| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: tcp - don't deref NULL sk_socket member after tcp_close()
When deleting a peer in case of keepalive expiration, the peer is
removed from the OpenVPN hashtable and is temporary inserted in a
"release list" for further processing.
This happens in:
ovpn_peer_keepalive_work()
unlock_ovpn(release_list)
This processing includes detaching from the socket being used to
talk to this peer, by restoring its original proto and socket
ops/callbacks.
In case of TCP it may happen that, while the peer is sitting in
the release list, userspace decides to close the socket.
This will result in a concurrent execution of:
tcp_close(sk)
__tcp_close(sk)
sock_orphan(sk)
sk_set_socket(sk, NULL)
The last function call will set sk->sk_socket to NULL.
When the releasing routine is resumed, ovpn_tcp_socket_detach()
will attempt to dereference sk->sk_socket to restore its original
ops member. This operation will crash due to sk->sk_socket being NULL.
Fix this race condition by testing-and-accessing
sk->sk_socket atomically under sk->sk_callback_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/rt: Skip currently executing CPU in rto_next_cpu()
CPU0 becomes overloaded when hosting a CPU-bound RT task, a non-CPU-bound
RT task, and a CFS task stuck in kernel space. When other CPUs switch from
RT to non-RT tasks, RT load balancing (LB) is triggered; with
HAVE_RT_PUSH_IPI enabled, they send IPIs to CPU0 to drive the execution
of rto_push_irq_work_func. During push_rt_task on CPU0,
if next_task->prio < rq->donor->prio, resched_curr() sets NEED_RESCHED
and after the push operation completes, CPU0 calls rto_next_cpu().
Since only CPU0 is overloaded in this scenario, rto_next_cpu() should
ideally return -1 (no further IPI needed).
However, multiple CPUs invoking tell_cpu_to_push() during LB increments
rd->rto_loop_next. Even when rd->rto_cpu is set to -1, the mismatch between
rd->rto_loop and rd->rto_loop_next forces rto_next_cpu() to restart its
search from -1. With CPU0 remaining overloaded (satisfying rt_nr_migratory
&& rt_nr_total > 1), it gets reselected, causing CPU0 to queue irq_work to
itself and send self-IPIs repeatedly. As long as CPU0 stays overloaded and
other CPUs run pull_rt_tasks(), it falls into an infinite self-IPI loop,
which triggers a CPU hardlockup due to continuous self-interrupts.
The trigging scenario is as follows:
cpu0 cpu1 cpu2
pull_rt_task
tell_cpu_to_push
<------------irq_work_queue_on
rto_push_irq_work_func
push_rt_task
resched_curr(rq) pull_rt_task
rto_next_cpu tell_cpu_to_push
<-------------------------- atomic_inc(rto_loop_next)
rd->rto_loop != next
rto_next_cpu
irq_work_queue_on
rto_push_irq_work_func
Fix redundant self-IPI by filtering the initiating CPU in rto_next_cpu().
