| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: txgbe: leave space for null terminators on property_entry
Lists of struct property_entry are supposed to be terminated with an
empty property, this driver currently seems to be allocating exactly the
amount of entry used.
Change the struct definition to leave an extra element for all
property_entry. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm_user: fix info leak in build_mapping()
struct xfrm_usersa_id has a one-byte padding hole after the proto
field, which ends up never getting set to zero before copying out to
userspace. Fix that up by zeroing out the whole structure before
setting individual variables. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv: Fix infinite fault loop on permission-denied GPA intercepts
Prevent infinite fault loops when guests access memory regions without
proper permissions. Currently, mshv_handle_gpa_intercept() attempts to
remap pages for all faults on movable memory regions, regardless of
whether the access type is permitted. When a guest writes to a read-only
region, the remap succeeds but the region remains read-only, causing
immediate re-fault and spinning the vCPU indefinitely.
Validate intercept access type against region permissions before
attempting remaps. Reject writes to non-writable regions and executes to
non-executable regions early, returning false to let the VMM handle the
intercept appropriately.
This also closes a potential DoS vector where malicious guests could
intentionally trigger these fault loops to consume host resources. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lapbether: handle NETDEV_PRE_TYPE_CHANGE
lapbeth_data_transmit() expects the underlying device type
to be ARPHRD_ETHER.
Returning NOTIFY_BAD from lapbeth_device_event() makes sure
bonding driver can not break this expectation. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda: Fix NULL pointer dereference
If there's a mismatch between the DAI links in the machine driver and
the topology, it is possible that the playback/capture widget is not
set, especially in the case of loopback capture for echo reference
where we use the dummy DAI link. Return the error when the widget is not
set to avoid a null pointer dereference like below when the topology is
broken.
RIP: 0010:hda_dai_get_ops.isra.0+0x14/0xa0 [snd_sof_intel_hda_common] |
| In the Linux kernel, the following vulnerability has been resolved:
net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean()
The priv->rx_buffer and priv->tx_buffer are alloc'd together as
contiguous buffers in uhdlc_init() but freed as two buffers in
uhdlc_memclean().
Change the cleanup to only call dma_free_coherent() once on the whole
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
team: avoid NETDEV_CHANGEMTU event when unregistering slave
syzbot is reporting
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3
ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_hold include/linux/netdevice.h:4429 [inline]
inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286
inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline]
netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886
netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907
dev_set_mtu+0x126/0x260 net/core/dev_api.c:248
team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333
team_del_slave drivers/net/team/team_core.c:1936 [inline]
team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2281 [inline]
call_netdevice_notifiers net/core/dev.c:2295 [inline]
__dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592
do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060
rtnl_changelink net/core/rtnetlink.c:3776 [inline]
__rtnl_newlink net/core/rtnetlink.c:3935 [inline]
rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
problem. Ido Schimmel found steps to reproduce
ip link add name team1 type team
ip link add name dummy1 mtu 1499 master team1 type dummy
ip netns add ns1
ip link set dev dummy1 netns ns1
ip -n ns1 link del dev dummy1
and also found that the same issue was fixed in the bond driver in
commit f51048c3e07b ("bonding: avoid NETDEV_CHANGEMTU event when
unregistering slave").
Let's do similar thing for the team driver, with commit ad7c7b2172c3 ("net:
hold netdev instance lock during sysfs operations") and commit 303a8487a657
("net: s/__dev_set_mtu/__netif_set_mtu/") also applied. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: Add missing platform data entries for SM8750
Two platform-data fields for SM8750 were missed:
- get_vpu_buffer_size = iris_vpu33_buf_size
Without this, the driver fails to allocate the required internal
buffers, leading to basic decode/encode failures during session
bring-up.
- max_core_mbps = ((7680 * 4320) / 256) * 60
Without this capability exposed, capability checks are incomplete and
v4l2-compliance for encoder fails. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kexec: add a sanity check on previous kernel's ima kexec buffer
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>", the physical range that contains the carried
over IMA measurement list may fall outside the truncated RAM leading to a
kernel panic.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) – not-present page
Other architectures already validate the range with page_is_ram(), as done
in commit cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer
against memory bounds") do a similar check on x86.
Without carrying the measurement list across kexec, the attestation
would fail. |
| In the Linux kernel, the following vulnerability has been resolved:
kcm: fix zero-frag skb in frag_list on partial sendmsg error
Syzkaller reported a warning in kcm_write_msgs() when processing a
message with a zero-fragment skb in the frag_list.
