| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: ring-buffer: Fix to check event length before using
Check the event length before adding it for accessing next index in
rb_read_data_buffer(). Since this function is used for validating
possibly broken ring buffers, the length of the event could be broken.
In that case, the new event (e + len) can point a wrong address.
To avoid invalid memory access at boot, check whether the length of
each event is in the possible range before using it. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: serialize sequence allocation under concurrent TLB invalidations
With concurrent TLB invalidations, completion wait randomly gets timed out
because cmd_sem_val was incremented outside the IOMMU spinlock, allowing
CMD_COMPL_WAIT commands to be queued out of sequence and breaking the
ordering assumption in wait_on_sem().
Move the cmd_sem_val increment under iommu->lock so completion sequence
allocation is serialized with command queuing.
And remove the unnecessary return. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: ipmb: initialise event handler read bytes
IPMB doesn't use i2c reads, but the handler needs to set a value.
Otherwise an i2c read will return an uninitialised value from the bus
driver. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix sgtable leak on mapping failures
In an unlikely case when io_populate_area_dma() fails, which could only
happen on a PAGE_POOL_32BIT_ARCH_WITH_64BIT_DMA machine,
io_zcrx_map_area() will have an initialised and not freed table. It was
supposed to be cleaned up in the error path, but !is_mapped prevents
that. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix device cleanup order to prevent kernel panic
Move video device unregistration to the beginning of the remove function
to ensure all video operations are stopped before cleaning up the worker
thread and disabling PM runtime. This prevents hardware register access
after the device has been powered down.
In polling mode, the hrtimer periodically triggers
wave5_vpu_timer_callback() which queues work to the kthread worker.
The worker executes wave5_vpu_irq_work_fn() which reads hardware
registers via wave5_vdi_read_register().
The original cleanup order disabled PM runtime and powered down hardware
before unregistering video devices. When autosuspend triggers and powers
off the hardware, the video devices are still registered and the worker
thread can still be triggered by the hrtimer, causing it to attempt
reading registers from powered-off hardware. This results in a bus error
(synchronous external abort) and kernel panic.
This causes random kernel panics during encoding operations:
Internal error: synchronous external abort: 0000000096000010
[#1] PREEMPT SMP
Modules linked in: wave5 rpmsg_ctrl rpmsg_char ...
CPU: 0 UID: 0 PID: 1520 Comm: vpu_irq_thread
Tainted: G M W
pc : wave5_vdi_read_register+0x10/0x38 [wave5]
lr : wave5_vpu_irq_work_fn+0x28/0x60 [wave5]
Call trace:
wave5_vdi_read_register+0x10/0x38 [wave5]
kthread_worker_fn+0xd8/0x238
kthread+0x104/0x120
ret_from_fork+0x10/0x20
Code: aa1e03e9 d503201f f9416800 8b214000 (b9400000)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: synchronous external abort:
Fatal exception |
| Insufficient policy enforcement in Downloads in Google Chrome prior to 148.0.7778.96 allowed a local attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient policy enforcement in DevTools in Google Chrome prior to 148.0.7778.96 allowed an attacker who convinced a user to install a malicious extension to bypass navigation restrictions via a crafted Chrome Extension. (Chromium security severity: Medium) |
| Insufficient policy enforcement in WebUI in Google Chrome on Linux, Mac, Windows, ChromeOS prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in ServiceWorker in Google Chrome prior to 148.0.7778.96 allowed an attacker who convinced a user to install a malicious extension to inject arbitrary scripts or HTML (UXSS) via a crafted Chrome Extension. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Fix minimum RX size check for decryption
The check for the minimum receive buffer size did not take the
tag size into account during decryption. Fix this by adding the
required extra length. |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: check return value of con2fb_acquire_newinfo()
If fbcon_open() fails when called from con2fb_acquire_newinfo() then
info->fbcon_par pointer remains NULL which is later dereferenced.
Add check for return value of the function con2fb_acquire_newinfo() to
avoid it.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx23885: Add missing unmap in snd_cx23885_hw_params()
In error path, add cx23885_alsa_dma_unmap() to release the
resource acquired by cx23885_alsa_dma_map(). |
| In the Linux kernel, the following vulnerability has been resolved:
reset: gpio: suppress bind attributes in sysfs
This is a special device that's created dynamically and is supposed to
stay in memory forever. We also currently don't have a devlink between
it and the actual reset consumer. Suppress sysfs bind attributes so that
user-space can't unbind the device because - as of now - it will cause a
use-after-free splat from any user that puts the reset control handle. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: magicmouse: Do not crash on missing msc->input
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, msc->input stays NULL,
leading to a crash at a later time.
Detect this condition in the input_configured() hook and reject the device.
This is not supposed to happen with actual magic mouse devices, but can be
provoked by imposing as a magic mouse USB device. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: gen1: Destroy internal buffers after FW releases
After the firmware releases internal buffers, the driver was not
destroying them. This left stale allocations that were no longer used,
especially across resolution changes where new buffers are allocated per
the updated requirements. As a result, memory was wasted until session
close.
Destroy internal buffers once the release response is received from the
firmware. |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: core: Add locking around 'mfd_of_node_list'
Manipulating a list in the kernel isn't safe without some sort of
mutual exclusion. Add a mutex any time we access / modify
'mfd_of_node_list' to prevent possible crashes. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential kernel oops when probe fails
When probe of the sdio brcmfmac device fails for some reasons (i.e.
missing firmware), the sdiodev->bus is set to error instead of NULL, thus
the cleanup later in brcmf_sdio_remove() tries to free resources via
invalid bus pointer. This happens because sdiodev->bus is set 2 times:
first in brcmf_sdio_probe() and second time in brcmf_sdiod_probe(). Fix
this by chaning the brcmf_sdio_probe() function to return the error code
and set sdio->bus only there. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: imx_rproc: Fix invalid loaded resource table detection
imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded
resource table even when the current firmware does not provide one.
When the device tree contains a "rsc-table" entry, priv->rsc_table is
non-NULL and denotes where a resource table would be located if one is
present in memory. However, when the current firmware has no resource
table, rproc->table_ptr is NULL. The function still returns
priv->rsc_table, and the remoteproc core interprets this as a valid loaded
resource table.
Fix this by returning NULL from imx_rproc_elf_find_loaded_rsc_table() when
there is no resource table for the current firmware (i.e. when
rproc->table_ptr is NULL). This aligns the function's semantics with the
remoteproc core: a loaded resource table is only reported when a valid
table_ptr exists.
With this change, starting firmware without a resource table no longer
triggers a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: Add buffer to list only after successful allocation
Move `list_add_tail()` to after `dma_alloc_attrs()` succeeds when creating
internal buffers. Previously, the buffer was enqueued in `buffers->list`
before the DMA allocation. If the allocation failed, the function returned
`-ENOMEM` while leaving a partially initialized buffer in the list, which
could lead to inconsistent state and potential leaks.
By adding the buffer to the list only after `dma_alloc_attrs()` succeeds,
we ensure the list contains only valid, fully initialized buffers. |
| Inappropriate implementation in Companion in Google Chrome on Mac prior to 148.0.7778.96 allowed a remote attacker to perform OS-level privilege escalation via malicious network traffic. (Chromium security severity: Medium) |
