| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Kanboard is project management software that focuses on the Kanban methodology. Prior to version 1.2.46, Kanboard is vulnerable to username enumeration and IP spoofing-based brute-force protection bypass. By analyzing login behavior and abusing trusted HTTP headers, an attacker can determine valid usernames and circumvent rate-limiting or blocking mechanisms. Any organization running a publicly accessible Kanboard instance is affected, especially if relying on IP-based protections like Fail2Ban or CAPTCHA for login rate-limiting. Attackers with access to the login page can exploit this flaw to enumerate valid usernames and bypass IP-based blocking mechanisms, putting all user accounts at higher risk of brute-force or credential stuffing attacks. Version 1.2.46 contains a patch for the issue. |
| liboqs is a C-language cryptographic library that provides implementations of post-quantum cryptography algorithms. Multiple secret-dependent branches have been identified in the reference implementation of the HQC key encapsulation mechanism when it is compiled with Clang for optimization levels above -O0 (-O1, -O2, etc). A proof-of-concept local attack exploits this secret-dependent information to recover the entire secret key. This vulnerability is fixed in 0.14.0. |
| A vulnerability, which was classified as problematic, has been found in Antabot White-Jotter up to 0.2.2. This issue affects some unknown processing of the file /login. The manipulation of the argument username leads to observable response discrepancy. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. |
| A timing side channel in Vault and Vault Enterprise’s (“Vault”) userpass auth method allowed an attacker to distinguish between existing and non-existing users, and potentially enumerate valid usernames for Vault’s Userpass auth method. Fixed in Vault Community Edition 1.20.1 and Vault Enterprise 1.20.1, 1.19.7, 1.18.12, and 1.16.23. |
| An issue discovered in Ruijie EG210G-P, Ruijie EG105G-V2, Ruijie NBR, and Ruijie EG105G routers allows attackers to hijack TCP sessions which could lead to a denial of service. |
| A vulnerability has been identified in RUGGEDCOM i800, RUGGEDCOM i801, RUGGEDCOM i802, RUGGEDCOM i803, RUGGEDCOM M2100, RUGGEDCOM M2100F, RUGGEDCOM M2200, RUGGEDCOM M2200F, RUGGEDCOM M969, RUGGEDCOM M969F, RUGGEDCOM RMC30, RUGGEDCOM RMC8388 V4.X, RUGGEDCOM RMC8388 V5.X, RUGGEDCOM RP110, RUGGEDCOM RS1600, RUGGEDCOM RS1600F, RUGGEDCOM RS1600T, RUGGEDCOM RS400, RUGGEDCOM RS400F, RUGGEDCOM RS401, RUGGEDCOM RS416, RUGGEDCOM RS416F, RUGGEDCOM RS416P, RUGGEDCOM RS416PF, RUGGEDCOM RS416Pv2 V4.X, RUGGEDCOM RS416Pv2 V5.X, RUGGEDCOM RS416v2 V4.X, RUGGEDCOM RS416v2 V5.X, RUGGEDCOM RS8000, RUGGEDCOM RS8000A, RUGGEDCOM RS8000H, RUGGEDCOM RS8000T, RUGGEDCOM RS900, RUGGEDCOM RS900 (32M) V4.X, RUGGEDCOM RS900 (32M) V5.X, RUGGEDCOM RS900F, RUGGEDCOM RS900G, RUGGEDCOM RS900G (32M) V4.X, RUGGEDCOM RS900G (32M) V5.X, RUGGEDCOM RS900GF, RUGGEDCOM RS900GP, RUGGEDCOM RS900GPF, RUGGEDCOM RS900L, RUGGEDCOM RS900M-GETS-C01, RUGGEDCOM RS900M-GETS-XX, RUGGEDCOM RS900M-STND-C01, RUGGEDCOM RS900M-STND-XX, RUGGEDCOM RS900W, RUGGEDCOM RS910, RUGGEDCOM RS910L, RUGGEDCOM RS910W, RUGGEDCOM RS920L, RUGGEDCOM RS920W, RUGGEDCOM RS930L, RUGGEDCOM RS930W, RUGGEDCOM RS940G, RUGGEDCOM RS940GF, RUGGEDCOM RS969, RUGGEDCOM RSG2100, RUGGEDCOM RSG2100 (32M) V4.X, RUGGEDCOM RSG2100 (32M) V5.X, RUGGEDCOM RSG2100F, RUGGEDCOM RSG2100P, RUGGEDCOM RSG2100P (32M) V4.X, RUGGEDCOM RSG2100P (32M) V5.X, RUGGEDCOM RSG2100PF, RUGGEDCOM RSG2200, RUGGEDCOM RSG2200F, RUGGEDCOM RSG2288 V4.X, RUGGEDCOM RSG2288 V5.X, RUGGEDCOM RSG2300 V4.X, RUGGEDCOM RSG2300 V5.X, RUGGEDCOM RSG2300F, RUGGEDCOM RSG2300P V4.X, RUGGEDCOM RSG2300P V5.X, RUGGEDCOM RSG2300PF, RUGGEDCOM RSG2488 V4.X, RUGGEDCOM RSG2488 V5.X, RUGGEDCOM RSG2488F, RUGGEDCOM RSG907R, RUGGEDCOM RSG908C, RUGGEDCOM RSG909R, RUGGEDCOM RSG910C, RUGGEDCOM RSG920P V4.X, RUGGEDCOM RSG920P V5.X, RUGGEDCOM RSL910, RUGGEDCOM RST2228, RUGGEDCOM RST2228P, RUGGEDCOM RST916C, RUGGEDCOM RST916P. A timing attack, in a third-party component, could make the retrieval of the private key possible, used for encryption of sensitive data.
