| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Fix userfaultfd_api to return EINVAL as expected
Currently if we request a feature that is not set in the Kernel config we
fail silently and return all the available features. However, the man
page indicates we should return an EINVAL.
We need to fix this issue since we can end up with a Kernel warning should
a program request the feature UFFD_FEATURE_WP_UNPOPULATED on a kernel with
the config not set with this feature.
[ 200.812896] WARNING: CPU: 91 PID: 13634 at mm/memory.c:1660 zap_pte_range+0x43d/0x660
[ 200.820738] Modules linked in:
[ 200.869387] CPU: 91 PID: 13634 Comm: userfaultfd Kdump: loaded Not tainted 6.9.0-rc5+ #8
[ 200.877477] Hardware name: Dell Inc. PowerEdge R6525/0N7YGH, BIOS 2.7.3 03/30/2022
[ 200.885052] RIP: 0010:zap_pte_range+0x43d/0x660 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq()
The "instance" variable needs to be signed for the error handling to work. |
| In the Linux kernel, the following vulnerability has been resolved:
filelock: Fix fcntl/close race recovery compat path
When I wrote commit 3cad1bc01041 ("filelock: Remove locks reliably when
fcntl/close race is detected"), I missed that there are two copies of the
code I was patching: The normal version, and the version for 64-bit offsets
on 32-bit kernels.
Thanks to Greg KH for stumbling over this while doing the stable
backport...
Apply exactly the same fix to the compat path for 32-bit kernels. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Validate ff offset
This adds sanity checks for ff offset. There is a check
on rt->first_free at first, but walking through by ff
without any check. If the second ff is a large offset.
We may encounter an out-of-bound read. |
| In the Linux kernel, the following vulnerability has been resolved:
filelock: Remove locks reliably when fcntl/close race is detected
When fcntl_setlk() races with close(), it removes the created lock with
do_lock_file_wait().
However, LSMs can allow the first do_lock_file_wait() that created the lock
while denying the second do_lock_file_wait() that tries to remove the lock.
Separately, posix_lock_file() could also fail to
remove a lock due to GFP_KERNEL allocation failure (when splitting a range
in the middle).
After the bug has been triggered, use-after-free reads will occur in
lock_get_status() when userspace reads /proc/locks. This can likely be used
to read arbitrary kernel memory, but can't corrupt kernel memory.
Fix it by calling locks_remove_posix() instead, which is designed to
reliably get rid of POSIX locks associated with the given file and
files_struct and is also used by filp_flush(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: don't allow mapping the MMIO HDP page with large pages
We don't get the right offset in that case. The GPU has
an unused 4K area of the register BAR space into which you can
remap registers. We remap the HDP flush registers into this
space to allow userspace (CPU or GPU) to flush the HDP when it
updates VRAM. However, on systems with >4K pages, we end up
exposing PAGE_SIZE of MMIO space. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix overrunning reservations in ringbuf
The BPF ring buffer internally is implemented as a power-of-2 sized circular
buffer, with two logical and ever-increasing counters: consumer_pos is the
consumer counter to show which logical position the consumer consumed the
data, and producer_pos which is the producer counter denoting the amount of
data reserved by all producers.
Each time a record is reserved, the producer that "owns" the record will
successfully advance producer counter. In user space each time a record is
read, the consumer of the data advanced the consumer counter once it finished
processing. Both counters are stored in separate pages so that from user
space, the producer counter is read-only and the consumer counter is read-write.
One aspect that simplifies and thus speeds up the implementation of both
producers and consumers is how the data area is mapped twice contiguously
back-to-back in the virtual memory, allowing to not take any special measures
for samples that have to wrap around at the end of the circular buffer data
area, because the next page after the last data page would be first data page
again, and thus the sample will still appear completely contiguous in virtual
memory.
Each record has a struct bpf_ringbuf_hdr { u32 len; u32 pg_off; } header for
book-keeping the length and offset, and is inaccessible to the BPF program.
Helpers like bpf_ringbuf_reserve() return `(void *)hdr + BPF_RINGBUF_HDR_SZ`
for the BPF program to use. Bing-Jhong and Muhammad reported that it is however
possible to make a second allocated memory chunk overlapping with the first
chunk and as a result, the BPF program is now able to edit first chunk's
header.
