| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mshv: Fix infinite fault loop on permission-denied GPA intercepts
Prevent infinite fault loops when guests access memory regions without
proper permissions. Currently, mshv_handle_gpa_intercept() attempts to
remap pages for all faults on movable memory regions, regardless of
whether the access type is permitted. When a guest writes to a read-only
region, the remap succeeds but the region remains read-only, causing
immediate re-fault and spinning the vCPU indefinitely.
Validate intercept access type against region permissions before
attempting remaps. Reject writes to non-writable regions and executes to
non-executable regions early, returning false to let the VMM handle the
intercept appropriately.
This also closes a potential DoS vector where malicious guests could
intentionally trigger these fault loops to consume host resources. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lapbether: handle NETDEV_PRE_TYPE_CHANGE
lapbeth_data_transmit() expects the underlying device type
to be ARPHRD_ETHER.
Returning NOTIFY_BAD from lapbeth_device_event() makes sure
bonding driver can not break this expectation. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
The patch mentioned below changed cachefiles_bury_object() to expect 2
references to the 'rep' dentry. Three of the callers were changed to
use start_removing_dentry() which takes an extra reference so in those
cases the call gets the expected references.
However there is another call to cachefiles_bury_object() in
cachefiles_cull() which did not need to be changed to use
start_removing_dentry() and so was not properly considered.
It still passed the dentry with just one reference so the net result is
that a reference is lost.
To meet the expectations of cachefiles_bury_object(), cachefiles_cull()
must take an extra reference before the call. It will be dropped by
cachefiles_bury_object(). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda: Fix NULL pointer dereference
If there's a mismatch between the DAI links in the machine driver and
the topology, it is possible that the playback/capture widget is not
set, especially in the case of loopback capture for echo reference
where we use the dummy DAI link. Return the error when the widget is not
set to avoid a null pointer dereference like below when the topology is
broken.
RIP: 0010:hda_dai_get_ops.isra.0+0x14/0xa0 [snd_sof_intel_hda_common] |
| In the Linux kernel, the following vulnerability has been resolved:
net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean()
The priv->rx_buffer and priv->tx_buffer are alloc'd together as
contiguous buffers in uhdlc_init() but freed as two buffers in
uhdlc_memclean().
Change the cleanup to only call dma_free_coherent() once on the whole
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wan: farsync: Fix use-after-free bugs caused by unfinished tasklets
When the FarSync T-series card is being detached, the fst_card_info is
deallocated in fst_remove_one(). However, the fst_tx_task or fst_int_task
may still be running or pending, leading to use-after-free bugs when the
already freed fst_card_info is accessed in fst_process_tx_work_q() or
fst_process_int_work_q().
A typical race condition is depicted below:
CPU 0 (cleanup) | CPU 1 (tasklet)
| fst_start_xmit()
fst_remove_one() | tasklet_schedule()
unregister_hdlc_device()|
| fst_process_tx_work_q() //handler
kfree(card) //free | do_bottom_half_tx()
| card-> //use
The following KASAN trace was captured:
==================================================================
BUG: KASAN: slab-use-after-free in do_bottom_half_tx+0xb88/0xd00
Read of size 4 at addr ffff88800aad101c by task ksoftirqd/3/32
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcb/0x5d0
? do_bottom_half_tx+0xb88/0xd00
kasan_report+0xb8/0xf0
? do_bottom_half_tx+0xb88/0xd00
do_bottom_half_tx+0xb88/0xd00
? _raw_spin_lock_irqsave+0x85/0xe0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx___hrtimer_run_queues+0x10/0x10
fst_process_tx_work_q+0x67/0x90
tasklet_action_common+0x1fa/0x720
? hrtimer_interrupt+0x31f/0x780
handle_softirqs+0x176/0x530
__irq_exit_rcu+0xab/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
...
