Export limit exceeded: 348468 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (348468 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43180 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls netif_stop_queue() and netif_wake_queue(). These are TX queue flow control functions unrelated to RX multicast configuration. The premature netif_wake_queue() can re-enable TX while tx_urb is still in-flight, leading to a double usb_submit_urb() on the same URB: kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); } kaweth_set_rx_mode() { netif_stop_queue(); netif_wake_queue(); // wakes TX queue before URB is done } kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); // URB submitted while active } This triggers the WARN in usb_submit_urb(): "URB submitted while active" This is a similar class of bug fixed in rtl8150 by - commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast"). Also kaweth_set_rx_mode() is already functionally broken, the real set_rx_mode action is performed by kaweth_async_set_rx_mode(), which in turn is not a no-op only at ndo_open() time. | ||||
| CVE-2026-43183 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: cx25821: Fix a resource leak in cx25821_dev_setup() Add release_mem_region() if ioremap() fails to release the memory region obtained by cx25821_get_resources(). | ||||
| CVE-2026-43184 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rnbd-srv: Zero the rsp buffer before using it Before using the data buffer to send back the response message, zero it completely. This prevents any stray bytes to be picked up by the client side when there the message is exchanged between different protocol versions. | ||||
| CVE-2026-43186 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data() On the receive path, __ioam6_fill_trace_data() uses trace->nodelen to decide how much data to write for each node. It trusts this field as-is from the incoming packet, with no consistency check against trace->type (the 24-bit field that tells which data items are present). A crafted packet can set nodelen=0 while setting type bits 0-21, causing the function to write ~100 bytes past the allocated region (into skb_shared_info), which corrupts adjacent heap memory and leads to a kernel panic. Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to derive the expected nodelen from the type field, and use it: - in ioam6_iptunnel.c (send path, existing validation) to replace the open-coded computation; - in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose nodelen is inconsistent with the type field, before any data is written. Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to 0xff1ffc00). | ||||
| CVE-2026-43190 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_tcpmss: check remaining length before reading optlen Quoting reporter: In net/netfilter/xt_tcpmss.c (lines 53-68), the TCP option parser reads op[i+1] directly without validating the remaining option length. If the last byte of the option field is not EOL/NOP (0/1), the code attempts to index op[i+1]. In the case where i + 1 == optlen, this causes an out-of-bounds read, accessing memory past the optlen boundary (either reading beyond the stack buffer _opt or the following payload). | ||||
| CVE-2026-43191 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDS on DCN35 [Why] A backport of the change made for DCN401 that addresses an issue where we turn off the PHY PLL when disabling TMDS output, which causes the OTG to remain stuck. The OTG being stuck can lead to a hang in the DCHVM's ability to ACK invalidations when it thinks the HUBP is still on but it's not receiving global sync. The transition to PLL_ON needs to be atomic as there's no guarantee that the thread isn't pre-empted or is able to complete before the IOMMU watchdog times out. [How] Backport the implementation from dcn401 back to dcn35. There's a functional difference in when the eDP output is disabled in dcn401 code so we don't want to utilize it directly. | ||||
| CVE-2026-43193 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfs4_file refcount leak in nfsd_get_dir_deleg() Claude pointed out that there is a nfs4_file refcount leak in nfsd_get_dir_deleg(). Ensure that the reference to "fp" is released before returning. | ||||
| CVE-2026-43195 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate user queue size constraints Add validation to ensure user queue sizes meet hardware requirements: - Size must be a power of two for efficient ring buffer wrapping - Size must be at least AMDGPU_GPU_PAGE_SIZE to prevent undersized allocations This prevents invalid configurations that could lead to GPU faults or unexpected behavior. | ||||
| CVE-2026-43197 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netconsole: avoid OOB reads, msg is not nul-terminated msg passed to netconsole from the console subsystem is not guaranteed to be nul-terminated. Before recent commit 7eab73b18630 ("netconsole: convert to NBCON console infrastructure") the message would be placed in printk_shared_pbufs, a static global buffer, so KASAN had harder time catching OOB accesses. Now we see: printk: console [netcon_ext0] enabled BUG: KASAN: slab-out-of-bounds in string+0x1f7/0x240 Read of size 1 at addr ffff88813b6d4c00 by task pr/netcon_ext0/594 CPU: 65 UID: 0 PID: 594 Comm: pr/netcon_ext0 Not tainted 6.19.0-11754-g4246fd6547c9 Call Trace: kasan_report+0xe4/0x120 string+0x1f7/0x240 vsnprintf+0x655/0xba0 scnprintf+0xba/0x120 netconsole_write+0x3fe/0xa10 nbcon_emit_next_record+0x46e/0x860 nbcon_kthread_func+0x623/0x750 Allocated by task 1: nbcon_alloc+0x1ea/0x450 register_console+0x26b/0xe10 init_netconsole+0xbb0/0xda0 The buggy address belongs to the object at ffff88813b6d4000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 0 bytes to the right of allocated 3072-byte region [ffff88813b6d4000, ffff88813b6d4c00) | ||||
