| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: pidff: Fix condition effect bit clearing
As reported by MPDarkGuy on discord, NULL pointer dereferences were
happening because not all the conditional effects bits were cleared.
Properly clear all conditional effect bits from ffbit |
| In the Linux kernel, the following vulnerability has been resolved:
cxl: Fix race of nvdimm_bus object when creating nvdimm objects
Found issue during running of cxl-translate.sh unit test. Adding a 3s
sleep right before the test seems to make the issue reproduce fairly
consistently. The cxl_translate module has dependency on cxl_acpi and
causes orphaned nvdimm objects to reprobe after cxl_acpi is removed.
The nvdimm_bus object is registered by the cxl_nvb object when
cxl_acpi_probe() is called. With the nvdimm_bus object missing,
__nd_device_register() will trigger NULL pointer dereference when
accessing the dev->parent that points to &nvdimm_bus->dev.
[ 192.884510] BUG: kernel NULL pointer dereference, address: 000000000000006c
[ 192.895383] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20250812-19.fc42 08/12/2025
[ 192.897721] Workqueue: cxl_port cxl_bus_rescan_queue [cxl_core]
[ 192.899459] RIP: 0010:kobject_get+0xc/0x90
[ 192.924871] Call Trace:
[ 192.925959] <TASK>
[ 192.926976] ? pm_runtime_init+0xb9/0xe0
[ 192.929712] __nd_device_register.part.0+0x4d/0xc0 [libnvdimm]
[ 192.933314] __nvdimm_create+0x206/0x290 [libnvdimm]
[ 192.936662] cxl_nvdimm_probe+0x119/0x1d0 [cxl_pmem]
[ 192.940245] cxl_bus_probe+0x1a/0x60 [cxl_core]
[ 192.943349] really_probe+0xde/0x380
This patch also relies on the previous change where
devm_cxl_add_nvdimm_bridge() is called from drivers/cxl/pmem.c instead
of drivers/cxl/core.c to ensure the dependency of cxl_acpi on cxl_pmem.
1. Set probe_type of cxl_nvb to PROBE_FORCE_SYNCHRONOUS to ensure the
driver is probed synchronously when add_device() is called.
2. Add a check in __devm_cxl_add_nvdimm_bridge() to ensure that the
cxl_nvb driver is attached during cxl_acpi_probe().
3. Take the cxl_root uport_dev lock and the cxl_nvb->dev lock in
devm_cxl_add_nvdimm() before checking nvdimm_bus is valid.
4. Set cxl_nvdimm flag to CXL_NVD_F_INVALIDATED so cxl_nvdimm_probe()
will exit with -EBUSY.
The removal of cxl_nvdimm devices should prevent any orphaned devices
from probing once the nvdimm_bus is gone.
[ dj: Fixed 0-day reported kdoc issue. ]
[ dj: Fix cxl_nvb reference leak on error. Gregory (kreview-0811365) ] |
| In the Linux kernel, the following vulnerability has been resolved:
can: usb: f81604: correctly anchor the urb in the read bulk callback
When submitting an urb, that is using the anchor pattern, it needs to be
anchored before submitting it otherwise it could be leaked if
usb_kill_anchored_urbs() is called. This logic is correctly done
elsewhere in the driver, except in the read bulk callback so do that
here also. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: io: Extract user memory type in ioremap_prot()
The only caller of ioremap_prot() outside of the generic ioremap()
implementation is generic_access_phys(), which passes a 'pgprot_t' value
determined from the user mapping of the target 'pfn' being accessed by
the kernel. On arm64, the 'pgprot_t' contains all of the non-address
bits from the pte, including the permission controls, and so we end up
returning a new user mapping from ioremap_prot() which faults when
accessed from the kernel on systems with PAN:
| Unable to handle kernel read from unreadable memory at virtual address ffff80008ea89000
| ...