Allocated by task 41 on cpu 3 at 72.330843s:
kasan_save_stack+0x24/0x50
kasan_save_track+0x17/0x60
__kasan_kmalloc+0x7f/0x90
fst_add_one+0x1a5/0x1cd0
local_pci_probe+0xdd/0x190
pci_device_probe+0x341/0x480
really_probe+0x1c6/0x6a0
__driver_probe_device+0x248/0x310
driver_probe_device+0x48/0x210
__device_attach_driver+0x160/0x320
bus_for_each_drv+0x101/0x190
__device_attach+0x198/0x3a0
device_initial_probe+0x78/0xa0
pci_bus_add_device+0x81/0xc0
pci_bus_add_devices+0x7e/0x190
enable_slot+0x9b9/0x1130
acpiphp_check_bridge.part.0+0x2e1/0x460
acpiphp_hotplug_notify+0x36c/0x3c0
acpi_device_hotplug+0x203/0xb10
acpi_hotplug_work_fn+0x59/0x80
...
Freed by task 41 on cpu 1 at 75.138639s:
kasan_save_stack+0x24/0x50
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x135/0x410
fst_remove_one+0x2ca/0x540
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0x364/0x530
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device+0xd/0x20
disable_slot+0x116/0x260
acpiphp_disable_and_eject_slot+0x4b/0x190
acpiphp_hotplug_notify+0x230/0x3c0
acpi_device_hotplug+0x203/0xb10
acpi_hotplug_work_fn+0x59/0x80
...
The buggy address belongs to the object at ffff88800aad1000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 28 bytes inside of
freed 1024-byte region
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xaad0
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x100000000000040(head|node=0|zone=1)
page_type: f5(slab)
raw: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000
head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 0100000000000003 ffffea00002ab401 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88800aad0f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88800aad0f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88800aad1000: fa fb
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
team: avoid NETDEV_CHANGEMTU event when unregistering slave
syzbot is reporting
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3
ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_hold include/linux/netdevice.h:4429 [inline]
inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286
inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline]
netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886
netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907
dev_set_mtu+0x126/0x260 net/core/dev_api.c:248
team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333
team_del_slave drivers/net/team/team_core.c:1936 [inline]
team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2281 [inline]
call_netdevice_notifiers net/core/dev.c:2295 [inline]
__dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592
do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060
rtnl_changelink net/core/rtnetlink.c:3776 [inline]
__rtnl_newlink net/core/rtnetlink.c:3935 [inline]
rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
problem. Ido Schimmel found steps to reproduce
ip link add name team1 type team
ip link add name dummy1 mtu 1499 master team1 type dummy
ip netns add ns1
ip link set dev dummy1 netns ns1
ip -n ns1 link del dev dummy1
and also found that the same issue was fixed in the bond driver in
commit f51048c3e07b ("bonding: avoid NETDEV_CHANGEMTU event when
unregistering slave").
Let's do similar thing for the team driver, with commit ad7c7b2172c3 ("net:
hold netdev instance lock during sysfs operations") and commit 303a8487a657
("net: s/__dev_set_mtu/__netif_set_mtu/") also applied. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: Add missing platform data entries for SM8750
Two platform-data fields for SM8750 were missed:
- get_vpu_buffer_size = iris_vpu33_buf_size
Without this, the driver fails to allocate the required internal
buffers, leading to basic decode/encode failures during session
bring-up.
- max_core_mbps = ((7680 * 4320) / 256) * 60
Without this capability exposed, capability checks are incomplete and
v4l2-compliance for encoder fails. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Refactor amdgpu_gem_va_ioctl for Handling Last Fence Update and Timeline Management v4
This commit simplifies the amdgpu_gem_va_ioctl function, key updates
include:
- Moved the logic for managing the last update fence directly into
amdgpu_gem_va_update_vm.
- Introduced checks for the timeline point to enable conditional
replacement or addition of fences.
v2: Addressed review comments from Christian.
v3: Updated comments (Christian).
v4: The previous version selected the fence too early and did not manage its
reference correctly, which could lead to stale or freed fences being used.
