| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: reserve mac_len headroom when recompressed SRH grows
ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps
the next segment into ipv6_hdr->daddr, recompresses, then pulls the old
header and pushes the new one plus the IPv6 header back. The
recompressed header can be larger than the received one when the swap
reduces the common-prefix length the segments share with daddr (CmprI=0,
CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes).
pskb_expand_head() was gated on segments_left == 0, so on earlier
segments the push consumed unchecked headroom. Once skb_push() leaves
fewer than skb->mac_len bytes in front of data,
skb_mac_header_rebuild()'s call to:
skb_set_mac_header(skb, -skb->mac_len);
will store (data - head) - mac_len into the u16 mac_header field, which
wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB
past skb->head.
A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two
segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one
pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv.
Fix this by expanding the head whenever the remaining room is less than
the push size plus mac_len, and request that much extra so the rebuilt
MAC header fits afterwards. |
| Open ISES Tickets before 3.44.2 contains a reflected cross-site scripting vulnerability in do_unit_mail.php that allows authenticated attackers to inject arbitrary JavaScript by passing an unsanitized value through the the_ticket GET parameter directly into a JavaScript variable assignment. Attackers can craft a malicious URL containing a JavaScript payload in the the_ticket parameter that executes in the victim's browser when the URL is visited. |
| Open ISES Tickets before 3.44.2 contains a reflected cross-site scripting vulnerability in add_note.php that allows authenticated attackers to inject arbitrary JavaScript by passing an unsanitized value through the ticket_id GET parameter directly into a hidden input field VALUE attribute. Attackers can craft a malicious URL containing a JavaScript payload in the ticket_id parameter that executes in the victim's browser when the URL is visited. |
| In the Linux kernel, the following vulnerability has been resolved:
unshare: fix unshare_fs() handling
There's an unpleasant corner case in unshare(2), when we have a
CLONE_NEWNS in flags and current->fs hadn't been shared at all; in that
case copy_mnt_ns() gets passed current->fs instead of a private copy,
which causes interesting warts in proof of correctness]
> I guess if private means fs->users == 1, the condition could still be true.
Unfortunately, it's worse than just a convoluted proof of correctness.
Consider the case when we have CLONE_NEWCGROUP in addition to CLONE_NEWNS
(and current->fs->users == 1).
We pass current->fs to copy_mnt_ns(), all right. Suppose it succeeds and
flips current->fs->{pwd,root} to corresponding locations in the new namespace.
Now we proceed to copy_cgroup_ns(), which fails (e.g. with -ENOMEM).
We call put_mnt_ns() on the namespace created by copy_mnt_ns(), it's
destroyed and its mount tree is dissolved, but... current->fs->root and
current->fs->pwd are both left pointing to now detached mounts.
They are pinning those, so it's not a UAF, but it leaves the calling
process with unshare(2) failing with -ENOMEM _and_ leaving it with
pwd and root on detached isolated mounts. The last part is clearly a bug.
There is other fun related to that mess (races with pivot_root(), including
the one between pivot_root() and fork(), of all things), but this one
is easy to isolate and fix - treat CLONE_NEWNS as "allocate a new
fs_struct even if it hadn't been shared in the first place". Sure, we could
go for something like "if both CLONE_NEWNS *and* one of the things that might
end up failing after copy_mnt_ns() call in create_new_namespaces() are set,
force allocation of new fs_struct", but let's keep it simple - the cost
of copy_fs_struct() is trivial.
Another benefit is that copy_mnt_ns() with CLONE_NEWNS *always* gets
a freshly allocated fs_struct, yet to be attached to anything. That
seriously simplifies the analysis...
FWIW, that bug had been there since the introduction of unshare(2) ;-/ |
| Unrestricted Upload of File with Dangerous Type vulnerability in WP Swings Gift Cards For WooCommerce Pro allows Using Malicious Files.
This issue affects Gift Cards For WooCommerce Pro: from n/a through 4.2.6. |
| When a fusefs file system implements extended attributes, the kernel may send a FUSE_LISTXATTR message to the userspace daemon to retrieve the list of extended attributes for a given file. The FUSE protocol requires the daemon to return a packed list of NUL-terminated strings. The fusefs kernel module calls strlen() on this daemon-supplied buffer without first verifying that the entire list is NUL-terminated.
