| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An incorrectly placed cast from bytes to int allowed for server-side panic in the AES-GCM packet decoder for well-crafted inputs. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Prevent ubuf size overflow
The ubuf size calculation may overflow, resulting in an undersized
allocation and possible memory corruption.
Use check_add_overflow() helpers to validate the size calculation before
allocation. |
| Rsync version 3.4.2 and prior contain an integer overflow vulnerability in the compressed-token decoder where a 32-bit signed counter is not checked for overflow, allowing a malicious sender to trigger an overflow that causes the receiver process to read and return data from outside the intended buffer bounds. Attackers can exploit this vulnerability to disclose process memory contents including environment variables, passwords, heap and stack data, and library memory pointers, significantly reducing ASLR effectiveness and facilitating further exploitation. |
| A potential security vulnerability has been identified in the HP Linux Imaging and Printing Software. This potential vulnerability may allow escalation of privileges and/or arbitrary code execution via an integer overflow in the hpcups processing path when handling crafted print data. |
| go-ntlmssp is a Go package that provides NTLM/Negotiate authentication over HTTP. Prior to version 0.1.1, a malicious NTLM challenge message can causes an slice out of bounds panic, which can crash any Go process using `ntlmssp.Negotiator` as an HTTP transport. Version 0.1.1 patches the issue. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to version 4.2.0, the bounds check byteOffset + dataSize > fileSize uses U32 addition that wraps around on overflow. An attacker-crafted DataPacket with byteOffset=0xFFFFFF9C and dataSize=100 overflows to 0, bypassing the check entirely. The subsequent file write proceeds at the original ~4GB offset. Additionally, Svc/FileUplink/File.cpp:20-31 performs no sanitization on the destination file path. Combined, these allow writing arbitrary data to any file at any offset. The impact is arbitrary file write leading to remote code execution on embedded targets. Note that this is a logic bug. ASAN does not detect it because all memory accesses are within valid buffers — the corruption occurs in file I/O. Version 4.2.0 contains a patch. No known workarounds are available. |
| A flaw was found in libarchive. On 32-bit systems, an integer overflow vulnerability exists in the zisofs block pointer allocation logic. A remote attacker can exploit this by providing a specially crafted ISO9660 image, which can lead to a heap buffer overflow. This could potentially allow for arbitrary code execution on the affected system. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: handle wraparound when searching for blocks for indirect mapped blocks
Commit 4865c768b563 ("ext4: always allocate blocks only from groups
inode can use") restricts what blocks will be allocated for indirect
block based files to block numbers that fit within 32-bit block
numbers.
However, when using a review bot running on the latest Gemini LLM to
check this commit when backporting into an LTS based kernel, it raised
this concern:
If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal
group was populated via stream allocation from s_mb_last_groups),
then start will be >= ngroups.
Does this allow allocating blocks beyond the 32-bit limit for
indirect block mapped files? The commit message mentions that
ext4_mb_scan_groups_linear() takes care to not select unsupported
groups. However, its loop uses group = *start, and the very first
iteration will call ext4_mb_scan_group() with this unsupported
group because next_linear_group() is only called at the end of the
iteration.
After reviewing the code paths involved and considering the LLM
review, I determined that this can happen when there is a file system
where some files/directories are extent-mapped and others are
indirect-block mapped. To address this, add a safety clamp in
ext4_mb_scan_groups(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: Fix overflow when accumulating packets
Add a check to ensure that `x25_sock.fraglen` does not overflow.
The `fraglen` also needs to be resetted when purging `fragment_queue` in
`x25_clear_queues()`. |
| NVIDIA Triton Inference Server contains a vulnerability where an attacker could cause an integer overflow. A successful exploit of this vulnerability might lead to denial of service. |
| NVIDIA Triton Inference Server contains a vulnerability in the DALI backend where an attacker could cause an integer overflow. A successful exploit of this vulnerability might lead to code execution, data tampering, or denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_mass_storage: Fix potential integer overflow in check_command_size_in_blocks()
The `check_command_size_in_blocks()` function calculates the data size
in bytes by left shifting `common->data_size_from_cmnd` by the block
size (`common->curlun->blkbits`). However, it does not validate whether
this shift operation will cause an integer overflow.
Initially, the block size is set up in `fsg_lun_open()` , and the
`common->data_size_from_cmnd` is set up in `do_scsi_command()`. During
initialization, there is no integer overflow check for the interaction
between two variables.
So if a malicious USB host sends a SCSI READ or WRITE command
requesting a large amount of data (`common->data_size_from_cmnd`), the
left shift operation can wrap around. This results in a truncated data
size, which can bypass boundary checks and potentially lead to memory
corruption or out-of-bounds accesses.
Fix this by using the check_shl_overflow() macro to safely perform the
shift and catch any overflows. |
| A flaw was found in the libtiff library. A remote attacker could exploit a signed integer overflow vulnerability in the putcontig8bitYCbCr44tile function by providing a specially crafted TIFF file. This flaw can lead to an out-of-bounds heap write due to incorrect memory pointer calculations, potentially causing a denial of service (application crash) or arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: avoid overflows in ip6_datagram_send_ctl()
Yiming Qian reported :
<quote>
I believe I found a locally triggerable kernel bug in the IPv6 sendmsg
ancillary-data path that can panic the kernel via `skb_under_panic()`
(local DoS).
