| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A use-after-free issue was addressed with improved memory management. This issue is fixed in Safari 26.5, macOS Tahoe 26.5. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| A use-after-free issue was addressed with improved memory management. This issue is fixed in Safari 26.5, iOS 26.5 and iPadOS 26.5, macOS Tahoe 26.5, tvOS 26.5, visionOS 26.5, watchOS 26.5. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| When BIG-IP PEM iRules are configured on a virtual server (iRules using commands starting with CLASSIFICATION::, CLASSIFY::, PEM::, PSC::, and the urlcatquery command), undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_ssl_module module when the ssl_verify_client directive is set to "on" or "optional," and the ssl_ocsp directive is set to "on" or the leaf parameters are configured with a resolver. With this configuration, an unauthenticated attacker can send requests along with conditions beyond its control that may cause a heap-use-after-free error in the NGINX worker process. This vulnerability may result in limited modification of data or the NGINX worker process restarting.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| When Bidirectional Forwarding Detection (BFD) is configured in Static and Dynamic routing protocols, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to stop processing BFD packets and cause the configured routing protocol to fail over. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Exim before 4.99.3, in certain GnuTLS configurations, has a remotely reachable use-after-free in the BDAT body parsing path. It is triggered when a client sends a TLS close_notify mid-body during a CHUNKING transfer, followed by a final cleartext byte on the same TCP connection. This can lead to heap corruption. An unauthenticated network attacker exploiting this vulnerability could execute arbitrary code. |
| Premiere Pro versions 26.0.2, 25.6.4 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| A use after free issue was addressed with improved memory management. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5, tvOS 26.5, watchOS 26.5. An attacker in a privileged network position may be able to perform denial-of-service attack using crafted Wi-Fi packets. |
| A use after free issue was addressed with improved memory management. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5, tvOS 26.5, visionOS 26.5, watchOS 26.5. A remote attacker may be able to cause unexpected system termination or corrupt kernel memory. |
| Use after free for some Linux kernel driver for the Intel(R) Ethernet 800 series before version 2.3.14 within Ring 0: Kernel may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (high) impacts. |
| Use after free in Windows Kernel-Mode Drivers allows an authorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix double free related to rereg_user_mr
If IB_MR_REREG_TRANS is set during rereg_user_mr, the
umem will be released and a new one will be allocated
in irdma_rereg_mr_trans. If any step of irdma_rereg_mr_trans
fails after the new umem is allocated, it releases the umem,
but does not set iwmr->region to NULL. The problem is that
this failure is propagated to the user, who will then call
ibv_dereg_mr (as they should). Then, the dereg_mr path will
see a non-NULL umem and attempt to call ib_umem_release again.
Fix this by setting iwmr->region to NULL after ib_umem_release.
Fixed: 5ac388db27c4 ("RDMA/irdma: Add support to re-register a memory region") |
| In the Linux kernel, the following vulnerability has been resolved:
reset: gpio: suppress bind attributes in sysfs
This is a special device that's created dynamically and is supposed to
stay in memory forever. We also currently don't have a devlink between
it and the actual reset consumer. Suppress sysfs bind attributes so that
user-space can't unbind the device because - as of now - it will cause a
use-after-free splat from any user that puts the reset control handle. |
| When using LookupCNAME with the cgo DNS resolver, a very long CNAME response can trigger a double-free of C memory and a crash. |
| Use after free in Views in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
procfs: fix possible double mmput() in do_procmap_query()
When user provides incorrectly sized buffer for build ID for PROCMAP_QUERY