This solution has been verified to effectively eliminate spurious self-IPIs
and prevent CPU hardlockup scenarios. |
| A security vulnerability has been detected in TeamSpeak 3 Server up to 3.13.7. This vulnerability affects unknown code of the component ECC Key Parser. Such manipulation leads to heap-based buffer overflow. The attack may be launched remotely. Upgrading to version 3.13.8 is able to resolve this issue. It is suggested to upgrade the affected component. |
| FileRise is a self-hosted web-based file manager with multi-file upload, editing, and batch operations. Prior to 3.12.0, /api/totp_setup.php is callable from a session that has only passed the password check (state pending_login_user). When the target account already has TOTP configured, the endpoint decrypts and returns the user's existing TOTP secret inside the QR PNG instead of refusing or generating a new secret. An attacker who already possesses the victim's password can therefore retrieve the live TOTP secret, derive a valid one-time code, submit it to /api/totp_verify.php, and obtain a fully authenticated session without ever possessing the victim's authenticator device. This vulnerability is fixed in 3.12.0. |
| bird-lg-go is a BIRD looking glass in Go. Prior to 1.4.5, the apiHandler (and similarly webHandlerTelegramBot) processes user-provided JSON payloads by directly using json.NewDecoder(r.Body).Decode(&request) without restricting the maximum read size. An unauthenticated remote attacker can stream an extremely large, endless JSON payload (e.g., several Gigabytes of padding) over a single TCP connection. Because Go's JSON decoder attempts to allocate memory for the entire parsed structure, this rapidly exhausts the host's physical RAM or container limits, leading to an unrecoverable fatal error: runtime: out of memory. This vulnerability is fixed in 1.4.5. |
| Botan is a C++ cryptography library. Prior to 3.12.0, certain patterns of indefinite length encodings in BER data could cause quadratic behavior in the parser, resulting in a denial of service. Such BER encodings were accepted even in structures which are required to be encoded as DER, which prohibits indefinite length encodings. This vulnerability is fixed in 3.12.0. |
| The kbdint_next_device function in auth2-chall.c in sshd in OpenSSH through 6.9 does not properly restrict the processing of keyboard-interactive devices within a single connection, which makes it easier for remote attackers to conduct brute-force attacks or cause a denial of service (CPU consumption) via a long and duplicative list in the ssh -oKbdInteractiveDevices option, as demonstrated by a modified client that provides a different password for each pam element on this list. |
| go-ipld-prime is an implementation of the InterPlanetary Linked Data (IPLD) spec interfaces, a batteries-included codec implementations of IPLD for CBOR and JSON, and tooling for basic operations on IPLD objects. Prior to 0.23.0, the DAG-CBOR and DAG-JSON decoders recurse on each nested map or list without a depth limit. A payload containing deeply nested collections causes the decoder to recurse once per level, growing the goroutine stack until the Go runtime terminates the process with a fatal stack overflow (distinct from a recoverable panic). This vulnerability is fixed in 0.23.0. |
| IBM InfoSphere Optim Test Data Fabrication 1.0.0, 1.0.0.1, 1.0.0.2, 1.0.2, 1.0.2.2, 1.0.2.3, 1.0.2.4, 1.0.2.5, 1.0.2.6, 1.0.2.7 could allow a remote attacker to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system |
| The RC4 algorithm, as used in the TLS protocol and SSL protocol, does not properly combine state data with key data during the initialization phase, which makes it easier for remote attackers to conduct plaintext-recovery attacks against the initial bytes of a stream by sniffing network traffic that occasionally relies on keys affected by the Invariance Weakness, and then using a brute-force approach involving LSB values, aka the "Bar Mitzvah" issue. |
| A weakness has been identified in TeamSpeak 3 Server up to 3.13.7. This affects the function process_resend_queue of the component Connection State Management. This manipulation causes use after free. The attack may be initiated remotely. Upgrading to version 3.13.8 is able to mitigate this issue. The affected component should be upgraded. |
| A NULL pointer dereference in GPAC MP4Box: when parsing certain truncated MP4 files, an unknown/invalid stsd entry can result in missing descriptor fields (e.g., codec/mime/profile strings). gf_media_map_esd then calls strlen() on a NULL pointer, triggering a crash (ASan SEGV). |
| In the Linux kernel, the following vulnerability has been resolved:
mctp i2c: initialise event handler read bytes
Set a 0xff value for i2c reads of an mctp-i2c device. Otherwise reads
will return "val" from the i2c bus driver. For i2c-aspeed and
i2c-npcm7xx that is a stack uninitialised u8.
Tested with "i2ctransfer -y 1 r10@0x34" where 0x34 is a mctp-i2c
instance, now it returns all 0xff. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: caif: fix use-after-free in caif_serial ldisc_close()
There is a use-after-free bug in caif_serial where handle_tx() may
access ser->tty after the tty has been freed.
The race condition occurs between ldisc_close() and packet transmission:
CPU 0 (close) CPU 1 (xmit)
------------- ------------
ldisc_close()
tty_kref_put(ser->tty)
[tty may be freed here]
<-- race window -->
caif_xmit()
handle_tx()
tty = ser->tty // dangling ptr
tty->ops->write() // UAF!
schedule_work()
ser_release()
unregister_netdevice()
The root cause is that tty_kref_put() is called in ldisc_close() while
the network device is still active and can receive packets.