For example, consider the creation of a BPF_MAP_TYPE_RINGBUF map with size
of 0x4000. Next, the consumer_pos is modified to 0x3000 /before/ a call to
bpf_ringbuf_reserve() is made. This will allocate a chunk A, which is in
[0x0,0x3008], and the BPF program is able to edit [0x8,0x3008]. Now, lets
allocate a chunk B with size 0x3000. This will succeed because consumer_pos
was edited ahead of time to pass the `new_prod_pos - cons_pos > rb->mask`
check. Chunk B will be in range [0x3008,0x6010], and the BPF program is able
to edit [0x3010,0x6010]. Due to the ring buffer memory layout mentioned
earlier, the ranges [0x0,0x4000] and [0x4000,0x8000] point to the same data
pages. This means that chunk B at [0x4000,0x4008] is chunk A's header.
bpf_ringbuf_submit() / bpf_ringbuf_discard() use the header's pg_off to then
locate the bpf_ringbuf itself via bpf_ringbuf_restore_from_rec(). Once chunk
B modified chunk A's header, then bpf_ringbuf_commit() refers to the wrong
page and could cause a crash.
Fix it by calculating the oldest pending_pos and check whether the range
from the oldest outstanding record to the newest would span beyond the ring
buffer size. If that is the case, then reject the request. We've tested with
the ring buffer benchmark in BPF selftests (./benchs/run_bench_ringbufs.sh)
before/after the fix and while it seems a bit slower on some benchmarks, it
is still not significantly enough to matter. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: avoid too many retransmit packets
If a TCP socket is using TCP_USER_TIMEOUT, and the other peer
retracted its window to zero, tcp_retransmit_timer() can
retransmit a packet every two jiffies (2 ms for HZ=1000),
for about 4 minutes after TCP_USER_TIMEOUT has 'expired'.
The fix is to make sure tcp_rtx_probe0_timed_out() takes
icsk->icsk_user_timeout into account.
Before blamed commit, the socket would not timeout after
icsk->icsk_user_timeout, but would use standard exponential
backoff for the retransmits.
Also worth noting that before commit e89688e3e978 ("net: tcp:
fix unexcepted socket die when snd_wnd is 0"), the issue
would last 2 minutes instead of 4. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/sec - Fix memory leak for sec resource release
The AIV is one of the SEC resources. When releasing resources,
it need to release the AIV resources at the same time.
Otherwise, memory leakage occurs.
The aiv resource release is added to the sec resource release
function. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/sqpoll: work around a potential audit memory leak
kmemleak complains that there's a memory leak related to connect
handling:
unreferenced object 0xffff0001093bdf00 (size 128):
comm "iou-sqp-455", pid 457, jiffies 4294894164
hex dump (first 32 bytes):
02 00 fa ea 7f 00 00 01 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 2e481b1a):
[<00000000c0a26af4>] kmemleak_alloc+0x30/0x38
[<000000009c30bb45>] kmalloc_trace+0x228/0x358
[<000000009da9d39f>] __audit_sockaddr+0xd0/0x138
[<0000000089a93e34>] move_addr_to_kernel+0x1a0/0x1f8
[<000000000b4e80e6>] io_connect_prep+0x1ec/0x2d4
[<00000000abfbcd99>] io_submit_sqes+0x588/0x1e48
[<00000000e7c25e07>] io_sq_thread+0x8a4/0x10e4
[<00000000d999b491>] ret_from_fork+0x10/0x20
which can can happen if:
1) The command type does something on the prep side that triggers an
audit call.
2) The thread hasn't done any operations before this that triggered
an audit call inside ->issue(), where we have audit_uring_entry()
and audit_uring_exit().
Work around this by issuing a blanket NOP operation before the SQPOLL
does anything. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid splat in pskb_pull_reason
syzkaller builds (CONFIG_DEBUG_NET=y) frequently trigger a debug
hint in pskb_may_pull.
We'd like to retain this debug check because it might hint at integer
overflows and other issues (kernel code should pull headers, not huge
value).
In bpf case, this splat isn't interesting at all: such (nonsensical)
bpf programs are typically generated by a fuzzer anyway.
Do what Eric suggested and suppress such warning.
For CONFIG_DEBUG_NET=n we don't need the extra check because
pskb_may_pull will do the right thing: return an error without the
WARN() backtrace. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: fix integer overflow in max_vclocks_store
On 32bit systems, the "4 * max" multiply can overflow. Use kcalloc()
to do the allocation to prevent this. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Disassociate vcpus from redistributor region on teardown
When tearing down a redistributor region, make sure we don't have
any dangling pointer to that region stored in a vcpu. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921s: fix potential hung tasks during chip recovery
During chip recovery (e.g. chip reset), there is a possible situation that
kernel worker reset_work is holding the lock and waiting for kernel thread
stat_worker to be parked, while stat_worker is waiting for the release of
the same lock.
It causes a deadlock resulting in the dumping of hung tasks messages and
possible rebooting of the device.