we return with -ENAMETOOLONG error. After recent changes this condition
happens later, after we unlocked mmap_lock/per-VMA lock and did mmput(),
so original goto out is now wrong and will double-mmput() mm_struct. Fix
by jumping further to clean up only vm_file and name_buf. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix double brelse() the buffer of the extents path
In ext4_ext_try_to_merge_up(), set path[1].p_bh to NULL after it has been
released, otherwise it may be released twice. An example of what triggers
this is as follows:
split2 map split1
|--------|-------|--------|
ext4_ext_map_blocks
ext4_ext_handle_unwritten_extents
ext4_split_convert_extents
// path->p_depth == 0
ext4_split_extent
// 1. do split1
ext4_split_extent_at
|ext4_ext_insert_extent
| ext4_ext_create_new_leaf
| ext4_ext_grow_indepth
| le16_add_cpu(&neh->eh_depth, 1)
| ext4_find_extent
| // return -ENOMEM
|// get error and try zeroout
|path = ext4_find_extent
| path->p_depth = 1
|ext4_ext_try_to_merge
| ext4_ext_try_to_merge_up
| path->p_depth = 0
| brelse(path[1].p_bh) ---> not set to NULL here
|// zeroout success
// 2. update path
ext4_find_extent
// 3. do split2
ext4_split_extent_at
ext4_ext_insert_extent
ext4_ext_create_new_leaf
ext4_ext_grow_indepth
le16_add_cpu(&neh->eh_depth, 1)
ext4_find_extent
path[0].p_bh = NULL;
path->p_depth = 1
read_extent_tree_block ---> return err
// path[1].p_bh is still the old value
ext4_free_ext_path
ext4_ext_drop_refs
// path->p_depth == 1
brelse(path[1].p_bh) ---> brelse a buffer twice
Finally got the following WARRNING when removing the buffer from lru:
============================================
VFS: brelse: Trying to free free buffer
WARNING: CPU: 2 PID: 72 at fs/buffer.c:1241 __brelse+0x58/0x90
CPU: 2 PID: 72 Comm: kworker/u19:1 Not tainted 6.9.0-dirty #716
RIP: 0010:__brelse+0x58/0x90
Call Trace:
<TASK>
__find_get_block+0x6e7/0x810
bdev_getblk+0x2b/0x480
__ext4_get_inode_loc+0x48a/0x1240
ext4_get_inode_loc+0xb2/0x150
ext4_reserve_inode_write+0xb7/0x230
__ext4_mark_inode_dirty+0x144/0x6a0
ext4_ext_insert_extent+0x9c8/0x3230
ext4_ext_map_blocks+0xf45/0x2dc0
ext4_map_blocks+0x724/0x1700
ext4_do_writepages+0x12d6/0x2a70
[...]
============================================ |
| In the Linux kernel, the following vulnerability has been resolved:
net: wan: farsync: Fix use-after-free bugs caused by unfinished tasklets
When the FarSync T-series card is being detached, the fst_card_info is
deallocated in fst_remove_one(). However, the fst_tx_task or fst_int_task
may still be running or pending, leading to use-after-free bugs when the
already freed fst_card_info is accessed in fst_process_tx_work_q() or
fst_process_int_work_q().
A typical race condition is depicted below:
CPU 0 (cleanup) | CPU 1 (tasklet)
| fst_start_xmit()
fst_remove_one() | tasklet_schedule()
unregister_hdlc_device()|
| fst_process_tx_work_q() //handler
kfree(card) //free | do_bottom_half_tx()
| card-> //use
The following KASAN trace was captured:
==================================================================
BUG: KASAN: slab-use-after-free in do_bottom_half_tx+0xb88/0xd00
Read of size 4 at addr ffff88800aad101c by task ksoftirqd/3/32
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcb/0x5d0
? do_bottom_half_tx+0xb88/0xd00
kasan_report+0xb8/0xf0
? do_bottom_half_tx+0xb88/0xd00
do_bottom_half_tx+0xb88/0xd00
? _raw_spin_lock_irqsave+0x85/0xe0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx___hrtimer_run_queues+0x10/0x10
fst_process_tx_work_q+0x67/0x90
tasklet_action_common+0x1fa/0x720
? hrtimer_interrupt+0x31f/0x780
handle_softirqs+0x176/0x530
__irq_exit_rcu+0xab/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
...
Allocated by task 41 on cpu 3 at 72.330843s:
kasan_save_stack+0x24/0x50
kasan_save_track+0x17/0x60
__kasan_kmalloc+0x7f/0x90
fst_add_one+0x1a5/0x1cd0
local_pci_probe+0xdd/0x190
pci_device_probe+0x341/0x480
really_probe+0x1c6/0x6a0
__driver_probe_device+0x248/0x310
driver_probe_device+0x48/0x210
__device_attach_driver+0x160/0x320
bus_for_each_drv+0x101/0x190
__device_attach+0x198/0x3a0
device_initial_probe+0x78/0xa0
pci_bus_add_device+0x81/0xc0
pci_bus_add_devices+0x7e/0x190
enable_slot+0x9b9/0x1130
acpiphp_check_bridge.part.0+0x2e1/0x460
acpiphp_hotplug_notify+0x36c/0x3c0
acpi_device_hotplug+0x203/0xb10
acpi_hotplug_work_fn+0x59/0x80
...