| Call trace:
| __memcpy_fromio+0x80/0xf8
| generic_access_phys+0x20c/0x2b8
| __access_remote_vm+0x46c/0x5b8
| access_remote_vm+0x18/0x30
| environ_read+0x238/0x3e8
| vfs_read+0xe4/0x2b0
| ksys_read+0xcc/0x178
| __arm64_sys_read+0x4c/0x68
Extract only the memory type from the user 'pgprot_t' in ioremap_prot()
and assert that we're being passed a user mapping, to protect us against
any changes in future that may require additional handling. To avoid
falsely flagging users of ioremap(), provide our own ioremap() macro
which simply wraps __ioremap_prot(). |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: gcs: Do not set PTE_SHARED on GCS mappings if FEAT_LPA2 is enabled
When FEAT_LPA2 is enabled, bits 8-9 of the PTE replace the
shareability attribute with bits 50-51 of the output address. The
_PAGE_GCS{,_RO} definitions include the PTE_SHARED bits as 0b11 (this
matches the other _PAGE_* definitions) but using this macro directly
leads to the following panic when enabling GCS on a system/model with
LPA2:
Unable to handle kernel paging request at virtual address fffff1ffc32d8008
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 52-bit VAs, pgdp=0000000060f4d000
[fffff1ffc32d8008] pgd=100000006184b003, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
CPU: 0 UID: 0 PID: 513 Comm: gcs_write_fault Tainted: G M 7.0.0-rc1 #1 PREEMPT
Tainted: [M]=MACHINE_CHECK
Hardware name: QEMU QEMU Virtual Machine, BIOS 2025.02-8+deb13u1 11/08/2025
pstate: 03402005 (nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : zap_huge_pmd+0x168/0x468
lr : zap_huge_pmd+0x2c/0x468
sp : ffff800080beb660
x29: ffff800080beb660 x28: fff00000c2058180 x27: ffff800080beb898
x26: fff00000c2058180 x25: ffff800080beb820 x24: 00c800010b600f41
x23: ffffc1ffc30af1a8 x22: fff00000c2058180 x21: 0000ffff8dc00000
x20: fff00000c2bc6370 x19: ffff800080beb898 x18: ffff800080bebb60
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000007
x14: 000000000000000a x13: 0000aaaacbbbffff x12: 0000000000000000
x11: 0000ffff8ddfffff x10: 00000000000001fe x9 : 0000ffff8ddfffff
x8 : 0000ffff8de00000 x7 : 0000ffff8da00000 x6 : fff00000c2bc6370
x5 : 0000ffff8da00000 x4 : 000000010b600000 x3 : ffffc1ffc0000000
x2 : fff00000c2058180 x1 : fffff1ffc32d8000 x0 : 000000c00010b600
Call trace:
zap_huge_pmd+0x168/0x468 (P)
unmap_page_range+0xd70/0x1560
unmap_single_vma+0x48/0x80
unmap_vmas+0x90/0x180
unmap_region+0x88/0xe4
vms_complete_munmap_vmas+0xf8/0x1e0
do_vmi_align_munmap+0x158/0x180
do_vmi_munmap+0xac/0x160
__vm_munmap+0xb0/0x138
vm_munmap+0x14/0x20
gcs_free+0x70/0x80
mm_release+0x1c/0xc8
exit_mm_release+0x28/0x38
do_exit+0x190/0x8ec
do_group_exit+0x34/0x90
get_signal+0x794/0x858
arch_do_signal_or_restart+0x11c/0x3e0
exit_to_user_mode_loop+0x10c/0x17c
el0_da+0x8c/0x9c
el0t_64_sync_handler+0xd0/0xf0
el0t_64_sync+0x198/0x19c
Code: aa1603e2 d34cfc00 cb813001 8b011861 (f9400420)
Similarly to how the kernel handles protection_map[], use a
gcs_page_prot variable to store the protection bits and clear PTE_SHARED
if LPA2 is enabled.
Also remove the unused PAGE_GCS{,_RO} macros. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix use-after-free on error path
In the error path of sev_tsm_init_locked(), the code dereferences 't'
after it has been freed with kfree(). The pr_err() statement attempts
to access t->tio_en and t->tio_init_done after the memory has been
released.
