| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDS on DCN35
[Why]
A backport of the change made for DCN401 that addresses an issue where
we turn off the PHY PLL when disabling TMDS output, which causes the
OTG to remain stuck.
The OTG being stuck can lead to a hang in the DCHVM's ability to ACK
invalidations when it thinks the HUBP is still on but it's not receiving
global sync.
The transition to PLL_ON needs to be atomic as there's no guarantee
that the thread isn't pre-empted or is able to complete before the
IOMMU watchdog times out.
[How]
Backport the implementation from dcn401 back to dcn35.
There's a functional difference in when the eDP output is disabled in
dcn401 code so we don't want to utilize it directly. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix potential race in tcp_v6_syn_recv_sock()
Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock()
is done too late.
After tcp_v4_syn_recv_sock(), the child socket is already visible
from TCP ehash table and other cpus might use it.
Since newinet->pinet6 is still pointing to the listener ipv6_pinfo
bad things can happen as syzbot found.
Move the problematic code in tcp_v6_mapped_child_init()
and call this new helper from tcp_v4_syn_recv_sock() before
the ehash insertion.
This allows the removal of one tcp_sync_mss(), since
tcp_v4_syn_recv_sock() will call it with the correct
context. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: fore200e: fix use-after-free in tasklets during device removal
When the PCA-200E or SBA-200E adapter is being detached, the fore200e
is deallocated. However, the tx_tasklet or rx_tasklet may still be running
or pending, leading to use-after-free bug when the already freed fore200e
is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet().
One of the race conditions can occur as follows:
CPU 0 (cleanup) | CPU 1 (tasklet)
fore200e_pca_remove_one() | fore200e_interrupt()
fore200e_shutdown() | tasklet_schedule()
kfree(fore200e) | fore200e_tx_tasklet()
| fore200e-> // UAF
Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before
the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to
synchronize with any pending or running tasklets. Moreover, since
fore200e_reset() could prevent further interrupts or data transfers,
the tasklet_kill() should be placed after fore200e_reset() to prevent
the tasklet from being rescheduled in fore200e_interrupt(). Finally,
it only needs to do tasklet_kill() when the fore200e state is greater
than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized
in earlier states. In a word, the tasklet_kill() should be placed in
the FORE200E_STATE_IRQ branch within the switch...case structure.
This bug was identified through static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Add SRCU protection for reading PDPTRs in __get_sregs2()
Add SRCU read-side protection when reading PDPTR registers in
__get_sregs2().
Reading PDPTRs may trigger access to guest memory:
kvm_pdptr_read() -> svm_cache_reg() -> load_pdptrs() ->
kvm_vcpu_read_guest_page() -> kvm_vcpu_gfn_to_memslot()
kvm_vcpu_gfn_to_memslot() dereferences memslots via __kvm_memslots(),
which uses srcu_dereference_check() and requires either kvm->srcu or
kvm->slots_lock to be held. Currently only vcpu->mutex is held,
triggering lockdep warning:
=============================
WARNING: suspicious RCU usage in kvm_vcpu_gfn_to_memslot
6.12.59+ #3 Not tainted
include/linux/kvm_host.h:1062 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz.5.1717/15100:
#0: ff1100002f4b00b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x1d5/0x1590
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xf0/0x120 lib/dump_stack.c:120
lockdep_rcu_suspicious+0x1e3/0x270 kernel/locking/lockdep.c:6824
__kvm_memslots include/linux/kvm_host.h:1062 [inline]
__kvm_memslots include/linux/kvm_host.h:1059 [inline]
kvm_vcpu_memslots include/linux/kvm_host.h:1076 [inline]
kvm_vcpu_gfn_to_memslot+0x518/0x5e0 virt/kvm/kvm_main.c:2617
kvm_vcpu_read_guest_page+0x27/0x50 virt/kvm/kvm_main.c:3302
load_pdptrs+0xff/0x4b0 arch/x86/kvm/x86.c:1065
svm_cache_reg+0x1c9/0x230 arch/x86/kvm/svm/svm.c:1688
kvm_pdptr_read arch/x86/kvm/kvm_cache_regs.h:141 [inline]
__get_sregs2 arch/x86/kvm/x86.c:11784 [inline]
kvm_arch_vcpu_ioctl+0x3e20/0x4aa0 arch/x86/kvm/x86.c:6279
kvm_vcpu_ioctl+0x856/0x1590 virt/kvm/kvm_main.c:4663
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xbd/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: gen2: Add sanity check for session stop
In iris_kill_session, inst->state is set to IRIS_INST_ERROR and
session_close is executed, which will kfree(inst_hfi_gen2->packet).
If stop_streaming is called afterward, it will cause a crash.
