| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix constant blinding for PROBE_MEM32 stores
BPF_ST | BPF_PROBE_MEM32 immediate stores are not handled by
bpf_jit_blind_insn(), allowing user-controlled 32-bit immediates to
survive unblinded into JIT-compiled native code when bpf_jit_harden >= 1.
The root cause is that convert_ctx_accesses() rewrites BPF_ST|BPF_MEM
to BPF_ST|BPF_PROBE_MEM32 for arena pointer stores during verification,
before bpf_jit_blind_constants() runs during JIT compilation. The
blinding switch only matches BPF_ST|BPF_MEM (mode 0x60), not
BPF_ST|BPF_PROBE_MEM32 (mode 0xa0). The instruction falls through
unblinded.
Add BPF_ST|BPF_PROBE_MEM32 cases to bpf_jit_blind_insn() alongside the
existing BPF_ST|BPF_MEM cases. The blinding transformation is identical:
load the blinded immediate into BPF_REG_AX via mov+xor, then convert
the immediate store to a register store (BPF_STX).
The rewritten STX instruction must preserve the BPF_PROBE_MEM32 mode so
the architecture JIT emits the correct arena addressing (R12-based on
x86-64). Cannot use the BPF_STX_MEM() macro here because it hardcodes
BPF_MEM mode; construct the instruction directly instead. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/reg_sr: Fix leak on xa_store failure
Free the newly allocated entry when xa_store() fails to avoid a memory
leak on the error path.
v2: use goto fail_free. (Bala)
(cherry picked from commit 6bc6fec71ac45f52db609af4e62bdb96b9f5fadb) |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: Fix circular locking dependency in rds_tcp_tune
syzbot reported a circular locking dependency in rds_tcp_tune() where
sk_net_refcnt_upgrade() is called while holding the socket lock:
======================================================
WARNING: possible circular locking dependency detected
======================================================
kworker/u10:8/15040 is trying to acquire lock:
ffffffff8e9aaf80 (fs_reclaim){+.+.}-{0:0},
at: __kmalloc_cache_noprof+0x4b/0x6f0
but task is already holding lock:
ffff88805a3c1ce0 (k-sk_lock-AF_INET6){+.+.}-{0:0},
at: rds_tcp_tune+0xd7/0x930
The issue occurs because sk_net_refcnt_upgrade() performs memory
allocation (via get_net_track() -> ref_tracker_alloc()) while the
socket lock is held, creating a circular dependency with fs_reclaim.
Fix this by moving sk_net_refcnt_upgrade() outside the socket lock
critical section. This is safe because the fields modified by the
sk_net_refcnt_upgrade() call (sk_net_refcnt, ns_tracker) are not
accessed by any concurrent code path at this point.
v2:
- Corrected fixes tag
- check patch line wrap nits
- ai commentary nits |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: Fix a locking bug
Make sure that wl->mutex is locked before it is unlocked. This has been
detected by the Clang thread-safety analyzer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/configfs: Free ctx_restore_mid_bb in release
ctx_restore_mid_bb memory is allocated in wa_bb_store(), but
xe_config_device_release() only frees ctx_restore_post_bb.
Free ctx_restore_mid_bb[0].cs as well to avoid leaking the allocation
when the configfs device is removed.
(cherry picked from commit a235e7d0098337c3f2d1e8f3610c719a589e115f) |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: Fix interrupt storm after receiving bad if_id in IRQ handler
Commit 31a7a0bbeb00 ("dpaa2-switch: add bounds check for if_id in IRQ
handler") introduces a range check for if_id to avoid an out-of-bounds
access. If an out-of-bounds if_id is detected, the interrupt status is
not cleared. This may result in an interrupt storm.
Clear the interrupt status after detecting an out-of-bounds if_id to avoid
the problem.
Found by an experimental AI code review agent at Google. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Give up GC if MSG_PEEK intervened.
Igor Ushakov reported that GC purged the receive queue of
an alive socket due to a race with MSG_PEEK with a nice repro.
This is the exact same issue previously fixed by commit
cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK").
After GC was replaced with the current algorithm, the cited
commit removed the locking dance in unix_peek_fds() and
reintroduced the same issue.
The problem is that MSG_PEEK bumps a file refcount without
interacting with GC.
