| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cross-site Scripting (XSS) allows an attacker to submit specially crafted data to the application which is returned unaltered in the resulting web page. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false
A UAF issue occurs when the virtio_net driver is configured with napi_tx=N
and the device's IFF_XMIT_DST_RELEASE flag is cleared
(e.g., during the configuration of tc route filter rules).
When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack
expects the driver to hold the reference to skb->dst until the packet
is fully transmitted and freed. In virtio_net with napi_tx=N,
skbs may remain in the virtio transmit ring for an extended period.
If the network namespace is destroyed while these skbs are still pending,
the corresponding dst_ops structure has freed. When a subsequent packet
is transmitted, free_old_xmit() is triggered to clean up old skbs.
It then calls dst_release() on the skb associated with the stale dst_entry.
Since the dst_ops (referenced by the dst_entry) has already been freed,
a UAF kernel paging request occurs.
fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release
the dst reference before the skb is queued in virtio_net.
Call Trace:
Unable to handle kernel paging request at virtual address ffff80007e150000
CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT
...
percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)
dst_release+0xe0/0x110 net/core/dst.c:177
skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177
sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255
dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469
napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527
__free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]
free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]
start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]
...
Reproduction Steps:
NETDEV="enp3s0"
config_qdisc_route_filter() {
tc qdisc del dev $NETDEV root
tc qdisc add dev $NETDEV root handle 1: prio
tc filter add dev $NETDEV parent 1:0 \
protocol ip prio 100 route to 100 flowid 1:1
ip route add 192.168.1.100/32 dev $NETDEV realm 100
}
test_ns() {
ip netns add testns
ip link set $NETDEV netns testns
ip netns exec testns ifconfig $NETDEV 10.0.32.46/24
ip netns exec testns ping -c 1 10.0.32.1
ip netns del testns
}
config_qdisc_route_filter
test_ns
sleep 2
test_ns |
| Little CMS (lcms2) through 2.18 has an integer overflow in CubeSize in cmslut.c because the overflow check is performed after the multiplication. |
| MiCode FileExplorer contains an authentication bypass vulnerability in the embedded SwiFTP FTP server component that allows network attackers to log in without valid credentials. Attackers can send arbitrary username and password combinations to the PASS command handler, which unconditionally grants access and allows listing, reading, writing, and deleting files exposed by the FTP server. The MiCode/Explorer open source project has reached end-of-life status. |
| A Cross-Site Scripting (XSS) vulnerability was found in PHPGurukal Hospital Management System v4.0 in the /hospital/hms/edit-profile.php page. This flaw allows an authenticated attacker (patient) to inject a malicious script payload into the User Name parameter, which is stored in the application and later rendered in the doctor s interface. |
| Dagster is an orchestration platform for the development, production, and observation of data assets. Prior to Dagster Core version 1.13.1 and prior to Dagster libraries version 0.29.1, the DuckDB, Snowflake, BigQuery, and DeltaLake I/O managers constructed SQL WHERE clauses by interpolating dynamic partition key values into queries without escaping. A user with the Add Dynamic Partitions permission could create a partition key that injects arbitrary SQL, which would execute against the target database backend under the I/O manager's credentials. Only deployments that use dynamic partitions are affected. Pipelines using static or time-window partitions are not impacted. This issue has been patched in Dagster Core version 1.13.1 and Dagster libraries version 0.29.1. |
| Weblate is a web based localization tool. Prior to version 5.17.1, an authenticated user with project.add permission (default on hosted Weblate SaaS and for any user holding an active billing/trial plan) can import a crafted project backup ZIP whose components/<name>.json contains an attacker-chosen repo URL pointing at a private address (e.g. http://127.0.0.1:9999/) or using a non-allow-listed scheme (e.g. file://, git://). Weblate persists the component via Component.objects.bulk_create([component])[0], which bypasses Django's full_clean() and therefore never runs the validate_repo_url validator. The URL is subsequently written verbatim into .git/config by configure_repo(pull=False). This issue has been patched in version 5.17.1. |
| Weblate is a web based localization tool. Prior to version 5.17.1, when a user changes their password, browser sessions are correctly invalidated via "cycle_session_keys()", but DRF API tokens ("wlu_*" prefix) stored in "authtoken_token" are not revoked. This issue has been patched in version 5.17.1. |
| Weblate is a web based localization tool. Prior to version 5.17.1, the screenshots, tasks, and component link API allowed for the enumeration of translations in a project inaccessible to the user. This issue has been patched in version 5.17.1. |
| Weblate is a web based localization tool. Prior to version 5.17.1, the Markdown renderer used in user comments and other user-provided content didn't properly sanitize some attributes. This issue has been patched in version 5.17.1. |
| Medtronic MyCareLink Patient Monitor has an internal serial interface, which allows an attacker with physical access to access a login prompt via a UART terminal. |
| Medtronic MyCareLink Patient Monitor uses per-product credentials that are stored in a recoverable format. An attacker can use these credentials to modify encrypted drive data. |
| A buffer overflow vulnerability in the User-ID™ Authentication Portal (aka Captive Portal) service of Palo Alto Networks PAN-OS software allows an unauthenticated attacker to execute arbitrary code with root privileges on the PA-Series and VM-Series firewalls by sending specially crafted packets.