The core issue is a mismatch between:
- a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type
`__u16`) and
- a pointer to the *last* provided destination-options header (`opt->dst1opt`)
when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided.
- `include/net/ipv6.h`:
- `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible).
(lines 291-307, especially 298)
- `net/ipv6/datagram.c:ip6_datagram_send_ctl()`:
- Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen`
without rejecting duplicates. (lines 909-933)
- `net/ipv6/ip6_output.c:__ip6_append_data()`:
- Uses `opt->opt_flen + opt->opt_nflen` to compute header
sizes/headroom decisions. (lines 1448-1466, especially 1463-1465)
- `net/ipv6/ip6_output.c:__ip6_make_skb()`:
- Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero.
(lines 1930-1934)
- `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`:
- Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the
pointed-to header). (lines 1179-1185 and 1206-1211)
1. `opt_flen` is a 16-bit accumulator:
- `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr */`.
2. `ip6_datagram_send_ctl()` accepts *repeated* `IPV6_DSTOPTS` cmsgs
and increments `opt_flen` each time:
- In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`:
- It computes `len = ((hdr->hdrlen + 1) << 3);`
- It checks `CAP_NET_RAW` using `ns_capable(net->user_ns,
CAP_NET_RAW)`. (line 922)
- Then it does:
- `opt->opt_flen += len;` (line 927)
- `opt->dst1opt = hdr;` (line 928)
There is no duplicate rejection here (unlike the legacy
`IPV6_2292DSTOPTS` path which rejects duplicates at
`net/ipv6/datagram.c:901-904`).
If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps
while `dst1opt` still points to a large (2048-byte)
destination-options header.
In the attached PoC (`poc.c`):
- 32 cmsgs with `hdrlen=255` => `len = (255+1)*8 = 2048`
- 1 cmsg with `hdrlen=0` => `len = 8`
- Total increment: `32*2048 + 8 = 65544`, so `(__u16)opt_flen == 8`
- The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header.
3. The transmit path sizes headers using the wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1463-1465`:
- `headersize = sizeof(struct ipv6hdr) + (opt ? opt->opt_flen +
opt->opt_nflen : 0) + ...;`
With wrapped `opt_flen`, `headersize`/headroom decisions underestimate
what will be pushed later.
4. When building the final skb, the actual push length comes from
`dst1opt` and is not limited by wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1930-1934`:
- `if (opt->opt_flen) proto = ipv6_push_frag_opts(skb, opt, proto);`
- In `net/ipv6/exthdrs.c:1206-1211`, `ipv6_push_frag_opts()` pushes
`dst1opt` via `ipv6_push_exthdr()`.
- In `net/ipv6/exthdrs.c:1179-1184`, `ipv6_push_exthdr()` does:
- `skb_push(skb, ipv6_optlen(opt));`
- `memcpy(h, opt, ipv6_optlen(opt));`
With insufficient headroom, `skb_push()` underflows and triggers
`skb_under_panic()` -> `BUG()`:
- `net/core/skbuff.c:2669-2675` (`skb_push()` calls `skb_under_panic()`)
- `net/core/skbuff.c:207-214` (`skb_panic()` ends in `BUG()`)
- The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target
netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`).
- Root (or any task with `CAP_NET_RAW`) can trigger this without user
namespaces.
- An unprivileged `uid=1000` user can trigger this if unprivileged
user namespaces are enabled and it can create a userns+netns to obtain
namespaced `CAP_NET_RAW` (the attached PoC does this).
- Local denial of service: kernel BUG/panic (system crash).
-
---truncated--- |
| Integer overflow in the Widget: Win32 component. This vulnerability was fixed in Firefox 151, Firefox ESR 140.11, Thunderbird 151, and Thunderbird 140.11. |
| Integer overflow in the Networking: JAR component. This vulnerability was fixed in Firefox 151, Firefox ESR 140.11, Thunderbird 151, and Thunderbird 140.11. |
| A flaw was found in glib. This vulnerability allows a heap buffer overflow and denial-of-service (DoS) via an integer overflow in GLib's GIO (GLib Input/Output) escape_byte_string() function when processing malicious file or remote filesystem attribute values. |
| A flaw was found in GLib (Gnome Lib). This vulnerability allows a remote attacker to cause heap corruption, leading to a denial of service or potential code execution via a buffer-underflow in the GVariant parser when processing maliciously crafted input strings. |
| A flaw was found in Corosync. An integer overflow vulnerability in Corosync's join message sanity validation allows a remote, unauthenticated attacker to send crafted User Datagram Protocol (UDP) packets. This can cause the service to crash, leading to a denial of service. This vulnerability specifically affects Corosync deployments configured to use totemudp/totemudpu mode. |
| Kitty is a cross-platform GPU based terminal. In versions 0.46.2 and below, the handle_compose_command() function in kitty/graphics.c performs bounds validation on composition offsets using unsigned 32-bit arithmetic that is subject to integer wrapping, potentially leading to Heap Buffer Over-Read/Write. An attacker who can write escape sequences to a kitty terminal (e.g., via a malicious file, SSH login banner, or piped content) can supply crafted x_offset/y_offset values that pass the bounds check after wrapping but cause massive out-of-bounds heap memory access in compose_rectangles(). No user interaction is required. No non-default configuration is required. The attacker only needs the ability to produce output in a kitty terminal window. This issue has been fixed in version 0.47.0. |