This patch prevents the execution of stat_worker during the chip recovery. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/lima: mask irqs in timeout path before hard reset
There is a race condition in which a rendering job might take just long
enough to trigger the drm sched job timeout handler but also still
complete before the hard reset is done by the timeout handler.
This runs into race conditions not expected by the timeout handler.
In some very specific cases it currently may result in a refcount
imbalance on lima_pm_idle, with a stack dump such as:
[10136.669170] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/lima/lima_devfreq.c:205 lima_devfreq_record_idle+0xa0/0xb0
...
[10136.669459] pc : lima_devfreq_record_idle+0xa0/0xb0
...
[10136.669628] Call trace:
[10136.669634] lima_devfreq_record_idle+0xa0/0xb0
[10136.669646] lima_sched_pipe_task_done+0x5c/0xb0
[10136.669656] lima_gp_irq_handler+0xa8/0x120
[10136.669666] __handle_irq_event_percpu+0x48/0x160
[10136.669679] handle_irq_event+0x4c/0xc0
We can prevent that race condition entirely by masking the irqs at the
beginning of the timeout handler, at which point we give up on waiting
for that job entirely.
The irqs will be enabled again at the next hard reset which is already
done as a recovery by the timeout handler. |
| In the Linux kernel, the following vulnerability has been resolved:
mips: bmips: BCM6358: make sure CBR is correctly set
It was discovered that some device have CBR address set to 0 causing
kernel panic when arch_sync_dma_for_cpu_all is called.
This was notice in situation where the system is booted from TP1 and
BMIPS_GET_CBR() returns 0 instead of a valid address and
!!(read_c0_brcm_cmt_local() & (1 << 31)); not failing.
The current check whether RAC flush should be disabled or not are not
enough hence lets check if CBR is a valid address or not. |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
input_action_end_dx4() and input_action_end_dx6() are called NF_HOOK() for
PREROUTING hook, in PREROUTING hook, we should passing a valid indev,
and a NULL outdev to NF_HOOK(), otherwise may trigger a NULL pointer
dereference, as below:
[74830.647293] BUG: kernel NULL pointer dereference, address: 0000000000000090
[74830.655633] #PF: supervisor read access in kernel mode
[74830.657888] #PF: error_code(0x0000) - not-present page
[74830.659500] PGD 0 P4D 0
[74830.660450] Oops: 0000 [#1] PREEMPT SMP PTI
...
[74830.664953] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[74830.666569] RIP: 0010:rpfilter_mt+0x44/0x15e [ipt_rpfilter]
...
[74830.689725] Call Trace:
[74830.690402] <IRQ>
[74830.690953] ? show_trace_log_lvl+0x1c4/0x2df
[74830.692020] ? show_trace_log_lvl+0x1c4/0x2df
[74830.693095] ? ipt_do_table+0x286/0x710 [ip_tables]
[74830.694275] ? __die_body.cold+0x8/0xd
[74830.695205] ? page_fault_oops+0xac/0x140
[74830.696244] ? exc_page_fault+0x62/0x150
[74830.697225] ? asm_exc_page_fault+0x22/0x30
[74830.698344] ? rpfilter_mt+0x44/0x15e [ipt_rpfilter]
[74830.699540] ipt_do_table+0x286/0x710 [ip_tables]
[74830.700758] ? ip6_route_input+0x19d/0x240
[74830.701752] nf_hook_slow+0x3f/0xb0
[74830.702678] input_action_end_dx4+0x19b/0x1e0
[74830.703735] ? input_action_end_t+0xe0/0xe0
[74830.704734] seg6_local_input_core+0x2d/0x60
[74830.705782] lwtunnel_input+0x5b/0xb0
[74830.706690] __netif_receive_skb_one_core+0x63/0xa0
[74830.707825] process_backlog+0x99/0x140
[74830.709538] __napi_poll+0x2c/0x160
[74830.710673] net_rx_action+0x296/0x350
[74830.711860] __do_softirq+0xcb/0x2ac
[74830.713049] do_softirq+0x63/0x90
input_action_end_dx4() passing a NULL indev to NF_HOOK(), and finally
trigger a NULL dereference in rpfilter_mt()->rpfilter_is_loopback():
static bool
rpfilter_is_loopback(const struct sk_buff *skb,
const struct net_device *in)
{
// in is NULL
return skb->pkt_type == PACKET_LOOPBACK ||
in->flags & IFF_LOOPBACK;
} |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix possible Use-After-Free in irq_process_work_list
Use list_for_each_entry_safe() to allow iterating through the list and
deleting the entry in the iteration process. The descriptor is freed via
idxd_desc_complete() and there's a slight chance may cause issue for
the list iterator when the descriptor is reused by another thread
without it being deleted from the list. |
| In the Linux kernel, the following vulnerability has been resolved:
net: do not leave a dangling sk pointer, when socket creation fails
It is possible to trigger a use-after-free by:
* attaching an fentry probe to __sock_release() and the probe calling the