If a threat actor were to exploit this, the data integrity and security could be compromised. |
| A vulnerability in Cisco Integrated Management Controller could allow an unauthenticated, remote attacker to enumerate valid usernames within the vulnerable application.
The vulnerability is due to differences in authentication responses sent back from the application as part of an authentication attempt. An attacker could exploit this vulnerability by sending authentication requests to the affected application. A successful exploit could allow the attacker to confirm the names of administrative user accounts for use in further attacks.There are no workarounds that address this vulnerability. |
| there is a possible information disclosure due to side channel information disclosure. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In Legion of the Bouncy Castle BC before 1.61 and BC-FJA before 1.0.1.2, attackers can obtain sensitive information about a private exponent because of Observable Differences in Behavior to Error Inputs. This occurs in org.bouncycastle.crypto.encodings.OAEPEncoding. Sending invalid ciphertext that decrypts to a short payload in the OAEP Decoder could result in the throwing of an early exception, potentially leaking some information about the private exponent of the RSA private key performing the encryption. |
| SummaryThis advisory addresses a security vulnerability in Mautic related to the "Forget your password" functionality. This vulnerability could be exploited by unauthenticated users to enumerate valid usernames.
User Enumeration via Timing Attack: A user enumeration vulnerability exists in the "Forget your password" functionality. Differences in response times for existing and non-existing users, combined with a lack of request limiting, allow an attacker to determine the existence of usernames through a timing-based attack.
MitigationPlease update to a version that addresses this timing vulnerability, where password reset responses are normalized to respond at the same time regardless of user existence. |
| A specific authentication strategy allows to learn ids of PAM users associated with certain authentication types. |
| Botan before 3.6.0, when certain GCC versions are used, has a compiler-induced secret-dependent operation in lib/utils/donna128.h in donna128 (used in Chacha-Poly1305 and x25519). An addition can be skipped if a carry is not set. This was observed for GCC 11.3.0 with -O2 on MIPS, and GCC on x86-i386. (Only 32-bit processors can be affected.) |
| Botan before 3.6.0, when certain LLVM versions are used, has compiler-induced secret-dependent control flow in lib/utils/ghash/ghash.cpp in GHASH in AES-GCM. There is a branch instead of an XOR with carry. This was observed for Clang in LLVM 15 on RISC-V. |
| Windows Cryptographic Information Disclosure Vulnerability |
| user enumeration vulnerability in Daily Expense Manager v1.0. To exploit this vulnerability a POST request must be sent using the name parameter in /check.php |
| vLLM is an inference and serving engine for large language models (LLMs). Prior to version 0.9.0, when a new prompt is processed, if the PageAttention mechanism finds a matching prefix chunk, the prefill process speeds up, which is reflected in the TTFT (Time to First Token). These timing differences caused by matching chunks are significant enough to be recognized and exploited. This issue has been patched in version 0.9.0. |
| GNU GRUB (aka GRUB2) through 2.12 does not use a constant-time algorithm for grub_crypto_memcmp and thus allows side-channel attacks. |
| A minor information leak when running Screen with setuid-root privileges allows unprivileged users to deduce information about a path that would otherwise not be available.
Affected are older Screen versions, as well as version 5.0.0. |
| Vulnerability in the Oracle Enterprise Command Center Framework product of Oracle E-Business Suite (component: Diagnostics). Supported versions that are affected are ECC:11-13. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Enterprise Command Center Framework. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Enterprise Command Center Framework accessible data. CVSS 3.1 Base Score 4.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N). |
| EspoCRM is an Open Source Customer Relationship Management software. Prior to version 9.0.7, users can be sorted by their password hash. This flaw allows an attacker to make assumptions about the hash values of other users stored in the password column of the user table, based on the results of the sorted list of users. Although unlikely, if an attacker knows the hash value of their password, they can change the password and repeat the sorting until the other user's password hash is fully revealed. This issue is patched in version 9.0.7. |
