| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: designware: amdisp: Fix resume-probe race condition issue
Identified resume-probe race condition in kernel v7.0 with the commit
38fa29b01a6a ("i2c: designware: Combine the init functions"),but this
issue existed from the beginning though not detected.
The amdisp i2c device requires ISP to be in power-on state for probe
to succeed. To meet this requirement, this device is added to genpd
to control ISP power using runtime PM. The pm_runtime_get_sync() called
before i2c_dw_probe() triggers PM resume, which powers on ISP and also
invokes the amdisp i2c runtime resume before the probe completes resulting
in this race condition and a NULL dereferencing issue in v7.0
Fix this race condition by using the genpd APIs directly during probe:
- Call dev_pm_genpd_resume() to Power ON ISP before probe
- Call dev_pm_genpd_suspend() to Power OFF ISP after probe
- Set the device to suspended state with pm_runtime_set_suspended()
- Enable runtime PM only after the device is fully initialized |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Unlink NV12 planes earlier
unlink_nv12_plane() will clobber parts of the plane state
potentially already set up by plane_atomic_check(), so we
must make sure not to call the two in the wrong order.
The problem happens when a plane previously selected as
a Y plane is now configured as a normal plane by user space.
plane_atomic_check() will first compute the proper plane
state based on the userspace request, and unlink_nv12_plane()
later clears some of the state.
This used to work on account of unlink_nv12_plane() skipping
the state clearing based on the plane visibility. But I removed
that check, thinking it was an impossible situation. Now when
that situation happens unlink_nv12_plane() will just WARN
and proceed to clobber the state.
Rather than reverting to the old way of doing things, I think
it's more clear if we unlink the NV12 planes before we even
compute the new plane state.
(cherry picked from commit 017ecd04985573eeeb0745fa2c23896fb22ee0cc) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: dsi: Store driver data before invoking mipi_dsi_host_register
The call to mipi_dsi_host_register triggers a callback to mtk_dsi_bind,
which uses dev_get_drvdata to retrieve the mtk_dsi struct, so this
structure needs to be stored inside the driver data before invoking it.
As drvdata is currently uninitialized it leads to a crash when
registering the DSI DRM encoder right after acquiring
the mode_config.idr_mutex, blocking all subsequent DRM operations.
Fixes the following crash during mediatek-drm probe (tested on Xiaomi
Smart Clock x04g):
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000040
[...]
Modules linked in: mediatek_drm(+) drm_display_helper cec drm_client_lib
drm_dma_helper drm_kms_helper panel_simple
[...]
Call trace:
drm_mode_object_add+0x58/0x98 (P)
__drm_encoder_init+0x48/0x140
drm_encoder_init+0x6c/0xa0
drm_simple_encoder_init+0x20/0x34 [drm_kms_helper]
mtk_dsi_bind+0x34/0x13c [mediatek_drm]
component_bind_all+0x120/0x280
mtk_drm_bind+0x284/0x67c [mediatek_drm]
try_to_bring_up_aggregate_device+0x23c/0x320
__component_add+0xa4/0x198
component_add+0x14/0x20
mtk_dsi_host_attach+0x78/0x100 [mediatek_drm]
mipi_dsi_attach+0x2c/0x50
panel_simple_dsi_probe+0x4c/0x9c [panel_simple]
mipi_dsi_drv_probe+0x1c/0x28
really_probe+0xc0/0x3dc
__driver_probe_device+0x80/0x160
driver_probe_device+0x40/0x120
__device_attach_driver+0xbc/0x17c
bus_for_each_drv+0x88/0xf0
__device_attach+0x9c/0x1cc
device_initial_probe+0x54/0x60
bus_probe_device+0x34/0xa0
device_add+0x5b0/0x800
mipi_dsi_device_register_full+0xdc/0x16c
mipi_dsi_host_register+0xc4/0x17c
mtk_dsi_probe+0x10c/0x260 [mediatek_drm]
platform_probe+0x5c/0xa4
really_probe+0xc0/0x3dc
__driver_probe_device+0x80/0x160
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1f8
bus_for_each_dev+0x7c/0xe0
driver_attach+0x24/0x30
bus_add_driver+0x11c/0x240
driver_register+0x68/0x130
__platform_register_drivers+0x64/0x160
mtk_drm_init+0x24/0x1000 [mediatek_drm]
do_one_initcall+0x60/0x1d0
do_init_module+0x54/0x240
load_module+0x1838/0x1dc0
init_module_from_file+0xd8/0xf0
__arm64_sys_finit_module+0x1b4/0x428
invoke_syscall.constprop.0+0x48/0xc8
do_el0_svc+0x3c/0xb8
el0_svc+0x34/0xe8
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800022 941004ab 2a0003f3 37f80040 (29005a80) |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix use-after-free on disconnect
The vub300 driver maintains an explicit reference count for the
controller and its driver data and the last reference can in theory be
dropped after the driver has been unbound.
