of the array to assure that host
may not manipulate the index to point past endpoint array.
Found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix smatch static checker warning
adev->gfx.imu.funcs could be NULL |
| In the Linux kernel, the following vulnerability has been resolved:
rtmutex: Drop rt_mutex::wait_lock before scheduling
rt_mutex_handle_deadlock() is called with rt_mutex::wait_lock held. In the
good case it returns with the lock held and in the deadlock case it emits a
warning and goes into an endless scheduling loop with the lock held, which
triggers the 'scheduling in atomic' warning.
Unlock rt_mutex::wait_lock in the dead lock case before issuing the warning
and dropping into the schedule for ever loop.
[ tglx: Moved unlock before the WARN(), removed the pointless comment,
massaged changelog, added Fixes tag ] |
| In the Linux kernel, the following vulnerability has been resolved:
sched: sch_cake: fix bulk flow accounting logic for host fairness
In sch_cake, we keep track of the count of active bulk flows per host,
when running in dst/src host fairness mode, which is used as the
round-robin weight when iterating through flows. The count of active
bulk flows is updated whenever a flow changes state.
This has a peculiar interaction with the hash collision handling: when a
hash collision occurs (after the set-associative hashing), the state of
the hash bucket is simply updated to match the new packet that collided,
and if host fairness is enabled, that also means assigning new per-host
state to the flow. For this reason, the bulk flow counters of the
host(s) assigned to the flow are decremented, before new state is
assigned (and the counters, which may not belong to the same host
anymore, are incremented again).
Back when this code was introduced, the host fairness mode was always
enabled, so the decrement was unconditional. When the configuration
flags were introduced the *increment* was made conditional, but
the *decrement* was not. Which of course can lead to a spurious
decrement (and associated wrap-around to U16_MAX).
AFAICT, when host fairness is disabled, the decrement and wrap-around
happens as soon as a hash collision occurs (which is not that common in
itself, due to the set-associative hashing). However, in most cases this
is harmless, as the value is only used when host fairness mode is
enabled. So in order to trigger an array overflow, sch_cake has to first
be configured with host fairness disabled, and while running in this
mode, a hash collision has to occur to cause the overflow. Then, the
qdisc has to be reconfigured to enable host fairness, which leads to the
array out-of-bounds because the wrapped-around value is retained and
used as an array index. It seems that syzbot managed to trigger this,
which is quite impressive in its own right.
This patch fixes the issue by introducing the same conditional check on
decrement as is used on increment.
The original bug predates the upstreaming of cake, but the commit listed
in the Fixes tag touched that code, meaning that this patch won't apply
before that. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: the warning dereferencing obj for nbio_v7_4
if ras_manager obj null, don't print NBIO err data |