Add a NULL check for inst_hfi_gen2->packet before sendling STOP packet
to firmware to fix that. |
| PraisonAI is a multi-agent teams system. Prior to version 4.6.34, PraisonAI's MCP (Model Context Protocol) server (praisonai mcp serve) registers four file-handling tools by default — praisonai.rules.create, praisonai.rules.show, praisonai.rules.delete, and praisonai.workflow.show. Each accepts a path or filename string from MCP tools/call arguments and joins it onto ~/.praison/rules/ (or, for workflow.show, accepts an absolute path) with no containment check. The JSON-RPC dispatcher passes params["arguments"] blind to each handler via **kwargs without validating against the advertised input schema. By setting rule_name="../../<some-path>" an attacker walks out of the rules directory and writes any file the running user can write. Dropping a Python .pth file into the user site-packages directory escalates this primitive to arbitrary code execution in any subsequent Python process the user spawns — the next praisonai CLI invocation, an IDE script run, the user's python REPL, or any background Python service. This issue has been patched in version 4.6.34. |
| OpenClaw before 2026.4.20 contains an improper environment variable validation vulnerability in MCP stdio server configuration that allows attackers to execute arbitrary code. Malicious workspace configurations can pass dangerous startup variables like NODE_OPTIONS, LD_PRELOAD, or BASH_ENV to spawned MCP server processes, enabling code injection when operators start sessions using those servers. |
| In the Linux kernel, the following vulnerability has been resolved:
alpha: fix user-space corruption during memory compaction
Alpha systems can suffer sporadic user-space crashes and heap
corruption when memory compaction is enabled.
Symptoms include SIGSEGV, glibc allocator failures (e.g. "unaligned
tcache chunk"), and compiler internal errors. The failures disappear
when compaction is disabled or when using global TLB invalidation.
The root cause is insufficient TLB shootdown during page migration.
Alpha relies on ASN-based MM context rollover for instruction cache
coherency, but this alone is not sufficient to prevent stale data or
instruction translations from surviving migration.
Fix this by introducing a migration-specific helper that combines:
- MM context invalidation (ASN rollover),
- immediate per-CPU TLB invalidation (TBI),
- synchronous cross-CPU shootdown when required.
The helper is used only by migration/compaction paths to avoid changing
global TLB semantics.
Additionally, update flush_tlb_other(), pte_clear(), to use
READ_ONCE()/WRITE_ONCE() for correct SMP memory ordering.
This fixes observed crashes on both UP and SMP Alpha systems. |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to version 3.7.16, the runWidget function in src/app/widgets/load-widget.js constructs a file path by directly concatenating user‑supplied widget identifiers without any sanitisation. Because runWidget is exposed to the renderer process via an asynchronous IPC handler with no input validation, an attacker who achieves JavaScript execution inside the renderer (for example, through a malicious plugin or a cross‑site scripting flaw in the built‑in webview) can abuse a path traversal (../) to load and execute an arbitrary JavaScript file anywhere on the victim’s filesystem. This gives the attacker local code execution with the full privileges of the electerm process, leading to complete system compromise. This issue has been patched in version 3.7.16. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in .NET Framework allows an unauthorized attacker to deny service over a network. |
| Kdenlive before 26.04.1 allows dangerous proxy parameters when an attacker-controlled project file is used. |
| uuid is for the creation of RFC9562 (formerly RFC4122) UUIDs. Prior to 14.0.0, v3, v5, and v6 accept external output buffers but do not reject out-of-range writes (small buf or large offset). This allows silent partial writes into caller-provided buffers. This vulnerability is fixed in 14.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery
In case of a TX error CQE, a recovery flow is triggered,
mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc,
desyncing the DMA FIFO producer and consumer.
After recovery, the producer pushes new DMA entries at the old
dma_fifo_pc, while the consumer reads from position 0.
This causes us to unmap stale DMA addresses from before the recovery.
The DMA FIFO is a purely software construct with no HW counterpart.
At the point of reset, all WQEs have been flushed so dma_fifo_cc is
already equal to dma_fifo_pc. There is no need to reset either counter,
similar to how skb_fifo pc/cc are untouched.
Remove the 'dma_fifo_cc = 0' reset.