Move the pr_err() call before kfree(t) to access the fields while the
memory is still valid.
This issue reported by Smatch static analyser |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix preempt count leak in napi poll tracepoint
Using get_cpu() in the tracepoint assignment causes an obvious preempt
count leak because nothing invokes put_cpu() to undo it:
softirq: huh, entered softirq 3 NET_RX with preempt_count 00000100, exited with 00000101?
This clearly has seen a lot of testing in the last 3+ years...
Use smp_processor_id() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kaweth: validate USB endpoints
The kaweth driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix invalid wait context in ctx_sched_in()
Lockdep found a bug in the event scheduling when a pinned event was
failed and wakes up the threads in the ring buffer like below.
It seems it should not grab a wait-queue lock under perf-context lock.
Let's do it with irq_work.
[ 39.913691] =============================
[ 39.914157] [ BUG: Invalid wait context ]
[ 39.914623] 6.15.0-next-20250530-next-2025053 #1 Not tainted
[ 39.915271] -----------------------------
[ 39.915731] repro/837 is trying to lock:
[ 39.916191] ffff88801acfabd8 (&event->waitq){....}-{3:3}, at: __wake_up+0x26/0x60
[ 39.917182] other info that might help us debug this:
[ 39.917761] context-{5:5}
[ 39.918079] 4 locks held by repro/837:
[ 39.918530] #0: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: __perf_event_task_sched_in+0xd1/0xbc0
[ 39.919612] #1: ffff88806ca3c6f8 (&cpuctx_lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1a7/0xbc0
[ 39.920748] #2: ffff88800d91fc18 (&ctx->lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1f9/0xbc0
[ 39.921819] #3: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: perf_event_wakeup+0x6c/0x470 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Add NULL pointer check to trigger_data_free()
If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse()
jumps to the out_free error path. While kfree() safely handles a NULL
pointer, trigger_data_free() does not. This causes a NULL pointer
dereference in trigger_data_free() when evaluating
data->cmd_ops->set_filter.
Fix the problem by adding a NULL pointer check to trigger_data_free().
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: equilibrium: fix warning trace on load
The callback functions 'eqbr_irq_mask()' and 'eqbr_irq_ack()' are also
called in the callback function 'eqbr_irq_mask_ack()'. This is done to
avoid source code duplication. The problem, is that in the function
'eqbr_irq_mask()' also calles the gpiolib function 'gpiochip_disable_irq()'
This generates the following warning trace in the log for every gpio on
load.
[ 6.088111] ------------[ cut here ]------------
[ 6.092440] WARNING: CPU: 3 PID: 1 at drivers/gpio/gpiolib.c:3810 gpiochip_disable_irq+0x39/0x50
[ 6.097847] Modules linked in:
[ 6.097847] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.59+ #0
[ 6.097847] Tainted: [W]=WARN
[ 6.097847] RIP: 0010:gpiochip_disable_irq+0x39/0x50
[ 6.097847] Code: 39 c6 48 19 c0 21 c6 48 c1 e6 05 48 03 b2 38 03 00 00 48 81 fe 00 f0 ff ff 77 11 48 8b 46 08 f6 c4 02 74 06 f0 80 66 09 fb c3 <0f> 0b 90 0f 1f 40 00 c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40
[ 6.097847] RSP: 0000:ffffc9000000b830 EFLAGS: 00010046
[ 6.097847] RAX: 0000000000000045 RBX: ffff888001be02a0 RCX: 0000000000000008
[ 6.097847] RDX: ffff888001be9000 RSI: ffff888001b2dd00 RDI: ffff888001be02a0
[ 6.097847] RBP: ffffc9000000b860 R08: 0000000000000000 R09: 0000000000000000
[ 6.097847] R10: 0000000000000001 R11: ffff888001b2a154 R12: ffff888001be0514
[ 6.097847] R13: ffff888001be02a0 R14: 0000000000000008 R15: 0000000000000000
[ 6.097847] FS: 0000000000000000(0000) GS:ffff888041d80000(0000) knlGS:0000000000000000
[ 6.097847] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.097847] CR2: 0000000000000000 CR3: 0000000003030000 CR4: 00000000001026b0
[ 6.097847] Call Trace:
[ 6.097847] <TASK>
[ 6.097847] ? eqbr_irq_mask+0x63/0x70
[ 6.097847] ? no_action+0x10/0x10
[ 6.097847] eqbr_irq_mask_ack+0x11/0x60
In an other driver (drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c) the
interrupt is not disabled here.