Consider an SCC containing sk-A and sk-B, where sk-A is
close()d but can be recv()ed via sk-B.
The bad thing happens if sk-A is recv()ed with MSG_PEEK from
sk-B and sk-B is close()d while GC is checking unix_vertex_dead()
for sk-A and sk-B.
GC thread User thread
--------- -----------
unix_vertex_dead(sk-A)
-> true <------.
\
`------ recv(sk-B, MSG_PEEK)
invalidate !! -> sk-A's file refcount : 1 -> 2
close(sk-B)
-> sk-B's file refcount : 2 -> 1
unix_vertex_dead(sk-B)
-> true
Initially, sk-A's file refcount is 1 by the inflight fd in sk-B
recvq. GC thinks sk-A is dead because the file refcount is the
same as the number of its inflight fds.
However, sk-A's file refcount is bumped silently by MSG_PEEK,
which invalidates the previous evaluation.
At this moment, sk-B's file refcount is 2; one by the open fd,
and one by the inflight fd in sk-A. The subsequent close()
releases one refcount by the former.
Finally, GC incorrectly concludes that both sk-A and sk-B are dead.
One option is to restore the locking dance in unix_peek_fds(),
but we can resolve this more elegantly thanks to the new algorithm.
The point is that the issue does not occur without the subsequent
close() and we actually do not need to synchronise MSG_PEEK with
the dead SCC detection.
When the issue occurs, close() and GC touch the same file refcount.
If GC sees the refcount being decremented by close(), it can just
give up garbage-collecting the SCC.
Therefore, we only need to signal the race during MSG_PEEK with
a proper memory barrier to make it visible to the GC.
Let's use seqcount_t to notify GC when MSG_PEEK occurs and let
it defer the SCC to the next run.
This way no locking is needed on the MSG_PEEK side, and we can
avoid imposing a penalty on every MSG_PEEK unnecessarily.
Note that we can retry within unix_scc_dead() if MSG_PEEK is
detected, but we do not do so to avoid hung task splat from
abusive MSG_PEEK calls. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ
Currently the code attempts to accept requests regardless of the
command identifier which may cause multiple requests to be marked
as pending (FLAG_DEFER_SETUP) which can cause more than
L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer
causing an overflow.
The spec is quite clear that the same identifier shall not be used on
subsequent requests:
'Within each signaling channel a different Identifier shall be used
for each successive request or indication.'
https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d
So this attempts to check if there are any channels pending with the
same identifier and rejects if any are found. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/privcmd: restrict usage in unprivileged domU
The Xen privcmd driver allows to issue arbitrary hypercalls from
user space processes. This is normally no problem, as access is
usually limited to root and the hypervisor will deny any hypercalls
affecting other domains.
In case the guest is booted using secure boot, however, the privcmd
driver would be enabling a root user process to modify e.g. kernel
memory contents, thus breaking the secure boot feature.
The only known case where an unprivileged domU is really needing to
use the privcmd driver is the case when it is acting as the device
model for another guest. In this case all hypercalls issued via the
privcmd driver will target that other guest.
Fortunately the privcmd driver can already be locked down to allow
only hypercalls targeting a specific domain, but this mode can be
activated from user land only today.
The target domain can be obtained from Xenstore, so when not running
in dom0 restrict the privcmd driver to that target domain from the
beginning, resolving the potential problem of breaking secure boot.
This is XSA-482
---
V2:
- defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich)
- wait in open() if target domain isn't known yet
- issue message in case no target domain found (Jan Beulich) |
| pyLoad is a free and open-source download manager written in Python. In 0.5.0b3.dev96 and earlier, the ADMIN_ONLY_OPTIONS protection mechanism restricts security-critical configuration values (reconnect scripts, SSL certs, proxy credentials) to admin-only access. However, this protection is only applied to core config options, not to plugin config options. The AntiVirus plugin stores an executable path (avfile) in its config, which is passed directly to subprocess.Popen(). A non-admin user with SETTINGS permission can change this path to achieve remote code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix NULL deref in mesh_matches_local()
mesh_matches_local() unconditionally dereferences ie->mesh_config to
compare mesh configuration parameters. When called from
mesh_rx_csa_frame(), the parsed action-frame elements may not contain a
Mesh Configuration IE, leaving ie->mesh_config NULL and triggering a
kernel NULL pointer dereference.