This resulted in refcount underflows and could crash when updating GPU
timelines.
The fence is now chosen only after the VA mapping work is completed, and its
reference is taken safely. After exporting it to the VM timeline syncobj, the
driver always drops its local fence reference, ensuring balanced refcounting
and avoiding use-after-free on dma_fence.
Crash signature:
[ 205.828135] refcount_t: underflow; use-after-free.
[ 205.832963] WARNING: CPU: 30 PID: 7274 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
...
[ 206.074014] Call Trace:
[ 206.076488] <TASK>
[ 206.078608] amdgpu_gem_va_ioctl+0x6ea/0x740 [amdgpu]
[ 206.084040] ? __pfx_amdgpu_gem_va_ioctl+0x10/0x10 [amdgpu]
[ 206.089994] drm_ioctl_kernel+0x86/0xe0 [drm]
[ 206.094415] drm_ioctl+0x26e/0x520 [drm]
[ 206.098424] ? __pfx_amdgpu_gem_va_ioctl+0x10/0x10 [amdgpu]
[ 206.104402] amdgpu_drm_ioctl+0x4b/0x80 [amdgpu]
[ 206.109387] __x64_sys_ioctl+0x96/0xe0
[ 206.113156] do_syscall_64+0x66/0x2d0
...
[ 206.553351] BUG: unable to handle page fault for address: ffffffffc0dfde90
...
[ 206.553378] RIP: 0010:dma_fence_signal_timestamp_locked+0x39/0xe0
...
[ 206.553405] Call Trace:
[ 206.553409] <IRQ>
[ 206.553415] ? __pfx_drm_sched_fence_free_rcu+0x10/0x10 [gpu_sched]
[ 206.553424] dma_fence_signal+0x30/0x60
[ 206.553427] drm_sched_job_done.isra.0+0x123/0x150 [gpu_sched]
[ 206.553434] dma_fence_signal_timestamp_locked+0x6e/0xe0
[ 206.553437] dma_fence_signal+0x30/0x60
[ 206.553441] amdgpu_fence_process+0xd8/0x150 [amdgpu]
[ 206.553854] sdma_v4_0_process_trap_irq+0x97/0xb0 [amdgpu]
[ 206.554353] edac_mce_amd(E) ee1004(E)
[ 206.554270] amdgpu_irq_dispatch+0x150/0x230 [amdgpu]
[ 206.554702] amdgpu_ih_process+0x6a/0x180 [amdgpu]
[ 206.555101] amdgpu_irq_handler+0x23/0x60 [amdgpu]
[ 206.555500] __handle_irq_event_percpu+0x4a/0x1c0
[ 206.555506] handle_irq_event+0x38/0x80
[ 206.555509] handle_edge_irq+0x92/0x1e0
[ 206.555513] __common_interrupt+0x3e/0xb0
[ 206.555519] common_interrupt+0x80/0xa0
[ 206.555525] </IRQ>
[ 206.555527] <TASK>
...
[ 206.555650] RIP: 0010:dma_fence_signal_timestamp_locked+0x39/0xe0
...
[ 206.555667] Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kexec: add a sanity check on previous kernel's ima kexec buffer
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>", the physical range that contains the carried
over IMA measurement list may fall outside the truncated RAM leading to a
kernel panic.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) – not-present page
Other architectures already validate the range with page_is_ram(), as done
in commit cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer
against memory bounds") do a similar check on x86.
Without carrying the measurement list across kexec, the attestation
would fail. |
| In the Linux kernel, the following vulnerability has been resolved:
kcm: fix zero-frag skb in frag_list on partial sendmsg error
Syzkaller reported a warning in kcm_write_msgs() when processing a
message with a zero-fragment skb in the frag_list.