To fix this, do not call the 'eqbr_irq_mask()' and 'eqbr_irq_ack()'
function. Implement instead this directly without disabling the interrupts. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ems_usb: ems_usb_read_bulk_callback(): check the proper length of a message
When looking at the data in a USB urb, the actual_length is the size of
the buffer passed to the driver, not the transfer_buffer_length which is
set by the driver as the max size of the buffer.
When parsing the messages in ems_usb_read_bulk_callback() properly check
the size both at the beginning of parsing the message to make sure it is
big enough for the expected structure, and at the end of the message to
make sure we don't overflow past the end of the buffer for the next
message. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix use-after-free in pm8001_queue_command()
Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors
pm8001_queue_command(), however it introduces a potential cause of a double
free scenario when it changes the function to return -ENODEV in case of phy
down/device gone state.
In this path, pm8001_queue_command() updates task status and calls
task_done to indicate to upper layer that the task has been handled.
However, this also frees the underlying SAS task. A -ENODEV is then
returned to the caller. When libsas sas_ata_qc_issue() receives this error
value, it assumes the task wasn't handled/queued by LLDD and proceeds to
clean up and free the task again, resulting in a double free.
Since pm8001_queue_command() handles the SAS task in this case, it should
return 0 to the caller indicating that the task has been handled. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: fix unwinding in error path in rocket_probe
When rocket_core_init() fails (as could be the case with EPROBE_DEFER),
we need to properly unwind by decrementing the counter we just
incremented and if this is the first core we failed to probe, remove the
rocket DRM device with rocket_device_fini() as well. This matches the
logic in rocket_remove(). Failing to properly unwind results in
out-of-bounds accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix NULL pointer deref in ip6_rt_get_dev_rcu()
l3mdev_master_dev_rcu() can return NULL when the slave device is being
un-slaved from a VRF. All other callers deal with this, but we lost
the fallback to loopback in ip6_rt_pcpu_alloc() -> ip6_rt_get_dev_rcu()
with commit 4832c30d5458 ("net: ipv6: put host and anycast routes on
device with address").
KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
RIP: 0010:ip6_rt_pcpu_alloc (net/ipv6/route.c:1418)
Call Trace:
ip6_pol_route (net/ipv6/route.c:2318)
fib6_rule_lookup (net/ipv6/fib6_rules.c:115)
ip6_route_output_flags (net/ipv6/route.c:2607)
vrf_process_v6_outbound (drivers/net/vrf.c:437)
I was tempted to rework the un-slaving code to clear the flag first
and insert synchronize_rcu() before we remove the upper. But looks like
the explicit fallback to loopback_dev is an established pattern.
And I guess avoiding the synchronize_rcu() is nice, too. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Don't log plaintext credentials in cifs_set_cifscreds
When debug logging is enabled, cifs_set_cifscreds() logs the key
payload and exposes the plaintext username and password. Remove the
debug log to avoid exposing credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Add allocation failure check for Entity name
Currently find_sdca_entity_iot() can allocate a string for the
Entity name but it doesn't check if that allocation succeeded.
Add the missing NULL check after the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: purge error queues in socket destructors
When TX timestamping is enabled via SO_TIMESTAMPING, SKBs may be queued
into sk_error_queue and will stay there until consumed. If userspace never
gets to read the timestamps, or if the controller is removed unexpectedly,
these SKBs will leak.
Fix by adding skb_queue_purge() calls for sk_error_queue in affected
bluetooth destructors. RFCOMM does not currently use sk_error_queue. |
