| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| libjbig2dec.a in Artifex jbig2dec 0.13, as used in MuPDF and Ghostscript, has a NULL pointer dereference in the jbig2_huffman_get function in jbig2_huffman.c. For example, the jbig2dec utility will crash (segmentation fault) when parsing an invalid file. |
| A vulnerability in the TCP throttling process for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to cause the system to consume additional memory, eventually forcing the device to restart, aka Memory Exhaustion. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP packets to a specific group of open listening ports on a targeted device. An exploit could allow the attacker to cause the system to consume additional memory. If enough available memory is consumed, the system will restart, creating a temporary denial of service (DoS) condition. The DoS condition will end after the device has finished the restart process. This vulnerability affects the following Cisco products: Connected Grid Network Management System, if running a software release prior to IoT-FND Release 4.0; IoT Field Network Director, if running a software release prior to IoT-FND Release 4.0. Cisco Bug IDs: CSCvc77164. |
| fedora-arm-installer up to and including 1.99.16 is vulnerable to local privilege escalation due to lack of checking the error condition of mount operation failure on unsafely created temporary directories. |
| A vulnerability in the TCP throttling process for the GUI of the Cisco Identity Services Engine (ISE) 2.1(0.474) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device where the ISE GUI may fail to respond to new or established connection requests. The vulnerability is due to insufficient TCP rate limiting protection on the GUI. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP connections to the GUI. An exploit could allow the attacker to cause the GUI to stop responding while the high rate of connections is in progress. Cisco Bug IDs: CSCvc81803. |
| A vulnerability in the Session Initiation Protocol (SIP) of the Cisco TelePresence Codec (TC) and Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause a TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms within the software. An attacker could exploit this vulnerability by sending a flood of SIP INVITE packets to the affected device. An exploit could allow the attacker to impact the availability of services and data of the device, including a complete DoS condition. This vulnerability affects the following Cisco TC and CE platforms when running software versions prior to TC 7.3.8 and CE 8.3.0. Cisco Bug IDs: CSCux94002. |
| A vulnerability in the ingress UDP packet processing functionality of Cisco Virtualized Packet Core-Distributed Instance (VPC-DI) Software 19.2 through 21.0 could allow an unauthenticated, remote attacker to cause both control function (CF) instances on an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient handling of user-supplied data by the affected software. An attacker could exploit this vulnerability by sending crafted UDP packets to the distributed instance (DI) network addresses of both CF instances on an affected system. A successful exploit could allow the attacker to cause an unhandled error condition on the affected system, which would cause the CF instances to reload and consequently cause the entire VPC to reload, resulting in the disconnection of all subscribers and a DoS condition on the affected system. This vulnerability can be exploited via IPv4 traffic only. Cisco Bug IDs: CSCvc01665 CSCvc35565. |
| A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072. |
| A vulnerability in the TCP connection handling functionality of Cisco Remote Expert Manager Software 11.0.0 could allow an unauthenticated, remote attacker to disable TCP ports and cause a denial of service (DoS) condition on an affected system. The vulnerability is due to a lack of rate-limiting functionality in the TCP Listen application of the affected software. An attacker could exploit this vulnerability by sending a crafted TCP traffic stream in which specific types of TCP packets are flooded to an affected device, for example a TCP packet stream in which the TCP FIN bit is set in all the TCP packets. A successful exploit could allow the attacker to cause certain TCP listening ports on the affected system to stop accepting incoming connections for a period of time or until the affected device is restarted, resulting in a DoS condition. In addition, system resources, such as CPU and memory, could be exhausted during the attack. Cisco Bug IDs: CSCva29806. |
| A "Cisco Firepower Threat Defense 6.0.0 through 6.2.2 and Cisco ASA with FirePOWER Module Denial of Service" vulnerability in the access control policy of Cisco Firepower System Software could allow an authenticated, remote attacker to cause an affected system to stop inspecting and processing packets, resulting in a denial of service (DoS) condition. The vulnerability is due to improper SSL policy handling by the affected software when packets are passed through the sensing interfaces of an affected system. An attacker could exploit this vulnerability by sending crafted packets through a targeted system. This vulnerability affects Cisco Firepower System Software that is configured with the SSL policy feature. Cisco Bug IDs: CSCvc84361. |