This specifically means that the controller allocation must not be
device managed as that can lead to use-after-free.
Note that the lifetime is currently also incorrectly tied the parent USB
device rather than interface, which can lead to memory leaks if the
driver is unbound without its device being physically disconnected (e.g.
on probe deferral).
Fix both issues by reverting to non-managed allocation of the controller. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: fix nr_pages calculation overflow in filemap_map_pages()
When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I
encountered some very strange crash issues showing up as "Bad page state":
"
[ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb
[ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb
[ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff)
[ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000
[ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000
[ 734.496442] page dumped because: nonzero mapcount
"
After analyzing this page’s state, it is hard to understand why the
mapcount is not 0 while the refcount is 0, since this page is not where
the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can
reproduce the crash as well and captured the first warning where the issue
appears:
"
[ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0
[ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 734.469315] memcg:ffff000807a8ec00
[ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540"
[ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff)
......
[ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1),
const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *:
(struct folio *)_compound_head(page + nr_pages - 1))) != folio)
[ 734.469390] ------------[ cut here ]------------
[ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468,
CPU#90: stress-ng-mlock/9430
[ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P)
[ 734.469555] set_pte_range+0xd8/0x2f8
[ 734.469566] filemap_map_folio_range+0x190/0x400
[ 734.469579] filemap_map_pages+0x348/0x638
[ 734.469583] do_fault_around+0x140/0x198
......
[ 734.469640] el0t_64_sync+0x184/0x188
"
The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page +
nr_pages - 1) != folio, folio)", which indicates that set_pte_range()
tried to map beyond the large folio’s size.
By adding more debug information, I found that 'nr_pages' had overflowed
in filemap_map_pages(), causing set_pte_range() to establish mappings for
a range exceeding the folio size, potentially corrupting fields of pages
that do not belong to this folio (e.g., page->_mapcount).
After above analysis, I think the possible race is as follows:
CPU 0 CPU 1
filemap_map_pages() ext4_setattr()
//get and lock folio with old inode->i_size
next_uptodate_folio()
.......
//shrink the inode->i_size
i_size_write(inode, attr->ia_size);
//calculate the end_pgoff with the new inode->i_size
file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1;
end_pgoff = min(end_pgoff, file_end);
......
//nr_pages can be overflowed, cause xas.xa_index > end_pgoff
end = folio_next_index(folio) - 1;
nr_pages = min(end, end_pgoff) - xas.xa_index + 1;
......
//map large folio
filemap_map_folio_range()
......
//truncate folios
truncate_pagecache(inode, inode->i_size);
To fix this issue, move the 'end_pgoff' calculation before
next_uptodate_folio(), so the retrieved folio stays consistent with the
file end to avoid
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix key parsing memleak
In rxrpc_preparse_xdr_yfs_rxgk(), the memory attached to token->rxgk can be
leaked in a few error paths after it's allocated.
Fix this by freeing it in the "reject_token:" case. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix integer overflow in rxgk_verify_response()
In rxgk_verify_response(), there's a potential integer overflow due to
rounding up token_len before checking it, thereby allowing the length check to
be bypassed.
Fix this by checking the unrounded value against len too (len is limited as
the response must fit in a single UDP packet). |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix leak of rxgk context in rxgk_verify_response()
Fix rxgk_verify_response() to clean up the rxgk context it creates. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Handle the case that EIOINTC's coremap is empty
EIOINTC's coremap in eiointc_update_sw_coremap() can be empty, currently
we get a cpuid with -1 in this case, but we actually need 0 because it's
similar as the case that cpuid >= 4.
