| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NLnet Labs Unbound 1.6.2 up to and including version 1.25.0 has a denial of service vulnerability when compiled with DNSCrypt support ('--enable-dnscrypt'). A bad DNSCrypt query could underflow Unbound's DNSCrypt packet reading procedure that may lead to heap overflow. A malicious actor can exploit the vulnerability with a single bad DNSCrypt query that its decrypted plaintext consists entirely of '0x00' bytes and does not contain the expected '0x80' marker. Unbound would then start reading more bytes than necessary until it finds a non-'0x00' byte. Based on the underlying memory allocator and the memory layout, it could lead to heap overflow while reading followed by a crash. Likelihood of a crash is low, since it relies heavily on the underlying memory allocator and the memory layout. If the heap overflow does not happen, Unbound's later packet checks will deny the packet. Unbound 1.25.1 contains a patch with a fix to bound reading in the given buffer space. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use volume UUID in FS_OBJECT_ID_INFORMATION
Use sb->s_uuid for a proper volume identifier as the primary choice.
For filesystems that do not provide a UUID, fall back to stfs.f_fsid
obtained from vfs_statfs(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix undersized l_iclog_roundoff values
If the superblock doesn't list a log stripe unit, we set the incore log
roundoff value to 512. This leads to corrupt logs and unmountable
filesystems in generic/617 on a disk with 4k physical sectors...
XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c
XFS (sda1): Torn write (CRC failure) detected at log block 0x318e. Truncating head block from 0x3197.
XFS (sda1): failed to locate log tail
XFS (sda1): log mount/recovery failed: error -74
XFS (sda1): log mount failed
XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c
XFS (sda1): Ending clean mount
...on the current xfsprogs for-next which has a broken mkfs. xfs_info
shows this...
meta-data=/dev/sda1 isize=512 agcount=4, agsize=644992 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=1
= reflink=1 bigtime=1 inobtcount=1 nrext64=1
= exchange=1 metadir=1
data = bsize=4096 blocks=2579968, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1, parent=1
log =internal log bsize=4096 blocks=16384, version=2
= sectsz=4096 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
= rgcount=0 rgsize=268435456 extents
= zoned=0 start=0 reserved=0
...observe that the log section has sectsz=4096 sunit=0, which means
that the roundoff factor is 512, not 4096 as you'd expect. We should
fix mkfs not to generate broken filesystems, but anyone can fuzz the
ondisk superblock so we should be more cautious. I think the inadequate
logic predates commit a6a65fef5ef8d0, but that's clearly going to
require a different backport. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Check maxfield in hidpp_get_report_length()
Do not crash when a report has no fields.
Fake USB gadgets can send their own HID report descriptors and can define report
structures without valid fields. This can be used to crash the kernel over USB. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: Add missing platform data entries for SM8750
Two platform-data fields for SM8750 were missed:
- get_vpu_buffer_size = iris_vpu33_buf_size
Without this, the driver fails to allocate the required internal
buffers, leading to basic decode/encode failures during session
bring-up.
- max_core_mbps = ((7680 * 4320) / 256) * 60
Without this capability exposed, capability checks are incomplete and
v4l2-compliance for encoder fails. |
| Issue summary: During processing of a crafted CMS EnvelopedData message
with KeyAgreeRecipientInfo a NULL pointer dereference can happen.
Impact summary: Applications that process attacker-controlled CMS data may
crash before authentication or cryptographic operations occur resulting in
Denial of Service.
When a CMS EnvelopedData message that uses KeyAgreeRecipientInfo is
processed, the optional parameters field of KeyEncryptionAlgorithmIdentifier
is examined without checking for its presence. This results in a NULL
pointer dereference if the field is missing.
Applications and services that call CMS_decrypt() on untrusted input
(e.g., S/MIME processing or CMS-based protocols) are vulnerable.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: dt2815: add hardware detection to prevent crash
The dt2815 driver crashes when attached to I/O ports without actual
hardware present. This occurs because syzkaller or users can attach
the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl.
When no hardware exists at the specified port, inb() operations return
0xff (floating bus), but outb() operations can trigger page faults due
to undefined behavior, especially under race conditions:
BUG: unable to handle page fault for address: 000000007fffff90
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
RIP: 0010:dt2815_attach+0x6e0/0x1110
Add hardware detection by reading the status register before attempting
any write operations. If the read returns 0xff, assume no hardware is
present and fail the attach with -ENODEV. This prevents crashes from
outb() operations on non-existent hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: tegra - Add missing CRYPTO_ALG_ASYNC
The tegra crypto driver failed to set the CRYPTO_ALG_ASYNC on its
asynchronous algorithms, causing the crypto API to select them for users
that request only synchronous algorithms. This causes crashes (at
least). Fix this by adding the flag like what the other drivers do.
Also remove the unnecessary CRYPTO_ALG_TYPE_* flags, since those just
get ignored and overridden by the registration function anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Don't enumerate SPDIF1 at DAIO initialization
The recent refactoring of xfi driver changed the assignment of
atc->daios[] at atc_get_resources(); now it loops over all enum
DAIOTYP entries while it looped formerly only a part of them.