When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb,
it allocates a new skb (tskb) and links it into the frag_list before
copying data. If the copy subsequently fails (e.g. -EFAULT from
user memory), tskb remains in the frag_list with zero fragments:
head skb (msg being assembled, NOT yet in sk_write_queue)
+-----------+
| frags[17] | (MAX_SKB_FRAGS, all filled with data)
| frag_list-+--> tskb
+-----------+ +----------+
| frags[0] | (empty! copy failed before filling)
+----------+
For SOCK_SEQPACKET with partial data already copied, the error path
saves this message via partial_message for later completion. For
SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a
subsequent zero-length write(fd, NULL, 0) completes the message and
queues it to sk_write_queue. kcm_write_msgs() then walks the
frag_list and hits:
WARN_ON(!skb_shinfo(skb)->nr_frags)
TCP has a similar pattern where skbs are enqueued before data copy
and cleaned up on failure via tcp_remove_empty_skb(). KCM was
missing the equivalent cleanup.
Fix this by tracking the predecessor skb (frag_prev) when allocating
a new frag_list entry. On error, if the tail skb has zero frags,
use frag_prev to unlink and free it in O(1) without walking the
singly-linked frag_list. frag_prev is safe to dereference because
the entire message chain is only held locally (or in kcm->seq_skb)
and is not added to sk_write_queue until MSG_EOR, so the send path
cannot free it underneath us.
Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log
if the condition is somehow hit repeatedly.
There are currently no KCM selftests in the kernel tree; a simple
reproducer is available at [1].
[1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa |
| In the Linux kernel, the following vulnerability has been resolved:
usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()
The ChipIdea UDC driver can encounter "not page aligned sg buffer"
errors when a USB device is reconnected after being disconnected
during an active transfer. This occurs because _ep_nuke() returns
requests to the gadget layer without properly unmapping DMA buffers
or cleaning up scatter-gather bounce buffers.
Root cause:
When a disconnect happens during a multi-segment DMA transfer, the
request's num_mapped_sgs field and sgt.sgl pointer remain set with
stale values. The request is returned to the gadget driver with status
-ESHUTDOWN but still has active DMA state. If the gadget driver reuses
this request on reconnect without reinitializing it, the stale DMA
state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero
num_mapped_sgs) and attempt to use freed/invalid DMA addresses,
leading to alignment errors and potential memory corruption.
The normal completion path via _hardware_dequeue() properly calls
usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before
returning the request. The _ep_nuke() path must do the same cleanup
to ensure requests are returned in a clean, reusable state.
Fix:
Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror
the cleanup sequence in _hardware_dequeue():
- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set
- Call sglist_do_debounce() with copy=false if bounce buffer exists
This ensures that when requests are returned due to endpoint shutdown,
they don't retain stale DMA mappings. The 'false' parameter to
sglist_do_debounce() prevents copying data back (appropriate for
shutdown path where transfer was aborted). |
| Out of bounds read and write in V8 in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Insufficient data validation in DevTools in Google Chrome on Android prior to 148.0.7778.96 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: High) |
| Insufficient data validation in InterestGroups in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Object lifecycle issue in V8 in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in ServiceWorker in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in Canvas in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to bypass same origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in Chromoting in Google Chrome on Windows prior to 148.0.7778.96 allowed a local attacker to perform OS-level privilege escalation via a malicious file. (Chromium security severity: Medium) |
| The Forminator Forms plugin for WordPress is vulnerable to Missing Authorization in versions up to and including 1.51.1. This is due to the `processRequest()` method in `Forminator_Admin_Module_Edit_Page` (admin/abstracts/class-admin-module-edit-page.php) dispatching sensitive module-management actions — including export, delete, clone, delete-entries, publish/draft, and bulk variants — after only a nonce check, without ever verifying that the current user holds the `manage_forminator_modules` capability. The nonce used (`forminator_form_request`) is unconditionally embedded in the global `forminatorData` JavaScript object and localized on every Forminator admin page, including Templates and Reports pages accessible to users who explicitly lack module-management permissions. Because `processRequest()` is invoked during the `admin_menu` action hook — which fires before WordPress enforces page-level capability checks — a user whose Forminator role is restricted to Templates or Reports can craft a valid POST request targeting any published module and successfully trigger the vulnerable actions. This makes it possible for authenticated attackers with subscriber-level access (or any custom low-privilege Forminator role) to export the complete internal configuration of arbitrary forms/polls/quizzes (including notification routing, integration credentials, and conditional logic), delete modules, delete all submissions/votes, clone modules, or bulk-change publish/draft status. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-pl: handle probe errors
Errors in init must be reported back or we'll
follow a NULL pointer the first time FF is used. |