| CVE-2026-28510 | 1 Elabftw | 1 Elabftw | 2026-05-06 | 5.9 Medium |
| eLabFTW is an open source electronic lab notebook. In elabftw versions through 5.4.1, the login flow did not reliably preserve the multi-factor authentication state across authentication steps. Under certain conditions, an attacker with valid primary credentials could complete authentication with an attacker-controlled TOTP secret and bypass the additional factor. This could result in unauthorized account access. This issue is fixed in version 5.4.2. | ||||
| CVE-2026-43570 | 1 Openclaw | 1 Openclaw | 2026-05-06 | 6.5 Medium |
| OpenClaw versions 2026.3.22 before 2026.4.5 contain a symlink traversal vulnerability in remote marketplace repository path handling that allows attackers to escape the expected repository root. Attackers can exploit this by providing crafted symlink paths to access files outside the intended repository directory. | ||||
| CVE-2026-43534 | 1 Openclaw | 1 Openclaw | 2026-05-06 | 9.1 Critical |
| OpenClaw before 2026.4.10 contains an input validation vulnerability that allows external hook metadata to be enqueued as trusted system events. Attackers can supply malicious hook names to escalate untrusted input into higher-trust agent context. | ||||
| CVE-2026-43528 | 1 Openclaw | 1 Openclaw | 2026-05-06 | 6.5 Medium |
| OpenClaw before 2026.4.14 contains a redaction bypass vulnerability that allows authenticated gateway clients to receive unredacted secrets through sourceConfig and runtimeConfig alias fields. Attackers with config read access can exploit this to obtain provider API keys, gateway authentication material, and channel credentials that should have been redacted. | ||||
| CVE-2026-42436 | 1 Openclaw | 1 Openclaw | 2026-05-06 | 7.7 High |
| OpenClaw before 2026.4.14 contains an improper access control vulnerability in browser snapshot, screenshot, and tab routes that fail to consistently validate the final browser target after navigation. Authenticated callers can bypass SSRF restrictions to expose internal or disallowed page content by exploiting route-driven navigation without proper policy re-validation. | ||||
| CVE-2026-5363 | 1 Tp-link | 2 Archer C7, Archer C7 Firmware | 2026-05-06 | 8.8 High |
| Inadequate Encryption Strength vulnerability in TP-Link Archer C7 v5 and v5.8 (uhttpd modules) allows Password Recovery Exploitation. The web interface encrypts the admin password client-side using RSA-1024 before sending it to the router during login. An adjacent attacker with the ability to intercept network traffic could potentially perform a brute-force or factorization attack against the 1024-bit RSA key to recover the plaintext administrator password, leading to unauthorized access and compromise of the device configuration. This issue affects Archer C7: through Build 20220715. | ||||
| CVE-2023-54347 | 1 Open-emr | 1 Openemr | 2026-05-06 | 7.5 High |
| OpenEMR 7.0.1 contains an authentication brute force vulnerability that allows attackers to bypass rate limiting protections by sending repeated login attempts to the main login endpoint. Attackers can submit POST requests with authUser and clearPass parameters to systematically test username and password combinations without account lockout restrictions. | ||||
| CVE-2026-3601 | 2 Wordpress, Wpeverest | 2 Wordpress, User Registration & Membership – Free & Paid Memberships, Subscriptions, Content Restriction, User Profile, Custom User Registration & Login Builder | 2026-05-06 | 4.3 Medium |
| The User Registration & Membership plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the `embed_form_action()` function in all versions up to, and including, 5.1.4. This makes it possible for authenticated attackers, with Contributor-level access and above, to append shortcode content to arbitrary pages they do not own or have permission to edit. | ||||
| CVE-2026-7812 | 1 54yyyu | 1 Code-mcp | 2026-05-06 | 7.3 High |
| A vulnerability was found in 54yyyu code-mcp up to 4cfc4643541a110c906d93635b391bf7e357f4a8. The impacted element is the function git_operation of the file src/code_mcp/server.py of the component MCP Tool. Performing a manipulation of the argument operation results in command injection. The attack can be initiated remotely. The exploit has been made public and could be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2025-59851 | 2026-05-06 | 3.7 Low | ||
| HCL DFXAnalytics is affected by a Using Components with Known Vulnerabilities flaw where the application utilizes unpatched libraries or sub-components, which could allow an attacker to identify and exploit publicly known security vulnerabilities to gain unauthorized access or compromise the application. | ||||
| CVE-2026-5957 | 2 Roxnor, Wordpress | 2 Emailkit – Email Customizer For Woocommerce & Wp, Wordpress | 2026-05-06 | 6.5 Medium |
| The EmailKit plugin for WordPress is vulnerable to Arbitrary File Read in all versions up to and including 1.6.5. This is due to a flawed path traversal validation in the create_template() method of the CheckForm class, where realpath() is called on the allowed base directory (wp-content/uploads/emailkit/templates/) which may not exist, causing it to return false. In PHP 8.x, strpos($real_path, false) implicitly converts false to an empty string, and strpos() with an empty needle always returns 0, causing the check strpos(...) !== 0 to evaluate to false and bypassing the path validation entirely. This makes it possible for authenticated attackers, with Author-level access and above, to read arbitrary files from the server, including sensitive files such as wp-config.php, by supplying an absolute path to the emailkit-editor-template REST API parameter. | ||||