The problem is that the last entry, SPDIF1, is a special type that
is used only for hw20k1 CTSB073X model (as a replacement of SPDIFIO),
and there is no corresponding definition for hw20k2. Due to the lack
of the info, it caused a kernel crash on hw20k2, which was already
worked around by the commit b045ab3dff97 ("ALSA: ctxfi: Fix missing
SPDIFI1 index handling").
This patch addresses the root cause of the regression above properly,
simply by skipping the incorrect SPDIF1 type in the parser loop.
For making the change clearer, the code is slightly arranged, too. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: let send_done handle a completion without IB_SEND_SIGNALED
With smbdirect_send_batch processing we likely have requests without
IB_SEND_SIGNALED, which will be destroyed in the final request
that has IB_SEND_SIGNALED set.
If the connection is broken all requests are signaled
even without explicit IB_SEND_SIGNALED. |
| Apache Log4j Core's XmlLayout https://logging.apache.org/log4j/2.x/manual/layouts.html#XmlLayout , in versions up to and including 2.25.3, fails to sanitize characters forbidden by the XML 1.0 specification https://www.w3.org/TR/xml/#charsets producing invalid XML output whenever a log message or MDC value contains such characters.
The impact depends on the StAX implementation in use:
* JRE built-in StAX: Forbidden characters are silently written to the output, producing malformed XML. Conforming parsers must reject such documents with a fatal error, which may cause downstream log-processing systems to drop the affected records.
* Alternative StAX implementations (e.g., Woodstox https://github.com/FasterXML/woodstox , a transitive dependency of the Jackson XML Dataformat module): An exception is thrown during the logging call, and the log event is never delivered to its intended appender, only to Log4j's internal status logger.
Users are advised to upgrade to Apache Log4j Core 2.25.4, which corrects this issue by sanitizing forbidden characters before XML output. |
| The dns_db_findrdataset function in db.c in named in ISC BIND 9.4 before 9.4.3-P3, 9.5 before 9.5.1-P3, and 9.6 before 9.6.1-P1, when configured as a master server, allows remote attackers to cause a denial of service (assertion failure and daemon exit) via an ANY record in the prerequisite section of a crafted dynamic update message. |
| The default configuration of Microsoft Windows uses the Web Proxy Autodiscovery Protocol (WPAD) without static WPAD entries, which might allow remote attackers to intercept web traffic by registering a proxy server using WINS or DNS, then responding to WPAD requests, as demonstrated using Internet Explorer. NOTE: it could be argued that if an attacker already has control over WINS/DNS, then web traffic could already be intercepted by modifying WINS or DNS records, so this would not cross privilege boundaries and would not be a vulnerability. It has also been reported that DHCP is an alternate attack vector. |
| The SNMP service on ZyXEL Prestige routers, including P-660 and P-661 models with firmware 3.40(AGD.2) through 3.40(AHQ.3), has "public" as its default community for both (1) read and (2) write operations, which allows remote attackers to perform administrative actions via SNMP, as demonstrated by reading the Dynamic DNS service password or inserting an XSS sequence into the system.sysName.0 variable, which is displayed on the System Status page. |
| The default configuration of VMware Workstation 6.0.2, VMware Player 2.0.x before 2.0.3, and VMware ACE 2.0.x before 2.0.1 makes the console of the guest OS accessible through anonymous VIX API calls, which has unknown impact and attack vectors. |
| Mozilla Firefox 2.0.0.1 and earlier does not prompt users before saving bookmarklets, which allows remote attackers to bypass the same-domain policy by tricking a user into saving a bookmarklet with a data: scheme, which is executed in the context of the last visited web page. |
| The default configuration in OpenAFS 1.4.x before 1.4.4 and 1.5.x before 1.5.17 supports setuid programs within the local cell, which might allow attackers to gain privileges by spoofing a response to an AFS cache manager FetchStatus request, and setting setuid and root ownership for files in the cache. |
| IBM WebSphere Process Server (WPS) 6.1.2 before 6.1.2.3 and 6.2 before 6.2.0.1 does not properly restrict configuration data during an export of the cluster configuration file from the administrative console, which allows remote authenticated users to obtain the (1) JMSAPI, (2) ESCALATION, and (3) MAILSESSION (aka mail session) cleartext passwords via vectors involving access to a cluster member. |
| Incomplete blacklist vulnerability in upload_img_cgi.php in Simple PHP Blog before 0.5.1 allows remote attackers to upload dangerous files and execute arbitrary code, as demonstrated by a filename ending in .php. or a .htaccess file, a different vector than CVE-2005-2733. NOTE: the vulnerability was also present in a 0.5.1 download available in the early morning of 20070923. NOTE: the original 20070920 disclosure provided an incorrect filename, img_upload_cgi.php. |
| Microsoft Windows does not properly enforce the Autorun and NoDriveTypeAutoRun registry values, which allows physically proximate attackers to execute arbitrary code by (1) inserting CD-ROM media, (2) inserting DVD media, (3) connecting a USB device, and (4) connecting a Firewire device; (5) allows user-assisted remote attackers to execute arbitrary code by mapping a network drive; and allows user-assisted attackers to execute arbitrary code by clicking on (6) an icon under My Computer\Devices with Removable Storage and (7) an option in an AutoPlay dialog, related to the Autorun.inf file. NOTE: vectors 1 and 3 on Vista are already covered by CVE-2008-0951. |
