In the Linux kernel, the following vulnerability has been resolved:
ACPI: EC: clean up handlers on probe failure in acpi_ec_setup()
When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware
platforms, it has already started the EC and installed the address
space handler with the struct acpi_ec pointer as handler context.
However, acpi_ec_setup() propagates the error without any cleanup.
The caller acpi_ec_add() then frees the struct acpi_ec for non-boot
instances, leaving a dangling handler context in ACPICA.
Any subsequent AML evaluation that accesses an EC OpRegion field
dispatches into acpi_ec_space_handler() with the freed pointer,
causing a use-after-free:
BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289)
Write of size 8 at addr ffff88800721de38 by task init/1
Call Trace:
<TASK>
mutex_lock (kernel/locking/mutex.c:289)
acpi_ec_space_handler (drivers/acpi/ec.c:1362)
acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293)
acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246)
acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509)
acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700)
acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327)
acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392)
</TASK>
Allocated by task 1:
acpi_ec_alloc (drivers/acpi/ec.c:1424)
acpi_ec_add (drivers/acpi/ec.c:1692)
Freed by task 1:
kfree (mm/slub.c:6876)
acpi_ec_add (drivers/acpi/ec.c:1751)
The bug triggers on reduced-hardware EC platforms (ec->gpe < 0)
when the GPIO IRQ provider defers probing. Once the stale handler
exists, any unprivileged sysfs read that causes AML to touch an
EC OpRegion (battery, thermal, backlight) exercises the dangling
pointer.
Fix this by calling ec_remove_handlers() in the error path of
acpi_ec_setup() before clearing first_ec. ec_remove_handlers()
checks each EC_FLAGS_* bit before acting, so it is safe to call
regardless of how far ec_install_handlers() progressed:
-ENODEV (handler not installed): only calls acpi_ec_stop()
-EPROBE_DEFER (handler installed): removes handler, stops EC
ACPI: EC: clean up handlers on probe failure in acpi_ec_setup()
When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware
platforms, it has already started the EC and installed the address
space handler with the struct acpi_ec pointer as handler context.
However, acpi_ec_setup() propagates the error without any cleanup.
The caller acpi_ec_add() then frees the struct acpi_ec for non-boot
instances, leaving a dangling handler context in ACPICA.
Any subsequent AML evaluation that accesses an EC OpRegion field
dispatches into acpi_ec_space_handler() with the freed pointer,
causing a use-after-free:
BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289)
Write of size 8 at addr ffff88800721de38 by task init/1
Call Trace:
<TASK>
mutex_lock (kernel/locking/mutex.c:289)
acpi_ec_space_handler (drivers/acpi/ec.c:1362)
acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293)
acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246)
acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509)
acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700)
acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327)
acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392)
</TASK>
Allocated by task 1:
acpi_ec_alloc (drivers/acpi/ec.c:1424)
acpi_ec_add (drivers/acpi/ec.c:1692)
Freed by task 1:
kfree (mm/slub.c:6876)
acpi_ec_add (drivers/acpi/ec.c:1751)
The bug triggers on reduced-hardware EC platforms (ec->gpe < 0)
when the GPIO IRQ provider defers probing. Once the stale handler
exists, any unprivileged sysfs read that causes AML to touch an
EC OpRegion (battery, thermal, backlight) exercises the dangling
pointer.
Fix this by calling ec_remove_handlers() in the error path of
acpi_ec_setup() before clearing first_ec. ec_remove_handlers()
checks each EC_FLAGS_* bit before acting, so it is safe to call
regardless of how far ec_install_handlers() progressed:
-ENODEV (handler not installed): only calls acpi_ec_stop()
-EPROBE_DEFER (handler installed): removes handler, stops EC
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | |||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Linux | Linux | unaffected |
|
|||||||||||||||||||||||||||
| Linux | Linux | affected |
|
No data.
No data.
No data.
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Mon, 13 Apr 2026 13:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: clean up handlers on probe failure in acpi_ec_setup() When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware platforms, it has already started the EC and installed the address space handler with the struct acpi_ec pointer as handler context. However, acpi_ec_setup() propagates the error without any cleanup. The caller acpi_ec_add() then frees the struct acpi_ec for non-boot instances, leaving a dangling handler context in ACPICA. Any subsequent AML evaluation that accesses an EC OpRegion field dispatches into acpi_ec_space_handler() with the freed pointer, causing a use-after-free: BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289) Write of size 8 at addr ffff88800721de38 by task init/1 Call Trace: <TASK> mutex_lock (kernel/locking/mutex.c:289) acpi_ec_space_handler (drivers/acpi/ec.c:1362) acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293) acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246) acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509) acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700) acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327) acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392) </TASK> Allocated by task 1: acpi_ec_alloc (drivers/acpi/ec.c:1424) acpi_ec_add (drivers/acpi/ec.c:1692) Freed by task 1: kfree (mm/slub.c:6876) acpi_ec_add (drivers/acpi/ec.c:1751) The bug triggers on reduced-hardware EC platforms (ec->gpe < 0) when the GPIO IRQ provider defers probing. Once the stale handler exists, any unprivileged sysfs read that causes AML to touch an EC OpRegion (battery, thermal, backlight) exercises the dangling pointer. Fix this by calling ec_remove_handlers() in the error path of acpi_ec_setup() before clearing first_ec. ec_remove_handlers() checks each EC_FLAGS_* bit before acting, so it is safe to call regardless of how far ec_install_handlers() progressed: -ENODEV (handler not installed): only calls acpi_ec_stop() -EPROBE_DEFER (handler installed): removes handler, stops EC | |
| Title | ACPI: EC: clean up handlers on probe failure in acpi_ec_setup() | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
|
Projects
Sign in to view the affected projects.
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-04-13T13:40:29.635Z
Reserved: 2026-03-09T15:48:24.088Z
Link: CVE-2026-31426
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-04-13T14:16:12.600
Modified: 2026-04-13T14:16:12.600
Link: CVE-2026-31426
Redhat
No data.
OpenCVE Enrichment
No data.
Weaknesses
No weakness.