bpf_get_socket_cookie() helper
* running traceroute -I 1.1.1.1 on a freshly booted VM
A KASAN enabled kernel will log something like below (decoded and stripped):
==================================================================
BUG: KASAN: slab-use-after-free in __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29)
Read of size 8 at addr ffff888007110dd8 by task traceroute/299
CPU: 2 PID: 299 Comm: traceroute Tainted: G E 6.10.0-rc2+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1))
print_report (mm/kasan/report.c:378 mm/kasan/report.c:488)
? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29)
kasan_report (mm/kasan/report.c:603)
? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29)
kasan_check_range (mm/kasan/generic.c:183 mm/kasan/generic.c:189)
__sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29)
bpf_get_socket_ptr_cookie (./arch/x86/include/asm/preempt.h:94 ./include/linux/sock_diag.h:42 net/core/filter.c:5094 net/core/filter.c:5092)
bpf_prog_875642cf11f1d139___sock_release+0x6e/0x8e
bpf_trampoline_6442506592+0x47/0xaf
__sock_release (net/socket.c:652)
__sock_create (net/socket.c:1601)
...
Allocated by task 299 on cpu 2 at 78.328492s:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:68)
__kasan_slab_alloc (mm/kasan/common.c:312 mm/kasan/common.c:338)
kmem_cache_alloc_noprof (mm/slub.c:3941 mm/slub.c:4000 mm/slub.c:4007)
sk_prot_alloc (net/core/sock.c:2075)
sk_alloc (net/core/sock.c:2134)
inet_create (net/ipv4/af_inet.c:327 net/ipv4/af_inet.c:252)
__sock_create (net/socket.c:1572)
__sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706)
__x64_sys_socket (net/socket.c:1718)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Freed by task 299 on cpu 2 at 78.328502s:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:68)
kasan_save_free_info (mm/kasan/generic.c:582)
poison_slab_object (mm/kasan/common.c:242)
__kasan_slab_free (mm/kasan/common.c:256)
kmem_cache_free (mm/slub.c:4437 mm/slub.c:4511)
__sk_destruct (net/core/sock.c:2117 net/core/sock.c:2208)
inet_create (net/ipv4/af_inet.c:397 net/ipv4/af_inet.c:252)
__sock_create (net/socket.c:1572)
__sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706)
__x64_sys_socket (net/socket.c:1718)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Fix this by clearing the struct socket reference in sk_common_release() to cover
all protocol families create functions, which may already attached the
reference to the sk object with sock_init_data(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
Use {READ,WRITE}_ONCE() to access kvm->last_boosted_vcpu to ensure the
loads and stores are atomic. In the extremely unlikely scenario the
compiler tears the stores, it's theoretically possible for KVM to attempt
to get a vCPU using an out-of-bounds index, e.g. if the write is split
into multiple 8-bit stores, and is paired with a 32-bit load on a VM with
257 vCPUs:
CPU0 CPU1
last_boosted_vcpu = 0xff;
(last_boosted_vcpu = 0x100)
last_boosted_vcpu[15:8] = 0x01;
i = (last_boosted_vcpu = 0x1ff)
last_boosted_vcpu[7:0] = 0x00;
vcpu = kvm->vcpu_array[0x1ff];
As detected by KCSAN:
BUG: KCSAN: data-race in kvm_vcpu_on_spin [kvm] / kvm_vcpu_on_spin [kvm]
write to 0xffffc90025a92344 of 4 bytes by task 4340 on cpu 16:
kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4112) kvm
handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel
vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:?
arch/x86/kvm/vmx/vmx.c:6606) kvm_intel
vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm
kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm
kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm
__se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890)
__x64_sys_ioctl (fs/ioctl.c:890)
x64_sys_call (arch/x86/entry/syscall_64.c:33)
do_syscall_64 (arch/x86/entry/common.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
read to 0xffffc90025a92344 of 4 bytes by task 4342 on cpu 4:
kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4069) kvm
handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel
vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:?
arch/x86/kvm/vmx/vmx.c:6606) kvm_intel
vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm
kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm
kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm
__se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890)
__x64_sys_ioctl (fs/ioctl.c:890)
x64_sys_call (arch/x86/entry/syscall_64.c:33)
do_syscall_64 (arch/x86/entry/common.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
value changed: 0x00000012 -> 0x00000000 |
