| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NLnet Labs Unbound up to and including version 1.25.0 has a vulnerability in the jostle logic that could defeat its purpose and degrade resolution performance. Retransmits of the same query could renew the age of slow running queries and not allow the jostle logic to see them as aged and potential targets for replacement with new queries. An adversary who can query a vulnerable Unbound and who can control a domain name server that replies slowly and/or maliciously to Unbound's queries can exploit the vulnerability and degrade the resolution performance of Unbound. When Unbound's 'num-queries-per-thread' reaches its limit, the jostle logic kicks in. When a new query comes in, half of the available queries that are also slow to resolve are candidates for replacement. The vulnerability then happens because duplicate queries that need resolution would skew the aging result by using the timestamp of the latest duplicate query instead of the original one that started the resolution effort. Cache and local data response performance remains unaffected. Coordinated attacks could raise this to a denial of resolution service. Unbound 1.25.1 contains a patch with a fix to attach an initial, non-updatable start time for incoming queries that allow the jostle logic to work as intended. |
| Issue summary: The POLY1305 MAC (message authentication code) implementation
contains a bug that might corrupt the internal state of applications running
on PowerPC CPU based platforms if the CPU provides vector instructions.
Impact summary: If an attacker can influence whether the POLY1305 MAC
algorithm is used, the application state might be corrupted with various
application dependent consequences.
The POLY1305 MAC (message authentication code) implementation in OpenSSL for
PowerPC CPUs restores the contents of vector registers in a different order
than they are saved. Thus the contents of some of these vector registers
are corrupted when returning to the caller. The vulnerable code is used only
on newer PowerPC processors supporting the PowerISA 2.07 instructions.
The consequences of this kind of internal application state corruption can
be various - from no consequences, if the calling application does not
depend on the contents of non-volatile XMM registers at all, to the worst
consequences, where the attacker could get complete control of the application
process. However unless the compiler uses the vector registers for storing
pointers, the most likely consequence, if any, would be an incorrect result
of some application dependent calculations or a crash leading to a denial of
service.
The POLY1305 MAC algorithm is most frequently used as part of the
CHACHA20-POLY1305 AEAD (authenticated encryption with associated data)
algorithm. The most common usage of this AEAD cipher is with TLS protocol
versions 1.2 and 1.3. If this cipher is enabled on the server a malicious
client can influence whether this AEAD cipher is used. This implies that
TLS server applications using OpenSSL can be potentially impacted. However
we are currently not aware of any concrete application that would be affected
by this issue therefore we consider this a Low severity security issue. |
| In the Linux kernel, the following vulnerability has been resolved:
x86-64: rename misleadingly named '__copy_user_nocache()' function
This function was a masterclass in bad naming, for various historical
reasons.
It claimed to be a non-cached user copy. It is literally _neither_ of
those things. It's a specialty memory copy routine that uses
non-temporal stores for the destination (but not the source), and that
does exception handling for both source and destination accesses.
Also note that while it works for unaligned targets, any unaligned parts
(whether at beginning or end) will not use non-temporal stores, since
only words and quadwords can be non-temporal on x86.
The exception handling means that it _can_ be used for user space
accesses, but not on its own - it needs all the normal "start user space
access" logic around it.
But typically the user space access would be the source, not the
non-temporal destination. That was the original intention of this,
where the destination was some fragile persistent memory target that
needed non-temporal stores in order to catch machine check exceptions
synchronously and deal with them gracefully.
Thus that non-descriptive name: one use case was to copy from user space
into a non-cached kernel buffer. However, the existing users are a mix
of that intended use-case, and a couple of random drivers that just did
this as a performance tweak.
Some of those random drivers then actively misused the user copying
version (with STAC/CLAC and all) to do kernel copies without ever even
caring about the exception handling, _just_ for the non-temporal
destination.
Rename it as a first small step to actually make it halfway sane, and
change the prototype to be more normal: it doesn't take a user pointer
unless the caller has done the proper conversion, and the argument size
is the full size_t (it still won't actually copy more than 4GB in one
go, but there's also no reason to silently truncate the size argument in
the caller).
Finally, use this now sanely named function in the NTB code, which
mis-used a user copy version (with STAC/CLAC and all) of this interface
despite it not actually being a user copy at all. |
| In the Linux kernel, the following vulnerability has been resolved:
PM: sleep: Drop spurious WARN_ON() from pm_restore_gfp_mask()
Commit 35e4a69b2003f ("PM: sleep: Allow pm_restrict_gfp_mask()
stacking") introduced refcount-based GFP mask management that warns
when pm_restore_gfp_mask() is called with saved_gfp_count == 0.
Some hibernation paths call pm_restore_gfp_mask() defensively where
the GFP mask may or may not be restricted depending on the execution
path. For example, the uswsusp interface invokes it in
SNAPSHOT_CREATE_IMAGE, SNAPSHOT_UNFREEZE, and snapshot_release().
Before the stacking change this was a silent no-op; it now triggers
a spurious WARNING.
Remove the WARN_ON() wrapper from the !saved_gfp_count check while
retaining the check itself, so that defensive calls remain harmless
without producing false warnings.