When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb,
it allocates a new skb (tskb) and links it into the frag_list before
copying data. If the copy subsequently fails (e.g. -EFAULT from
user memory), tskb remains in the frag_list with zero fragments:
head skb (msg being assembled, NOT yet in sk_write_queue)
+-----------+
| frags[17] | (MAX_SKB_FRAGS, all filled with data)
| frag_list-+--> tskb
+-----------+ +----------+
| frags[0] | (empty! copy failed before filling)
+----------+
For SOCK_SEQPACKET with partial data already copied, the error path
saves this message via partial_message for later completion. For
SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a
subsequent zero-length write(fd, NULL, 0) completes the message and
queues it to sk_write_queue. kcm_write_msgs() then walks the
frag_list and hits:
WARN_ON(!skb_shinfo(skb)->nr_frags)
TCP has a similar pattern where skbs are enqueued before data copy
and cleaned up on failure via tcp_remove_empty_skb(). KCM was
missing the equivalent cleanup.
Fix this by tracking the predecessor skb (frag_prev) when allocating
a new frag_list entry. On error, if the tail skb has zero frags,
use frag_prev to unlink and free it in O(1) without walking the
singly-linked frag_list. frag_prev is safe to dereference because
the entire message chain is only held locally (or in kcm->seq_skb)
and is not added to sk_write_queue until MSG_EOR, so the send path
cannot free it underneath us.
Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log
if the condition is somehow hit repeatedly.
There are currently no KCM selftests in the kernel tree; a simple
reproducer is available at [1].
[1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: move vdpa group bound check to vhost_vdpa
Remove duplication by consolidating these here. This reduces the
posibility of a parent driver missing them.
While we're at it, fix a bug in vdpa_sim where a valid ASID can be
assigned to a group equal to ngroups, causing an out of bound write. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()
The ChipIdea UDC driver can encounter "not page aligned sg buffer"
errors when a USB device is reconnected after being disconnected
during an active transfer. This occurs because _ep_nuke() returns
requests to the gadget layer without properly unmapping DMA buffers
or cleaning up scatter-gather bounce buffers.
Root cause:
When a disconnect happens during a multi-segment DMA transfer, the
request's num_mapped_sgs field and sgt.sgl pointer remain set with
stale values. The request is returned to the gadget driver with status
-ESHUTDOWN but still has active DMA state. If the gadget driver reuses
this request on reconnect without reinitializing it, the stale DMA
state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero
num_mapped_sgs) and attempt to use freed/invalid DMA addresses,
leading to alignment errors and potential memory corruption.
The normal completion path via _hardware_dequeue() properly calls
usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before
returning the request. The _ep_nuke() path must do the same cleanup
to ensure requests are returned in a clean, reusable state.
Fix:
Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror
the cleanup sequence in _hardware_dequeue():
- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set
- Call sglist_do_debounce() with copy=false if bounce buffer exists
This ensures that when requests are returned due to endpoint shutdown,
they don't retain stale DMA mappings. The 'false' parameter to
sglist_do_debounce() prevents copying data back (appropriate for
shutdown path where transfer was aborted). |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, there is an integer overflow in ImageChannel::resize that leads to heap OOB write via OpenEXRUtil public API. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-pl: handle probe errors
Errors in init must be reported back or we'll
follow a NULL pointer the first time FF is used. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable mode
PCIe endpoints with ATS enabled and passed through to userspace
(e.g., QEMU, DPDK) can hard-lock the host when their link drops,
either by surprise removal or by a link fault.
Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation
request when device is disconnected") adds pci_dev_is_disconnected()
to devtlb_invalidation_with_pasid() so ATS invalidation is skipped
only when the device is being safely removed, but it applies only
when Intel IOMMU scalable mode is enabled.
With scalable mode disabled or unsupported, a system hard-lock
occurs when a PCIe endpoint's link drops because the Intel IOMMU
waits indefinitely for an ATS invalidation that cannot complete.