This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[]. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/mm: Add missing secure storage access fixups for donated memory
There are special cases where secure storage access exceptions happen
in a kernel context for pages that don't have the PG_arch_1 bit
set. That bit is set for non-exported guest secure storage (memory)
but is absent on storage donated to the Ultravisor since the kernel
isn't allowed to export donated pages.
Prior to this patch we would try to export the page by calling
arch_make_folio_accessible() which would instantly return since the
arch bit is absent signifying that the page was already exported and
no further action is necessary. This leads to secure storage access
exception loops which can never be resolved.
With this patch we unconditionally try to export and if that fails we
fixup. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix fence put before wait in amdgpu_amdkfd_submit_ib
amdgpu_amdkfd_submit_ib() submits a GPU job and gets a fence
from amdgpu_ib_schedule(). This fence is used to wait for job
completion.
Currently, the code drops the fence reference using dma_fence_put()
before calling dma_fence_wait().
If dma_fence_put() releases the last reference, the fence may be
freed before dma_fence_wait() is called. This can lead to a
use-after-free.
Fix this by waiting on the fence first and releasing the reference
only after dma_fence_wait() completes.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:697 amdgpu_amdkfd_submit_ib() warn: passing freed memory 'f' (line 696)
(cherry picked from commit 8b9e5259adc385b61a6590a13b82ae0ac2bd3482) |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix deadlock during netdev reset with active connections
Resolve deadlock that occurs when user executes netdev reset while RDMA
applications (e.g., rping) are active. The netdev reset causes ice
driver to remove irdma auxiliary driver, triggering device_delete and
subsequent client removal. During client removal, uverbs_client waits
for QP reference count to reach zero while cma_client holds the final
reference, creating circular dependency and indefinite wait in iWARP
mode. Skip QP reference count wait during device reset to prevent
deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Fix base address calculation in kvm_eiointc_regs_access()
In function kvm_eiointc_regs_access(), the register base address is
caculated from array base address plus offset, the offset is absolute
value from the base address. The data type of array base address is
u64, it should be converted into the "void *" type and then plus the
offset. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/cpu: Remove X86_CR4_FRED from the CR4 pinned bits mask
Commit in Fixes added the FRED CR4 bit to the CR4 pinned bits mask so
that whenever something else modifies CR4, that bit remains set. Which
in itself is a perfectly fine idea.
However, there's an issue when during boot FRED is initialized: first on
the BSP and later on the APs. Thus, there's a window in time when
exceptions cannot be handled.
This becomes particularly nasty when running as SEV-{ES,SNP} or TDX
guests which, when they manage to trigger exceptions during that short
window described above, triple fault due to FRED MSRs not being set up
yet.
See Link tag below for a much more detailed explanation of the
situation.
So, as a result, the commit in that Link URL tried to address this
shortcoming by temporarily disabling CR4 pinning when an AP is not
online yet.
However, that is a problem in itself because in this case, an attack on
the kernel needs to only modify the online bit - a single bit in RW
memory - and then disable CR4 pinning and then disable SM*P, leading to
more and worse things to happen to the system.
So, instead, remove the FRED bit from the CR4 pinning mask, thus
obviating the need to temporarily disable CR4 pinning.
If someone manages to disable FRED when poking at CR4, then
idt_invalidate() would make sure the system would crash'n'burn on the
first exception triggered, which is a much better outcome security-wise. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Make kvm_get_vcpu_by_cpuid() more robust
kvm_get_vcpu_by_cpuid() takes a cpuid parameter whose type is int, so
cpuid can be negative. Let kvm_get_vcpu_by_cpuid() return NULL for this
case so as to make it more robust.
This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[]. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: scrub: unlock dquot before early return in quota scrub
xchk_quota_item can return early after calling xchk_fblock_process_error.
When that helper returns false, the function returned immediately without
dropping dq->q_qlock, which can leave the dquot lock held and risk lock
leaks or deadlocks in later quota operations.