[ rjw: Subject tweak ] |
| free5GC AMF provides Access & Mobility Management Function (AMF) for free5GC, an an open-source project for 5th generation (5G) mobile core networks. Prior to version 1.4.3, the `HTTPUEContextTransfer` handler in `internal/sbi/api_communication.go` does not include a `default` case in the `Content-Type` switch statement. When a request arrives with an unsupported `Content-Type`, the deserialization step is silently skipped, `err` remains `nil`, and the processor is invoked with a completely uninitialized `UeContextTransferRequest` object. Version 1.4.3 contains a fix. |
| Other issue in the Storage: IndexedDB component. This vulnerability was fixed in Firefox 150, Firefox ESR 140.10, Thunderbird 150, and Thunderbird 140.10. |
| fast-jwt provides fast JSON Web Token (JWT) implementation. Prior to 6.2.1, using certain modifiers on RegExp objects in the allowedAud, allowedIss, allowedSub, allowedJti, or allowedNonce options in verify functions can cause certain unintended behaviours. This is because some modifiers are stateful and will cause failures in every second verification attempt regardless of the validity of the token provided. Such modifiers are /g (global matching) and /y (sticky matching). This does NOT allow invalid tokens to be accepted, only for valid tokens to be improperly rejected in some configurations. Instead it causes 50% of valid authentication requests to fail in an alternating pattern. This vulnerability is fixed in 6.2.1. |
| The compiler is meant to unwrap pointers which are the operands of a memory move; a no-op interface conversion prevented the compiler from making the correct determination about non-overlapping moves, potentially leading to memory corruption at runtime. |
| A vulnerability in WatchGuard Fireware OS may allow an attacker to bypass the Fireware OS filesystem integrity check and maintain limited persistence via a maliciously-crafted firmware update package.This issue affects Fireware OS 12.0 up to and including 12.11.7, 12.5.9 up to and including 12.5.16, and 2025.1 up to and including 2026.1.1. |
| LLVM before 18.1.3 generates code in which the LR register can be overwritten without data being saved to the stack, and thus there can sometimes be an exploitable error in the flow of control. This affects the ARM backend and can be demonstrated with Clang. NOTE: the vendor perspective is "we don't have strong objections for a CVE to be created ... It does seem that the likelihood of this miscompile enabling an exploit remains very low, because the miscompile resulting in this JOP gadget is such that the function is most likely to crash on most valid inputs to the function. So, if this function is covered by any testing, the miscompile is most likely to be discovered before the binary is shipped to production." |
| When using http.CrossOriginProtection, the AddInsecureBypassPattern method can unexpectedly bypass more requests than intended. CrossOriginProtection then skips validation, but forwards the original request path, which may be served by a different handler without the intended security protections. |
| An information disclosure vulnerability exists in curl <v8.1.0 when doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously wasused to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the second transfer. The problem exists in the logic for a reused handle when it is (expected to be) changed from a PUT to a POST. |
| When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST. |
| If the PATH environment variable contains paths which are executables (rather than just directories), passing certain strings to LookPath ("", ".", and ".."), can result in the binaries listed in the PATH being unexpectedly returned. |
| An Expected Behavior Violation vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker sending a valid BGP UPDATE packet to cause a BGP session reset, resulting in a Denial of Service (DoS).
Continuous receipt and processing of this packet will create a sustained Denial of Service (DoS) condition.
This issue affects iBGP and eBGP and both IPv4 and IPv6 are affected by this vulnerability.
This issue affects Junos OS:
* All versions before 21.2R3-S9,
* from 21.4 before 21.4R3-S11,
* from 22.2 before 22.2R3-S7,
* from 22.4 before 22.4R3-S7,
* from 23.2 before 23.2R2-S4,
* from 23.4 before 23.4R2-S4,
* from 24.2 before 24.2R2,
* from 24.4 before 24.4R1-S3, 24.4R2
Junos OS Evolved:
* All versions before 22.2R3-S7-EVO,
* from 22.4-EVO before 22.4R3-S7-EVO,
* from 23.2-EVO before 23.2R2-S4-EVO,
* from 23.4-EVO before 23.4R2-S4-EVO,
* from 24.2-EVO before 24.2R2-EVO,
* from 24.4-EVO before 24.4R1-S3-EVO, 24.4R2-EVO. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras
The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C)
report a HID sensor interface that is not actually implemented.
Attempting to access this non-functional sensor via iio_info causes
system hangs as runtime PM tries to wake up an unresponsive sensor.
Add these 2 devices to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace. |
| Erlang/OTP is a set of libraries for the Erlang programming language. In versions prior to OTP-27.3.4 (for OTP-27), OTP-26.2.5.12 (for OTP-26), and OTP-25.3.2.21 (for OTP-25), Erlang/OTP SSH fails to enforce strict KEX handshake hardening measures by allowing optional messages to be exchanged. This allows a Man-in-the-Middle attacker to inject these messages in a connection during the handshake. This issue has been patched in versions OTP-27.3.4 (for OTP-27), OTP-26.2.5.12 (for OTP-26), and OTP-25.3.2.21 (for OTP-25). |
| An Expected Behavior Violation [CWE-440] vulnerability in WatchGuard Fireware OS may allow an attacker to bypass the Fireware OS boot time system integrity check and prevent the Firebox from shutting down in the event of a system integrity check failure. The on-demand system integrity check in the Fireware Web UI will correctly show a failed system integrity check message in the event of a failure.This issue affects Fireware OS: from 12.8.1 through 12.11.4, from 2025.1 through 2025.1.2. |
| In danny-avila/librechat version 0.7.9, there is an insecure API design issue in the 2-Factor Authentication (2FA) flow. The system allows users to disable 2FA without requiring a valid OTP or backup code, bypassing the intended verification process. This vulnerability occurs because the backend does not properly validate the OTP or backup code when the API endpoint '/api/auth/2fa/disable' is directly accessed. This flaw can be exploited by authenticated users to weaken the security of their own accounts, although it does not lead to full account compromise. |
| Inappropriate implementation in Fullscreen in Google Chrome prior to 128.0.6613.84 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) |