Call Trace:
qi_submit_sync
qi_flush_dev_iotlb
__context_flush_dev_iotlb.part.0
domain_context_clear_one_cb
pci_for_each_dma_alias
device_block_translation
blocking_domain_attach_dev
iommu_deinit_device
__iommu_group_remove_device
iommu_release_device
iommu_bus_notifier
blocking_notifier_call_chain
bus_notify
device_del
pci_remove_bus_device
pci_stop_and_remove_bus_device
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist
Commit 81e921fd3216 ("iommu/vt-d: Fix NULL domain on device release")
adds intel_pasid_teardown_sm_context() to intel_iommu_release_device(),
which calls qi_flush_dev_iotlb() and can also hard-lock the system
when a PCIe endpoint's link drops.
Call Trace:
qi_submit_sync
qi_flush_dev_iotlb
__context_flush_dev_iotlb.part.0
intel_context_flush_no_pasid
device_pasid_table_teardown
pci_pasid_table_teardown
pci_for_each_dma_alias
intel_pasid_teardown_sm_context
intel_iommu_release_device
iommu_deinit_device
__iommu_group_remove_device
iommu_release_device
iommu_bus_notifier
blocking_notifier_call_chain
bus_notify
device_del
pci_remove_bus_device
pci_stop_and_remove_bus_device
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist
Sometimes the endpoint loses connection without a link-down event
(e.g., due to a link fault); killing the process (virsh destroy)
then hard-locks the host.
Call Trace:
qi_submit_sync
qi_flush_dev_iotlb
__context_flush_dev_iotlb.part.0
domain_context_clear_one_cb
pci_for_each_dma_alias
device_block_translation
blocking_domain_attach_dev
__iommu_attach_device
__iommu_device_set_domain
__iommu_group_set_domain_internal
iommu_detach_group
vfio_iommu_type1_detach_group
vfio_group_detach_container
vfio_group_fops_release
__fput
pci_dev_is_disconnected() only covers safe-removal paths;
pci_device_is_present() tests accessibility by reading
vendor/device IDs and internally calls pci_dev_is_disconnected().
On a ConnectX-5 (8 GT/s, x2) this costs ~70 µs.
Since __context_flush_dev_iotlb() is only called on
{attach,release}_dev paths (not hot), add pci_device_is_present()
there to skip inaccessible devices and avoid the hard-lock. |
| In the Linux kernel, the following vulnerability has been resolved:
md/bitmap: fix GPF in write_page caused by resize race
A General Protection Fault occurs in write_page() during array resize:
RIP: 0010:write_page+0x22b/0x3c0 [md_mod]
This is a use-after-free race between bitmap_daemon_work() and
__bitmap_resize(). The daemon iterates over `bitmap->storage.filemap`
without locking, while the resize path frees that storage via
md_bitmap_file_unmap(). `quiesce()` does not stop the md thread,
allowing concurrent access to freed pages.
Fix by holding `mddev->bitmap_info.mutex` during the bitmap update. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix 22000 series SMEM parsing
If the firmware were to report three LMACs (which doesn't
exist in hardware) then using "fwrt->smem_cfg.lmac[2]" is
an overrun of the array. Reject such and use IWL_FW_CHECK
instead of WARN_ON in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
The 9FGV0841 has 8 outputs and registers 8 struct clk_hw, make sure
there are 8 slots for those newly registered clk_hw pointers, else
there is going to be out of bounds write when pointers 4..7 are set
into struct rs9_driver_data .clk_dif[4..7] field.
Since there are other structure members past this struct clk_hw
pointer array, writing to .clk_dif[4..7] fields corrupts both
the struct rs9_driver_data content and data around it, sometimes
without crashing the kernel. However, the kernel does surely
crash when the driver is unbound or during suspend.
Fix this, increase the struct clk_hw pointer array size to the
maximum output count of 9FGV0841, which is the biggest chip that
is supported by this driver. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix incorrect early exits for invalid metabox-enabled images
Crafted EROFS images with metadata compression enabled can trigger
incorrect early returns, leading to folio reference leaks.
However, this does not cause system crashes or other severe issues. |