If a malicious daemon sends a non-NUL-terminated list, the fusefs kernel module may read beyond the end of one heap-allocated buffer and potentially write beyond the end of a second buffer. A malicious daemon could disclose up to 253 bytes of kernel heap memory, or it could inject up to 250 attacker-controlled bytes into unallocated kernel heap space. |
| Mantis Bug Tracker (MantisBT) is an open source issue tracker. Versions 2.28.1 and below contain flawed logic that causes improper escaping of a textarea custom field's contents in the Update Issue page, (bug_update_page.php) allowing an attacker to inject HTML and, if CSP settings permit, execute arbitrary JavaScript when the page is loaded. This facilitates session theft, leading to admin account takeover, full project data access. In order to exploit this issue, a textarea-type custom field must be configured for the project, the attack must be carried out by an authenticated user with bug report permission (low privilege). This can affect any user viewing the bug edit form, including administrators. The issue has been fixed in version 2.28.2. If users cannot immediately upgrade, they can work around the issue by using the default Content-Security Policy, which blocks script execution. |
| XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. XWiki Platform is a generic wiki platform. In versions prior to 18.1.0-rc-1, 17.10.3, 17.4.9, and 16.10.17, the POST /wikis/{wikiName} API executes a XAR import without performing any authentication or authorization checks, allowing an unauthenticated attacker to create or update documents in the target wiki. This vulnerability has been patched in XWiki 16.10.17, 17.4.9, 17.10.3, 18.0.1 and 18.1.0-rc-1. |
| The affected product may expose credentials remotely between low privileged visualization users during concurrent login operations due to insufficient isolation of authentication data. The vulnerability affects only login operations within an active visualization session. |
| Authorization bypass through User-Controlled key vulnerability in PosCube Hardware Software and Consulting Ltd. QR Menu allows Exploitation of Trusted Identifiers.
This issue affects QR Menu: through 21052026. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| An authenticated Remote Code Execution (RCE) vulnerability was identified in GlassFish's Administration Console. A user with access to the panel can send crafted requests that allow the execution of arbitrary operating system commands with the privileges of the application service user. |
| A critical Remote Code Execution (RCE) vulnerability was identified in the server-side template rendering mechanism used by the Glassfish gadget handler. The application processes .xml files and evaluates user-supplied values within a context where Expression Language (EL) “expressions” are processed without proper sanitization or escaping. By injecting expressions such as #{7*7}, the server returns 49, confirming server-side EL evaluation. This issue allows a remote attacker to fully compromise the underlying host, enabling capabilities as reading/modifying data, executing arbitrary commands, persistence, and lateral movement. |
| libcasper(3) communicates with helper processes via UNIX domain sockets, and uses the select(2) system call to wait for data to become available. However, it does not verify that its socket descriptor fits within select(2)'s descriptor set size limit of FD_SETSIZE (1024).
An attacker able to cause an application using libcasper(3) to allocate large file descriptors, e.g., by opening many descriptors and executing a program which is not careful to close them upon startup, may trigger stack corruption. If the target application runs with setuid root privileges, this could be used to escalate local privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Add NULL checks when resetting request and reply queues
The driver encountered a crash during resource cleanup when the reply and
request queues were NULL due to freed memory. This issue occurred when the
creation of reply or request queues failed, and the driver freed the memory
first, but attempted to mem set the content of the freed memory, leading to
a system crash.
Add NULL pointer checks for reply and request queues before accessing the
reply/request memory during cleanup |
| In the Linux kernel, the following vulnerability has been resolved:
fs: init flags_valid before calling vfs_fileattr_get
syzbot reported a uninit-value bug in [1].
Similar to the "*get" context where the kernel's internal file_kattr
structure is initialized before calling vfs_fileattr_get(), we should
use the same mechanism when using fa.
[1]
BUG: KMSAN: uninit-value in fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517
fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517
vfs_fileattr_get fs/file_attr.c:94 [inline]
__do_sys_file_getattr fs/file_attr.c:416 [inline]
Local variable fa.i created at:
__do_sys_file_getattr fs/file_attr.c:380 [inline]
__se_sys_file_getattr+0x8c/0xbd0 fs/file_attr.c:372 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: storvsc: Fix scheduling while atomic on PREEMPT_RT
This resolves the follow splat and lock-up when running with PREEMPT_RT
enabled on Hyper-V:
[ 415.140818] BUG: scheduling while atomic: stress-ng-iomix/1048/0x00000002
[ 415.140822] INFO: lockdep is turned off.