The other two callers are already safe:
- ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before
calling mesh_matches_local()
- mesh_plink_get_event() is only reached through
mesh_process_plink_frame(), which checks !elems->mesh_config, too
mesh_rx_csa_frame() is the only caller that passes raw parsed elements
to mesh_matches_local() without guarding mesh_config. An adjacent
attacker can exploit this by sending a crafted CSA action frame that
includes a valid Mesh ID IE but omits the Mesh Configuration IE,
crashing the kernel.
The captured crash log:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events_unbound cfg80211_wiphy_work
[...]
Call Trace:
<TASK>
? __pfx_mesh_matches_local (net/mac80211/mesh.c:65)
ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686)
[...]
ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802)
[...]
cfg80211_wiphy_work (net/wireless/core.c:426)
process_one_work (net/kernel/workqueue.c:3280)
? assign_work (net/kernel/workqueue.c:1219)
worker_thread (net/kernel/workqueue.c:3352)
? __pfx_worker_thread (net/kernel/workqueue.c:3385)
kthread (net/kernel/kthread.c:436)
[...]
ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255)
</TASK>
This patch adds a NULL check for ie->mesh_config at the top of
mesh_matches_local() to return false early when the Mesh Configuration
IE is absent. |
| In the Linux kernel, the following vulnerability has been resolved:
nfnetlink_osf: validate individual option lengths in fingerprints
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path. |
| In the Linux kernel, the following vulnerability has been resolved:
icmp: fix NULL pointer dereference in icmp_tag_validation()
icmp_tag_validation() unconditionally dereferences the result of
rcu_dereference(inet_protos[proto]) without checking for NULL.
The inet_protos[] array is sparse -- only about 15 of 256 protocol
numbers have registered handlers. When ip_no_pmtu_disc is set to 3
(hardened PMTU mode) and the kernel receives an ICMP Fragmentation
Needed error with a quoted inner IP header containing an unregistered
protocol number, the NULL dereference causes a kernel panic in
softirq context.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:icmp_unreach (net/ipv4/icmp.c:1085 net/ipv4/icmp.c:1143)
Call Trace:
<IRQ>
icmp_rcv (net/ipv4/icmp.c:1527)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207)
ip_local_deliver_finish (net/ipv4/ip_input.c:242)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
__netif_receive_skb_one_core (net/core/dev.c:6164)
process_backlog (net/core/dev.c:6628)
handle_softirqs (kernel/softirq.c:561)
</IRQ>
Add a NULL check before accessing icmp_strict_tag_validation. If the
protocol has no registered handler, return false since it cannot
perform strict tag validation. |
| In the Linux kernel, the following vulnerability has been resolved:
nf_tables: nft_dynset: fix possible stateful expression memleak in error path
If cloning the second stateful expression in the element via GFP_ATOMIC
fails, then the first stateful expression remains in place without being
released.
unreferenced object (percpu) 0x607b97e9cab8 (size 16):
comm "softirq", pid 0, jiffies 4294931867
hex dump (first 16 bytes on cpu 3):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
backtrace (crc 0):
pcpu_alloc_noprof+0x453/0xd80
nft_counter_clone+0x9c/0x190 [nf_tables]
nft_expr_clone+0x8f/0x1b0 [nf_tables]
nft_dynset_new+0x2cb/0x5f0 [nf_tables]
nft_rhash_update+0x236/0x11c0 [nf_tables]
nft_dynset_eval+0x11f/0x670 [nf_tables]
nft_do_chain+0x253/0x1700 [nf_tables]
nft_do_chain_ipv4+0x18d/0x270 [nf_tables]
nf_hook_slow+0xaa/0x1e0
ip_local_deliver+0x209/0x330 |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: call set_notification_done() without proc lock
Consider the following sequence of events on a death listener:
1. The remote process dies and sends a BR_DEAD_BINDER message.
2. The local process invokes the BC_CLEAR_DEATH_NOTIFICATION command.
3. The local process then invokes the BC_DEAD_BINDER_DONE.
Then, the kernel will reply to the BC_DEAD_BINDER_DONE command with a
BR_CLEAR_DEATH_NOTIFICATION_DONE reply using push_work_if_looper().