Freed by task 41 on cpu 1 at 75.138639s:
kasan_save_stack+0x24/0x50
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x135/0x410
fst_remove_one+0x2ca/0x540
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0x364/0x530
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device+0xd/0x20
disable_slot+0x116/0x260
acpiphp_disable_and_eject_slot+0x4b/0x190
acpiphp_hotplug_notify+0x230/0x3c0
acpi_device_hotplug+0x203/0xb10
acpi_hotplug_work_fn+0x59/0x80
...
The buggy address belongs to the object at ffff88800aad1000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 28 bytes inside of
freed 1024-byte region
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xaad0
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x100000000000040(head|node=0|zone=1)
page_type: f5(slab)
raw: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000
head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 0100000000000003 ffffea00002ab401 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88800aad0f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88800aad0f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88800aad1000: fa fb
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/atmel-hlcdc: fix use-after-free of drm_crtc_commit after release
The atmel_hlcdc_plane_atomic_duplicate_state() callback was copying
the atmel_hlcdc_plane state structure without properly duplicating the
drm_plane_state. In particular, state->commit remained set to the old
state commit, which can lead to a use-after-free in the next
drm_atomic_commit() call.
Fix this by calling
__drm_atomic_helper_duplicate_plane_state(), which correctly clones
the base drm_plane_state (including the ->commit pointer).
It has been seen when closing and re-opening the device node while
another DRM client (e.g. fbdev) is still attached:
=============================================================================
BUG kmalloc-64 (Not tainted): Poison overwritten
-----------------------------------------------------------------------------
0xc611b344-0xc611b344 @offset=836. First byte 0x6a instead of 0x6b
FIX kmalloc-64: Restoring Poison 0xc611b344-0xc611b344=0x6b
Allocated in drm_atomic_helper_setup_commit+0x1e8/0x7bc age=178 cpu=0
pid=29
drm_atomic_helper_setup_commit+0x1e8/0x7bc
drm_atomic_helper_commit+0x3c/0x15c
drm_atomic_commit+0xc0/0xf4
drm_framebuffer_remove+0x4cc/0x5a8
drm_mode_rmfb_work_fn+0x6c/0x80
process_one_work+0x12c/0x2cc
worker_thread+0x2a8/0x400
kthread+0xc0/0xdc
ret_from_fork+0x14/0x28
Freed in drm_atomic_helper_commit_hw_done+0x100/0x150 age=8 cpu=0
pid=169
drm_atomic_helper_commit_hw_done+0x100/0x150
drm_atomic_helper_commit_tail+0x64/0x8c
commit_tail+0x168/0x18c
drm_atomic_helper_commit+0x138/0x15c
drm_atomic_commit+0xc0/0xf4
drm_atomic_helper_set_config+0x84/0xb8
drm_mode_setcrtc+0x32c/0x810
drm_ioctl+0x20c/0x488
sys_ioctl+0x14c/0xc20
ret_fast_syscall+0x0/0x54
Slab 0xef8bc360 objects=21 used=16 fp=0xc611b7c0
flags=0x200(workingset|zone=0)
Object 0xc611b340 @offset=832 fp=0xc611b7c0 |
| In PHP versions 8.2.* before 8.2.31, 8.3.* before 8.3.31, 8.4.* before 8.4.21, and 8.5.* before 8.5.6, the SOAP extension's object deduplication mechanism stores pointers to PHP objects in a global map without incrementing their reference counts. When an apache:Map node contains duplicate keys, processing the second entry overwrites the first in the temporary result map, freeing the original PHP object while its stale pointer remains in the map. A subsequent href reference to the freed node can copy the dangling pointer into the result. As PHP string allocations can reclaim the freed memory region, an attacker with control over the SOAP request body can exploit this use-after-free to achieve remote code execution. |