Fix this by unlocking dq->q_qlock before the early return. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Require sys_futex_requeue() to have identical flags
Nicholas reported that his LLM found it was possible to create a UaF
when sys_futex_requeue() is used with different flags. The initial
motivation for allowing different flags was the variable sized futex,
but since that hasn't been merged (yet), simply mandate the flags are
identical, as is the case for the old style sys_futex() requeue
operations. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix the descriptor address in __kvm_at_swap_desc()
Using "(u64 __user *)hva + offset" to get the virtual addresses of S1/S2
descriptors looks really wrong, if offset is not zero. What we want to get
for swapping is hva + offset, not hva + offset*8. ;-)
Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: Fix static_branch_dec() underflow for aql_disable.
syzbot reported static_branch_dec() underflow in aql_enable_write(). [0]
The problem is that aql_enable_write() does not serialise concurrent
write()s to the debugfs.
aql_enable_write() checks static_key_false(&aql_disable.key) and
later calls static_branch_inc() or static_branch_dec(), but the
state may change between the two calls.
aql_disable does not need to track inc/dec.
Let's use static_branch_enable() and static_branch_disable().
[0]:
val == 0
WARNING: kernel/jump_label.c:311 at __static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311, CPU#0: syz.1.3155/20288
Modules linked in:
CPU: 0 UID: 0 PID: 20288 Comm: syz.1.3155 Tainted: G U L syzkaller #0 PREEMPT(full)
Tainted: [U]=USER, [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026
RIP: 0010:__static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311
Code: f2 c9 ff 5b 5d c3 cc cc cc cc e8 54 f2 c9 ff 48 89 df e8 ac f9 ff ff eb ad e8 45 f2 c9 ff 90 0f 0b 90 eb a2 e8 3a f2 c9 ff 90 <0f> 0b 90 eb 97 48 89 df e8 5c 4b 33 00 e9 36 ff ff ff 0f 1f 80 00
RSP: 0018:ffffc9000b9f7c10 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffffffff9b3e5d40 RCX: ffffffff823c57b4
RDX: ffff8880285a0000 RSI: ffffffff823c5846 RDI: ffff8880285a0000
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000000a
R13: 1ffff9200173ef88 R14: 0000000000000001 R15: ffffc9000b9f7e98
FS: 00007f530dd726c0(0000) GS:ffff8881245e3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000001140 CR3: 000000007cc4a000 CR4: 00000000003526f0
Call Trace:
<TASK>
__static_key_slow_dec_cpuslocked kernel/jump_label.c:297 [inline]
__static_key_slow_dec kernel/jump_label.c:321 [inline]
static_key_slow_dec+0x7c/0xc0 kernel/jump_label.c:336
aql_enable_write+0x2b2/0x310 net/mac80211/debugfs.c:343
short_proxy_write+0x133/0x1a0 fs/debugfs/file.c:383
vfs_write+0x2aa/0x1070 fs/read_write.c:684
ksys_pwrite64 fs/read_write.c:793 [inline]
__do_sys_pwrite64 fs/read_write.c:801 [inline]
__se_sys_pwrite64 fs/read_write.c:798 [inline]
__x64_sys_pwrite64+0x1eb/0x250 fs/read_write.c:798
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xc9/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f530cf9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f530dd72028 EFLAGS: 00000246 ORIG_RAX: 0000000000000012
RAX: ffffffffffffffda RBX: 00007f530d215fa0 RCX: 00007f530cf9aeb9
RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000010
RBP: 00007f530d008c1f R08: 0000000000000000 R09: 0000000000000000
R10: 4200000000000005 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f530d216038 R14: 00007f530d215fa0 R15: 00007ffde89fb978
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix missing runtime PM reference in ccs_mode_store
ccs_mode_store() calls xe_gt_reset() which internally invokes
xe_pm_runtime_get_noresume(). That function requires the caller
to already hold an outer runtime PM reference and warns if none
is held:
[46.891177] xe 0000:03:00.0: [drm] Missing outer runtime PM protection
[46.891178] WARNING: drivers/gpu/drm/xe/xe_pm.c:885 at
xe_pm_runtime_get_noresume+0x8b/0xc0
Fix this by protecting xe_gt_reset() with the scope-based
guard(xe_pm_runtime)(xe), which is the preferred form when
the reference lifetime matches a single scope.
v2:
- Use scope-based guard(xe_pm_runtime)(xe) (Shuicheng)
- Update commit message accordingly
(cherry picked from commit 7937ea733f79b3f25e802a0c8360bf7423856f36) |