However, this can result in a deadlock if the current thread is not a
looper. This is because dead_binder_done() still holds the proc lock
during set_notification_done(), which called push_work_if_looper().
Normally, push_work_if_looper() takes the thread lock, which is fine to
take under the proc lock. But if the current thread is not a looper,
then it falls back to delivering the reply to the process work queue,
which involves taking the proc lock. Since the proc lock is already
held, this is a deadlock.
Fix this by releasing the proc lock during set_notification_done(). It
was not intentional that it was held during that function to begin with.
I don't think this ever happens in Android because BC_DEAD_BINDER_DONE
is only invoked in response to BR_DEAD_BINDER messages, and the kernel
always delivers BR_DEAD_BINDER to a looper. So there's no scenario where
Android userspace will call BC_DEAD_BINDER_DONE on a non-looper thread. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE
When installing an emulated MMIO SPTE, do so *after* dropping/zapping the
existing SPTE (if it's shadow-present). While commit a54aa15c6bda3 was
right about it being impossible to convert a shadow-present SPTE to an
MMIO SPTE due to a _guest_ write, it failed to account for writes to guest
memory that are outside the scope of KVM.
E.g. if host userspace modifies a shadowed gPTE to switch from a memslot
to emulted MMIO and then the guest hits a relevant page fault, KVM will
install the MMIO SPTE without first zapping the shadow-present SPTE.
------------[ cut here ]------------
is_shadow_present_pte(*sptep)
WARNING: arch/x86/kvm/mmu/mmu.c:484 at mark_mmio_spte+0xb2/0xc0 [kvm], CPU#0: vmx_ept_stale_r/4292
Modules linked in: kvm_intel kvm irqbypass
CPU: 0 UID: 1000 PID: 4292 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:mark_mmio_spte+0xb2/0xc0 [kvm]
Call Trace:
<TASK>
mmu_set_spte+0x237/0x440 [kvm]
ept_page_fault+0x535/0x7f0 [kvm]
kvm_mmu_do_page_fault+0xee/0x1f0 [kvm]
kvm_mmu_page_fault+0x8d/0x620 [kvm]
vmx_handle_exit+0x18c/0x5a0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0x730
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47fa3f
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Only WARN in direct MMUs when overwriting shadow-present SPTE
Adjust KVM's sanity check against overwriting a shadow-present SPTE with a
another SPTE with a different target PFN to only apply to direct MMUs,
i.e. only to MMUs without shadowed gPTEs. While it's impossible for KVM
to overwrite a shadow-present SPTE in response to a guest write, writes
from outside the scope of KVM, e.g. from host userspace, aren't detected
by KVM's write tracking and so can break KVM's shadow paging rules.
------------[ cut here ]------------
pfn != spte_to_pfn(*sptep)
WARNING: arch/x86/kvm/mmu/mmu.c:3069 at mmu_set_spte+0x1e4/0x440 [kvm], CPU#0: vmx_ept_stale_r/872
Modules linked in: kvm_intel kvm irqbypass
CPU: 0 UID: 1000 PID: 872 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:mmu_set_spte+0x1e4/0x440 [kvm]
Call Trace:
<TASK>
ept_page_fault+0x535/0x7f0 [kvm]
kvm_mmu_do_page_fault+0xee/0x1f0 [kvm]
kvm_mmu_page_fault+0x8d/0x620 [kvm]
vmx_handle_exit+0x18c/0x5a0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0x730
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]--- |
| Privilege escalation in the Graphics: WebRender component. This vulnerability was fixed in Firefox 150, Firefox ESR 115.35, Firefox ESR 140.10, Thunderbird 150, and Thunderbird 140.10. |
| In versions <8.4.0, <8.3.2, <8.2.2, <8.1.3, <8.0.4, <7.13.6, <7.12.7, <7.11.7, and <7.10.10, the endpoints /api/apps/logs and /api/apps/:id/logs have a typo in the required permission check, allowing authenticated users without the proper permissions to read apps-engine logs. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, The CSVAgent allows providing a custom Pandas CSV read code. Due to lack of sanitization, an attacker can provide a command injection payload that will get interpolated and executed by the server. This vulnerability is fixed in 3.1.0. |