The risk of this issue is greatly reduced if you secure access to the User-ID™ Authentication Portal per the best practice guidelines https://knowledgebase.paloaltonetworks.com/KCSArticleDetail by restricting access to only trusted internal IP addresses.
Prisma Access, Cloud NGFW and Panorama appliances are not impacted by this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
virt: tdx-guest: Fix handling of host controlled 'quote' buffer length
Validate host controlled value `quote_buf->out_len` that determines how
many bytes of the quote are copied out to guest userspace. In TDX
environments with remote attestation, quotes are not considered private,
and can be forwarded to an attestation server.
Catch scenarios where the host specifies a response length larger than
the guest's allocation, or otherwise races modifying the response while
the guest consumes it.
This prevents contents beyond the pages allocated for `quote_buf`
(up to TSM_REPORT_OUTBLOB_MAX) from being read out to guest userspace,
and possibly forwarded in attestation requests.
Recall that some deployments want per-container configs-tsm-report
interfaces, so the leak may cross container protection boundaries, not
just local root. |
| OpenClaw before 2026.4.9 contains a file read vulnerability allowing attackers to bypass navigation guards through browser act/evaluate interactions. Attackers can pivot into the local CDP origin and create or read disallowed file:// pages despite direct navigation policy restrictions. |
| OpenClaw versions 2026.4.10 before 2026.4.14 fail to persist session context during delivery queue recovery for media replay. Attackers can exploit recovered queued outbound media to bypass group tool policy enforcement and weaken channel media restrictions after service restart or recovery. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Address thermal zone removal races with resume
Since thermal_zone_pm_complete() and thermal_zone_device_resume()
re-initialize the poll_queue delayed work for the given thermal zone,
the cancel_delayed_work_sync() in thermal_zone_device_unregister()
may miss some already running work items and the thermal zone may
be freed prematurely [1].
There are two failing scenarios that both start with
running thermal_pm_notify_complete() right before invoking
thermal_zone_device_unregister() for one of the thermal zones.
In the first scenario, there is a work item already running for
the given thermal zone when thermal_pm_notify_complete() calls
thermal_zone_pm_complete() for that thermal zone and it continues to
run when thermal_zone_device_unregister() starts. Since the poll_queue
delayed work has been re-initialized by thermal_pm_notify_complete(), the
running work item will be missed by the cancel_delayed_work_sync() in
thermal_zone_device_unregister() and if it continues to run past the
freeing of the thermal zone object, a use-after-free will occur.
In the second scenario, thermal_zone_device_resume() queued up by
thermal_pm_notify_complete() runs right after the thermal_zone_exit()
called by thermal_zone_device_unregister() has returned. The poll_queue
delayed work is re-initialized by it before cancel_delayed_work_sync() is
called by thermal_zone_device_unregister(), so it may continue to run
after the freeing of the thermal zone object, which also leads to a
use-after-free.
Address the first failing scenario by ensuring that no thermal work
items will be running when thermal_pm_notify_complete() is called.
For this purpose, first move the cancel_delayed_work() call from
thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent
new work from entering the workqueue going forward. Next, switch
over to using a dedicated workqueue for thermal events and update
the code in thermal_pm_notify() to flush that workqueue after
thermal_pm_notify_prepare() has returned which will take care of
all leftover thermal work already on the workqueue (that leftover
work would do nothing useful anyway because all of the thermal zones
have been flagged as suspended).
The second failing scenario is addressed by adding a tz->state check
to thermal_zone_device_resume() to prevent it from re-initializing
the poll_queue delayed work if the thermal zone is going away.
Note that the above changes will also facilitate relocating the suspend
and resume of thermal zones closer to the suspend and resume of devices,
respectively. |
| Inappropriate implementation in MHTML in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who convinced a user to engage in specific UI gestures to leak cross-origin data via a crafted MHTML page. (Chromium security severity: Low) |
| OpenClaw before 2026.4.22 contains a time-of-check/time-of-use race condition in OpenShell sandbox filesystem writes that allows attackers to redirect writes outside the intended mount root. Attackers can exploit symlink swaps during filesystem operations to bypass sandbox restrictions and write files outside the local mount root. |
| Incus is a system container and virtual machine manager. In versions before 7.0.0, missing validation logic in the storage bucket import logic allows an authenticated user with access to the storage bucket feature to cause the Incus daemon to crash. The vulnerability is present in the backup metadata handling logic, where the daemon processes the index.yaml file from an imported archive and accesses members of the parsed backup configuration without first verifying that the configuration object was initialized. A malicious or malformed index.yaml that omits the config block causes a nil-pointer dereference during bucket import operations and terminates the daemon. Repeated use of this issue can be used to keep Incus offline, causing a denial of service. This issue is fixed in version 7.0.0. |