This fixes the following WARNING:
WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90
Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables]
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:iommu_dma_unmap_page+0x79/0x90
Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00
Call Trace:
<IRQ>
? __warn+0x7d/0x110
? iommu_dma_unmap_page+0x79/0x90
? report_bug+0x16d/0x180
? handle_bug+0x4f/0x90
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? iommu_dma_unmap_page+0x79/0x90
? iommu_dma_unmap_page+0x2e/0x90
dma_unmap_page_attrs+0x10d/0x1b0
mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core]
mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core]
mlx5e_napi_poll+0x8b/0xac0 [mlx5_core]
__napi_poll+0x24/0x190
net_rx_action+0x32a/0x3b0
? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core]
? notifier_call_chain+0x35/0xa0
handle_softirqs+0xc9/0x270
irq_exit_rcu+0x71/0xd0
common_interrupt+0x7f/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40 |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: fix PTP use-after-free during reset
Commit 7c01dbfc8a1c5f ("iavf: periodically cache PHC time") introduced a
worker to cache PHC time, but failed to stop it during reset or disable.
This creates a race condition where `iavf_reset_task()` or
`iavf_disable_vf()` free adapter resources (AQ) while the worker is still
running. If the worker triggers `iavf_queue_ptp_cmd()` during teardown, it
accesses freed memory/locks, leading to a crash.
Fix this by calling `iavf_ptp_release()` before tearing down the adapter.
This ensures `ptp_clock_unregister()` synchronously cancels the worker and
cleans up the chardev before the backing resources are destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bonding: Fix nd_tbl NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If bonding ARP/NS validation is enabled, an IPv6
NS/NA packet received on a slave can reach bond_validate_na(), which
calls bond_has_this_ip6(). That path calls ipv6_chk_addr() and can
crash in __ipv6_chk_addr_and_flags().
BUG: kernel NULL pointer dereference, address: 00000000000005d8
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:__ipv6_chk_addr_and_flags+0x69/0x170
Call Trace:
<IRQ>
ipv6_chk_addr+0x1f/0x30
bond_validate_na+0x12e/0x1d0 [bonding]
? __pfx_bond_handle_frame+0x10/0x10 [bonding]
bond_rcv_validate+0x1a0/0x450 [bonding]
bond_handle_frame+0x5e/0x290 [bonding]
? srso_alias_return_thunk+0x5/0xfbef5
__netif_receive_skb_core.constprop.0+0x3e8/0xe50
? srso_alias_return_thunk+0x5/0xfbef5
? update_cfs_rq_load_avg+0x1a/0x240
? srso_alias_return_thunk+0x5/0xfbef5
? __enqueue_entity+0x5e/0x240
__netif_receive_skb_one_core+0x39/0xa0
process_backlog+0x9c/0x150
__napi_poll+0x30/0x200
? srso_alias_return_thunk+0x5/0xfbef5
net_rx_action+0x338/0x3b0
handle_softirqs+0xc9/0x2a0
do_softirq+0x42/0x60
</IRQ>
<TASK>
__local_bh_enable_ip+0x62/0x70
__dev_queue_xmit+0x2d3/0x1000
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? packet_parse_headers+0x10a/0x1a0
packet_sendmsg+0x10da/0x1700
? kick_pool+0x5f/0x140
? srso_alias_return_thunk+0x5/0xfbef5
? __queue_work+0x12d/0x4f0
__sys_sendto+0x1f3/0x220
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x101/0xf80
? exc_page_fault+0x6e/0x170
? srso_alias_return_thunk+0x5/0xfbef5
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this by checking ipv6_mod_enabled() before dispatching IPv6 packets to
bond_na_rcv(). If IPv6 is disabled, return early from bond_rcv_validate()
and avoid the path to ipv6_chk_addr(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain()
In the drain loop, the local variable 'runtime' is reassigned to a
linked stream's runtime (runtime = s->runtime at line 2157). After
releasing the stream lock at line 2169, the code accesses
runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size
(lines 2170-2178) — all referencing the linked stream's runtime without
any lock or refcount protecting its lifetime.
A concurrent close() on the linked stream's fd triggers
snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private()
→ snd_pcm_unlink() → snd_pcm_detach_substream() → kfree(runtime).
No synchronization prevents kfree(runtime) from completing while the
drain path dereferences the stale pointer.
Fix by caching the needed runtime fields (no_period_wakeup, rate,
buffer_size) into local variables while still holding the stream lock,
and using the cached values after the lock is released. |
| In the Linux kernel, the following vulnerability has been resolved:
kthread: consolidate kthread exit paths to prevent use-after-free
Guillaume reported crashes via corrupted RCU callback function pointers
during KUnit testing. The crash was traced back to the pidfs rhashtable
conversion which replaced the 24-byte rb_node with an 8-byte rhash_head
in struct pid, shrinking it from 160 to 144 bytes.
struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With
CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to
192 bytes and share the same slab cache. struct pid.rcu.func and
struct kthread.affinity_node both sit at offset 0x78.
When a kthread exits via make_task_dead() it bypasses kthread_exit() and
misses the affinity_node cleanup. free_kthread_struct() frees the memory
while the node is still linked into the global kthread_affinity_list. A
subsequent list_del() by another kthread writes through dangling list
pointers into the freed and reused memory, corrupting the pid's
rcu.func pointer.
