| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in D-Link DIR-605L 2.13B01. This vulnerability affects the function formAdvNetwork of the file /goform/formAdvNetwork of the component POST Request Handler. Performing a manipulation of the argument curTime results in buffer overflow. Remote exploitation of the attack is possible. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| A Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in the advanced forwarding toolkit (evo-aftmand/evo-pfemand) of Juniper Networks Junos OS Evolved on PTX Series or QFX5000 Series allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS).An attacker sending crafted multicast packets will cause line cards running evo-aftmand/evo-pfemand to crash and restart or non-line card devices to crash and restart. Continued receipt and processing of these packets will sustain the Denial of Service (DoS) condition.
This issue affects Junos OS Evolved PTX Series:
* All versions before 22.4R3-S8-EVO,
* from 23.2 before 23.2R2-S5-EVO,
* from 23.4 before 23.4R2-EVO,
* from 24.2 before 24.2R2-EVO,
* from 24.4 before 24.4R2-EVO.
This issue affects Junos OS Evolved on QFX5000 Series:
* 22.2-EVO version before 22.2R3-S7-EVO,
* 22.4-EVO version before 22.4R3-S7-EVO,
* 23.2-EVO versions before 23.2R2-S4-EVO,
* 23.4-EVO versions before 23.4R2-S5-EVO,
* 24.2-EVO versions before 24.2R2-S1-EVO,
* 24.4-EVO versions before 24.4R1-S3-EVO, 24.4R2-EVO.
This issue does not affect Junos OS Evolved on QFX5000 Series versions before: 21.2R2-S1-EVO, 21.2R3-EVO, 21.3R2-EVO, 21.4R1-EVO, and 22.1R1-EVO. |
| A flaw has been found in D-Link DIR-605L 2.13B01. Affected by this issue is the function formSetMACFilter of the file /goform/formSetMACFilter of the component POST Request Handler. This manipulation of the argument curTime causes buffer overflow. The attack may be initiated remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was detected in D-Link DIR-605L 2.13B01. Affected by this vulnerability is the function formVirtualServ of the file /goform/formVirtualServ of the component POST Request Handler. The manipulation of the argument curTime results in buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| Heap buffer overflow in CertFromX509 via AuthorityKeyIdentifier size confusion. A heap buffer overflow occurs when converting an X.509 certificate internally due to incorrect size handling of the AuthorityKeyIdentifier extension. |
| nimiq-blockchain provides persistent block storage for Nimiq's Rust implementation. In 1.3.0 and earlier, block timestamp validation enforces that timestamp >= parent.timestamp for non-skip blocks and timestamp == parent.timestamp + MIN_PRODUCER_TIMEOUT for skip blocks, but there is no visible upper bound check against the wall clock. A malicious block-producing validator can set block timestamps arbitrarily far in the future. This directly affects reward calculations via Policy::supply_at() and batch_delay() in blockchain/src/reward.rs, inflating the monetary supply beyond the intended emission schedule. |
| OpenAirInterface Version 2.2.0 has a Buffer Overflow vulnerability in processing UplinkNASTransport containing Authentication Response containing a NAS PDU with oversize response (For example 100 byte). The response is decoded by AMF and passed to the AUSF component for verification. AUSF crashes on receiving this oversize response. This can prohibit users from further registration and verification and can cause Denial of Services (DoS). |
| D-Link DI-8300 v16.07.26A1 was discovered to contain a buffer overflow via the fx parameter in the jingx_asp function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| D-Link DI-8300 v16.07.26A1 was discovered to contain a buffer overflow via the ip parameter in the ip_position_asp function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| A segment fault (SEGV) flaw was found in libtiff that could be triggered by passing a crafted tiff file to the TIFFReadRGBATileExt() API. This flaw allows a remote attacker to cause a heap-buffer overflow, leading to a denial of service. |
| Mikrotik RouterOs before stable v7.6 was discovered to contain an out-of-bounds read in the snmp process. This vulnerability allows authenticated attackers to execute arbitrary code via a crafted packet. |
| A vulnerability has been found in D-Link DIR-605L 2.13B01. This affects the function formAdvFirewall of the file /goform/formAdvFirewall of the component POST Request Handler. Such manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| A buffer copy without checking size of input ('classic buffer overflow') vulnerability in Fortinet FortiSwitchAXFixed 1.0.0 through 1.0.1 may allow an unauthenticated attacker within the same adjacent network to execute unauthorized code or commands on the device via sending a crafted LLDP packet. |