| A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243. |
| A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685. |
| The parse_string_node function in bplist.c in libimobiledevice libplist 1.12 allows local users to cause a denial of service (memory corruption) via a crafted plist file. |
| A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078. |
| A vulnerability in the DNS code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause an affected device to reload or corrupt the information present in the device's local DNS cache. The vulnerability is due to a flaw in handling crafted DNS response messages. An attacker could exploit this vulnerability by triggering a DNS request from the Cisco ASA Software and replying with a crafted response. A successful exploit could cause the device to reload, resulting in a denial of service (DoS) condition or corruption of the local DNS cache information. Note: Only traffic directed to the affected device can be used to exploit this vulnerability. This vulnerability affects Cisco ASA Software configured in routed or transparent firewall mode and single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.12) 9.2(4.18) 9.4(3.12) 9.5(3.2) 9.6(2.2). Cisco Bug IDs: CSCvb40898. |
| A vulnerability in SMART-SSL Accelerator functionality for Cisco Wide Area Application Services (WAAS) 6.2.1, 6.2.1a, and 6.2.3a could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition where the WAN optimization could stop functioning while the process restarts. The vulnerability is due to a Secure Sockets Layer/Transport Layer Security (SSL/TLS) alert being incorrectly handled when in a specific SSL/TLS connection state. An attacker could exploit this vulnerability by establishing a SMART-SSL connection through the targeted device. The attacker would then send a crafted stream of SSL/TLS traffic. An exploit could allow the attacker to cause a DoS condition where WAN optimization could stop processing traffic for a short period of time. Cisco Bug IDs: CSCvb71133. |
| A vulnerability in the Akamai Connect feature of Cisco Wide Area Application Services (WAAS) Appliances could allow an unauthenticated, remote attacker to cause a denial-of-service (DoS) condition on an affected device. The vulnerability is due to certain file-handling inefficiencies of the affected system. An attacker could exploit this vulnerability by directing client systems to access a corrupted file that the client systems cannot decompress correctly. A successful exploit could allow the attacker to cause the affected device to crash or hang unexpectedly and result in a DoS condition that may require manual intervention to regain normal operating conditions. Cisco Bug IDs: CSCve82472. |
| A vulnerability in SSL traffic decryption for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause depletion of system memory, aka a Firepower Detection Engine SSL Decryption Memory Consumption Denial of Service vulnerability. If this memory leak persists over time, a denial of service (DoS) condition could develop because traffic can cease to be forwarded through the device. The vulnerability is due to an error in how the Firepower Detection Snort Engine handles SSL traffic decryption and notifications to and from the Adaptive Security Appliance (ASA) handler. An attacker could exploit this vulnerability by sending a steady stream of malicious Secure Sockets Layer (SSL) traffic through the device. An exploit could allow the attacker to cause a DoS condition when the device runs low on system memory. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.0.1 and later, running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Firepower 2100 Series Security Appliances, Firepower 4100 Series Security Appliances, Firepower 9300 Series Security Appliances. Cisco Bug IDs: CSCve02069. |
| The XFS_IS_REALTIME_INODE macro in fs/xfs/xfs_linux.h in the Linux kernel before 4.13.2 does not verify that a filesystem has a realtime device, which allows local users to cause a denial of service (NULL pointer dereference and OOPS) via vectors related to setting an RHINHERIT flag on a directory. |
| A vulnerability in the handling of IP fragments for the Cisco Small Business SPA300, SPA500, and SPA51x Series IP Phones could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to the inability to handle many large IP fragments for reassembly in a short duration. An attacker could exploit this vulnerability by sending a crafted stream of IP fragments to the targeted device. An exploit could allow the attacker to cause a DoS condition when the device unexpectedly reloads. Cisco Bug IDs: CSCve82586. |
| A vulnerability in the wireless controller manager of Cisco IOS XE could allow an unauthenticated, adjacent attacker to cause a restart of the switch and result in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by submitting a crafted association request. An exploit could allow the attacker to cause the switch to restart. This vulnerability affects Cisco Catalyst 3650 and 3850 switches running IOS XE Software versions 16.1 through 16.3.3, and acting as wireless LAN controllers (WLC). Cisco Bug IDs: CSCvd45069. |