Since ser and tty have a 1:1 binding relationship with consistent
lifecycles (ser is allocated in ldisc_open and freed in ser_release
via unregister_netdevice, and each ser binds exactly one tty), we can
safely defer the tty reference release to ser_release() where the
network device is unregistered.
Fix this by moving tty_kref_put() from ldisc_close() to ser_release(),
after unregister_netdevice(). This ensures the tty reference is held
as long as the network device exists, preventing the UAF.
Note: We save ser->tty before unregister_netdevice() because ser is
embedded in netdev's private data and will be freed along with netdev
(needs_free_netdev = true).
How to reproduce: Add mdelay(500) at the beginning of ldisc_close()
to widen the race window, then run the reproducer program [1].
Note: There is a separate deadloop issue in handle_tx() when using
PORT_UNKNOWN serial ports (e.g., /dev/ttyS3 in QEMU without proper
serial backend). This deadloop exists even without this patch,
and is likely caused by inconsistency between uart_write_room() and
uart_write() in serial core. It has been addressed in a separate
patch [2].
KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in handle_tx+0x5d1/0x620
Read of size 1 at addr ffff8881131e1490 by task caif_uaf_trigge/9929
Call Trace:
<TASK>
dump_stack_lvl+0x10e/0x1f0
print_report+0xd0/0x630
kasan_report+0xe4/0x120
handle_tx+0x5d1/0x620
dev_hard_start_xmit+0x9d/0x6c0
__dev_queue_xmit+0x6e2/0x4410
packet_xmit+0x243/0x360
packet_sendmsg+0x26cf/0x5500
__sys_sendto+0x4a3/0x520
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0xc9/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f615df2c0d7
Allocated by task 9930:
Freed by task 64:
Last potentially related work creation:
The buggy address belongs to the object at ffff8881131e1000
which belongs to the cache kmalloc-cg-2k of size 2048
The buggy address is located 1168 bytes inside of
freed 2048-byte region [ffff8881131e1000, ffff8881131e1800)
The buggy address belongs to the physical page:
page_owner tracks the page as allocated
page last free pid 9778 tgid 9778 stack trace:
Memory state around the buggy address:
ffff8881131e1380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131e1400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881131e1480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881131e1500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131e1580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
[1]: https://gist.github.com/mrpre/f683f244544f7b11e7fa87df9e6c2eeb
[2]: https://lore.kernel.org/linux-serial/20260204074327.226165-1-jiayuan.chen@linux.dev/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
phy: freescale: imx8qm-hsio: fix NULL pointer dereference
During the probe the refclk_pad pointer is set to NULL if the
'fsl,refclk-pad-mode' property is not defined in the devicetree node. But
in imx_hsio_configure_clk_pad() this pointer is unconditionally used which
could result in a NULL pointer dereference. So check the pointer before to
use it. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: sca3000: Fix a resource leak in sca3000_probe()
spi->irq from request_threaded_irq() not released when
iio_device_register() fails. Add an return value check and jump to a
common error handler when iio_device_register() fails. |
| Webmin before 2.640 does not safely construct a filename for saving of an attachment within the mailboxes component. This occurs in mailboxes/detachall.cgi. |
| Agent Zero before version 1.15 contains a stored cross-site scripting vulnerability that allows attackers to execute arbitrary JavaScript in the application origin by serving SVG files through the image_get API endpoint without Content-Security-Policy, X-Content-Type-Options, or Content-Disposition headers. Attackers can place a crafted SVG file containing script tags in any path readable by the agent-zero process and lure an authenticated user to the image_get endpoint, causing the browser to execute the malicious script, steal the csrf_token cookie, and perform unauthorized API calls on behalf of the victim. |
| A stored cross-site scripting (XSS) vulnerability in the /admin/config-module.php component of creatorsofcode simplephp GitHub commit 5184cff (Latest as of 2026-02-27) via injecting a crafted payload. |
| OpenRapid RapidCMS v1.3.1 was discovered to contain an authentication bypass in the /template/default/menu.php component. This vulnerability is exploited via injecting a crafted SQL payload into the name cookie parameter. |