| Two potential heap out-of-bounds write locations existed in DecodeObjectId() in wolfcrypt/src/asn.c. First, a bounds check only validates one available slot before writing two OID arc values (out[0] and out[1]), enabling a 2-byte out-of-bounds write when outSz equals 1. Second, multiple callers pass sizeof(decOid) (64 bytes on 64-bit platforms) instead of the element count MAX_OID_SZ (32), causing the function to accept crafted OIDs with 33 or more arcs that write past the end of the allocated buffer. |
| The Sleuth Kit through 4.14.0 contains an out-of-bounds read vulnerability in the ISO9660 filesystem parser where the parse_susp() function trusts len_id, len_des, and len_src fields from the disk image to memcpy data into a stack buffer without verifying that the source data falls within the parsed SUSP block. An attacker can craft a malicious ISO image that causes reads past the end of the SUSP data buffer, and a zero-length SUSP entry can trigger an infinite parsing loop. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings into the Component Model's utf16 or latin1+utf16 encodings improperly verified the alignment of reallocated strings. This meant that unaligned pointers could be passed to the host for transcoding which would trigger a host panic. This panic is possible to trigger from malicious guests which transfer very specific strings across components with specific addresses. Host panics are considered a DoS vector in Wasmtime as the panic conditions are controlled by the guest in this situation. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| osslsigncode is a tool that implements Authenticode signing and timestamping. Prior to 2.13, an integer underflow vulnerability exists in osslsigncode version 2.12 and earlier in the PE page-hash computation code (pe_page_hash_calc()). When page hash processing is performed on a PE file, the function subtracts hdrsize from pagesize without first validating that pagesize >= hdrsize. If a malicious PE file sets SizeOfHeaders (hdrsize) larger than SectionAlignment (pagesize), the subtraction underflows and produces a very large unsigned length. The code allocates a zero-filled buffer of pagesize bytes and then attempts to hash pagesize - hdrsize bytes from that buffer. After the underflow, this results in an out-of-bounds read from the heap and can crash the process. The vulnerability can be triggered while signing a malicious PE file with page hashing enabled (-ph), or while verifying a malicious signed PE file that already contains page hashes. Verification of an already signed file does not require the verifier to pass -ph. This vulnerability is fixed in 2.13. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime with its Winch (baseline) non-default compiler backend may allow properly constructed guest Wasm to access host memory outside of its linear-memory sandbox. This vulnerability requires use of the Winch compiler (-Ccompiler=winch). By default, Wasmtime uses its Cranelift backend, not Winch. With Winch, the same incorrect assumption is present in theory on both aarch64 and x86-64. The aarch64 case has an observed-working proof of concept, while the x86-64 case is theoretical and may not be reachable in practice. This Winch compiler bug can allow the Wasm guest to access memory before or after the linear-memory region, independently of whether pre- or post-guard regions are configured. The accessible range in the initial bug proof-of-concept is up to 32KiB before the start of memory, or ~4GiB after the start of memory, independently of the size of pre- or post-guard regions or the use of explicit or guard-region-based bounds checking. However, the underlying bug assumes a 32-bit memory offset stored in a 64-bit register has its upper bits cleared when it may not, and so closely related variants of the initial proof-of-concept may be able to access truly arbitrary memory in-process. This could result in a host process segmentation fault (DoS), an arbitrary data leak from the host process, or with a write, potentially an arbitrary RCE. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime contains a vulnerability where when transcoding a UTF-16 string to the latin1+utf16 component-model encoding it would incorrectly validate the byte length of the input string when performing a bounds check. Specifically the number of code units were checked instead of the byte length, which is twice the size of the code units. This vulnerability can cause the host to read beyond the end of a WebAssembly's linear memory in an attempt to transcode nonexistent bytes. In Wasmtime's default configuration this will read unmapped memory on a guard page, terminating the process with a segfault. Wasmtime can be configured, however, without guard pages which would mean that host memory beyond the end of linear memory may be read and interpreted as UTF-16. A host segfault is a denial-of-service vulnerability in Wasmtime, and possibly being able to read beyond the end of linear memory is additionally a vulnerability. Note that reading beyond the end of linear memory requires nonstandard configuration of Wasmtime, specifically with guard pages disabled. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