[ 415.140823] Modules linked in: intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery pmt_class intel_pmc_ssram_telemetry intel_vsec ghash_clmulni_intel aesni_intel rapl binfmt_misc nls_ascii nls_cp437 vfat fat snd_pcm hyperv_drm snd_timer drm_client_lib drm_shmem_helper snd sg soundcore drm_kms_helper pcspkr hv_balloon hv_utils evdev joydev drm configfs efi_pstore nfnetlink vsock_loopback vmw_vsock_virtio_transport_common hv_sock vmw_vsock_vmci_transport vsock vmw_vmci efivarfs autofs4 ext4 crc16 mbcache jbd2 sr_mod sd_mod cdrom hv_storvsc serio_raw hid_generic scsi_transport_fc hid_hyperv scsi_mod hid hv_netvsc hyperv_keyboard scsi_common
[ 415.140846] Preemption disabled at:
[ 415.140847] [<ffffffffc0656171>] storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc]
[ 415.140854] CPU: 8 UID: 0 PID: 1048 Comm: stress-ng-iomix Not tainted 6.19.0-rc7 #30 PREEMPT_{RT,(full)}
[ 415.140856] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/04/2024
[ 415.140857] Call Trace:
[ 415.140861] <TASK>
[ 415.140861] ? storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc]
[ 415.140863] dump_stack_lvl+0x91/0xb0
[ 415.140870] __schedule_bug+0x9c/0xc0
[ 415.140875] __schedule+0xdf6/0x1300
[ 415.140877] ? rtlock_slowlock_locked+0x56c/0x1980
[ 415.140879] ? rcu_is_watching+0x12/0x60
[ 415.140883] schedule_rtlock+0x21/0x40
[ 415.140885] rtlock_slowlock_locked+0x502/0x1980
[ 415.140891] rt_spin_lock+0x89/0x1e0
[ 415.140893] hv_ringbuffer_write+0x87/0x2a0
[ 415.140899] vmbus_sendpacket_mpb_desc+0xb6/0xe0
[ 415.140900] ? rcu_is_watching+0x12/0x60
[ 415.140902] storvsc_queuecommand+0x669/0xbe0 [hv_storvsc]
[ 415.140904] ? HARDIRQ_verbose+0x10/0x10
[ 415.140908] ? __rq_qos_issue+0x28/0x40
[ 415.140911] scsi_queue_rq+0x760/0xd80 [scsi_mod]
[ 415.140926] __blk_mq_issue_directly+0x4a/0xc0
[ 415.140928] blk_mq_issue_direct+0x87/0x2b0
[ 415.140931] blk_mq_dispatch_queue_requests+0x120/0x440
[ 415.140933] blk_mq_flush_plug_list+0x7a/0x1a0
[ 415.140935] __blk_flush_plug+0xf4/0x150
[ 415.140940] __submit_bio+0x2b2/0x5c0
[ 415.140944] ? submit_bio_noacct_nocheck+0x272/0x360
[ 415.140946] submit_bio_noacct_nocheck+0x272/0x360
[ 415.140951] ext4_read_bh_lock+0x3e/0x60 [ext4]
[ 415.140995] ext4_block_write_begin+0x396/0x650 [ext4]
[ 415.141018] ? __pfx_ext4_da_get_block_prep+0x10/0x10 [ext4]
[ 415.141038] ext4_da_write_begin+0x1c4/0x350 [ext4]
[ 415.141060] generic_perform_write+0x14e/0x2c0
[ 415.141065] ext4_buffered_write_iter+0x6b/0x120 [ext4]
[ 415.141083] vfs_write+0x2ca/0x570
[ 415.141087] ksys_write+0x76/0xf0
[ 415.141089] do_syscall_64+0x99/0x1490
[ 415.141093] ? rcu_is_watching+0x12/0x60
[ 415.141095] ? finish_task_switch.isra.0+0xdf/0x3d0
[ 415.141097] ? rcu_is_watching+0x12/0x60
[ 415.141098] ? lock_release+0x1f0/0x2a0
[ 415.141100] ? rcu_is_watching+0x12/0x60
[ 415.141101] ? finish_task_switch.isra.0+0xe4/0x3d0
[ 415.141103] ? rcu_is_watching+0x12/0x60
[ 415.141104] ? __schedule+0xb34/0x1300
[ 415.141106] ? hrtimer_try_to_cancel+0x1d/0x170
[ 415.141109] ? do_nanosleep+0x8b/0x160
[ 415.141111] ? hrtimer_nanosleep+0x89/0x100
[ 415.141114] ? __pfx_hrtimer_wakeup+0x10/0x10
[ 415.141116] ? xfd_validate_state+0x26/0x90
[ 415.141118] ? rcu_is_watching+0x12/0x60
[ 415.141120] ? do_syscall_64+0x1e0/0x1490
[ 415.141121] ? do_syscall_64+0x1e0/0x1490
[ 415.141123] ? rcu_is_watching+0x12/0x60
[ 415.141124] ? do_syscall_64+0x1e0/0x1490
[ 415.141125] ? do_syscall_64+0x1e0/0x1490
[ 415.141127] ? irqentry_exit+0x140/0
---truncated--- |
| The encryption mechanism used in Eaton's EasySoft project file was insecure and susceptible to brute force attacks, an attacker with access to this file and the local host
machine could potentially read the sensitive information stored and tamper with the project file. This security issue has been fixed in the latest version of Eaton EasySoft which is available on the Eaton download centre. |
| A vulnerability in the BrowserBot component of Cisco ThousandEyes Enterprise Agent could have allowed an authenticated, remote attacker to execute arbitrary commands on Agents on behalf of the BrowserBot synthetics orchestration process. Cisco has addressed this vulnerability in the Cisco ThousandEyes Enterprise Agent, and no customer action is needed.
This vulnerability was due to insufficient input validation of command arguments that are supplied by the user. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by authenticating to the ThousandEyes SaaS and submitting crafted input into the affected parameter. A successful exploit could have allowed the attacker to execute arbitrary commands within the BrowserBot container as the node user.
To exploit this vulnerability, the attacker must have valid user credentials for the ThousandEyes SaaS and the ability to manage transaction tests. |
| A time-of-check time-of-use vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations.
Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. |
| An origin validation vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations. This is similar to CVE-2026-45206 but exists in a different process protection communication mechanism.
Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. |