Instead of patching free_kthread_struct() to handle the missed cleanup,
consolidate all kthread exit paths. Turn kthread_exit() into a macro
that calls do_exit() and add kthread_do_exit() which is called from
do_exit() for any task with PF_KTHREAD set. This guarantees that
kthread-specific cleanup always happens regardless of the exit path -
make_task_dead(), direct do_exit(), or kthread_exit().
Replace __to_kthread() with a new tsk_is_kthread() accessor in the
public header. Export do_exit() since module code using the
kthread_exit() macro now needs it directly. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Fix rcu_tasks stall in threaded busypoll
I was debugging a NIC driver when I noticed that when I enable
threaded busypoll, bpftrace hangs when starting up. dmesg showed:
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 10658 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 40793 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 131273 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 402058 jiffies old.
INFO: rcu_tasks detected stalls on tasks:
00000000769f52cd: .N nvcsw: 2/2 holdout: 1 idle_cpu: -1/64
task:napi/eth2-8265 state:R running task stack:0 pid:48300 tgid:48300 ppid:2 task_flags:0x208040 flags:0x00004000
Call Trace:
<TASK>
? napi_threaded_poll_loop+0x27c/0x2c0
? __pfx_napi_threaded_poll+0x10/0x10
? napi_threaded_poll+0x26/0x80
? kthread+0xfa/0x240
? __pfx_kthread+0x10/0x10
? ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
? ret_from_fork_asm+0x1a/0x30
</TASK>
The cause is that in threaded busypoll, the main loop is in
napi_threaded_poll rather than napi_threaded_poll_loop, where the
latter rarely iterates more than once within its loop. For
rcu_softirq_qs_periodic inside napi_threaded_poll_loop to report its
qs state, the last_qs must be 100ms behind, and this can't happen
because napi_threaded_poll_loop rarely iterates in threaded busypoll,
and each time napi_threaded_poll_loop is called last_qs is reset to
latest jiffies.
This patch changes so that in threaded busypoll, last_qs is saved
in the outer napi_threaded_poll, and whether busy_poll_last_qs
is NULL indicates whether napi_threaded_poll_loop is called for
busypoll. This way last_qs would not reset to latest jiffies on
each invocation of napi_threaded_poll_loop. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc, perf: Check that current->mm is alive before getting user callchain
It may happen that mm is already released, which leads to kernel panic.
This adds the NULL check for current->mm, similarly to
commit 20afc60f892d ("x86, perf: Check that current->mm is alive before getting user callchain").
I was getting this panic when running a profiling BPF program
(profile.py from bcc-tools):
[26215.051935] Kernel attempted to read user page (588) - exploit attempt? (uid: 0)
[26215.051950] BUG: Kernel NULL pointer dereference on read at 0x00000588
[26215.051952] Faulting instruction address: 0xc00000000020fac0
[26215.051957] Oops: Kernel access of bad area, sig: 11 [#1]
[...]
[26215.052049] Call Trace:
[26215.052050] [c000000061da6d30] [c00000000020fc10] perf_callchain_user_64+0x2d0/0x490 (unreliable)
[26215.052054] [c000000061da6dc0] [c00000000020f92c] perf_callchain_user+0x1c/0x30
[26215.052057] [c000000061da6de0] [c0000000005ab2a0] get_perf_callchain+0x100/0x360
[26215.052063] [c000000061da6e70] [c000000000573bc8] bpf_get_stackid+0x88/0xf0
[26215.052067] [c000000061da6ea0] [c008000000042258] bpf_prog_16d4ab9ab662f669_do_perf_event+0xf8/0x274
[...]
In addition, move storing the top-level stack entry to generic
perf_callchain_user to make sure the top-evel entry is always captured,
even if current->mm is NULL.
[Maddy: fixed message to avoid checkpatch format style error] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Fix net_device lifecycle with device_move
The network device outlived its parent gadget device during
disconnection, resulting in dangling sysfs links and null pointer
dereference problems.
A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1]
was reverted due to power management ordering concerns and a NO-CARRIER
regression.
A subsequent attempt to defer net_device allocation to bind [2] broke
1:1 mapping between function instance and network device, making it
impossible for configfs to report the resolved interface name. This
results in a regression where the DHCP server fails on pmOS.
Use device_move to reparent the net_device between the gadget device and
/sys/devices/virtual/ across bind/unbind cycles. This preserves the
network interface across USB reconnection, allowing the DHCP server to
retain their binding.
Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use
__free(detach_gadget) macro to undo attachment on bind failure. The
bind_count ensures device_move executes only on the first bind.
[1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/
[2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/ |
