Export limit exceeded: 347760 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (347760 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31739 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: tegra - Add missing CRYPTO_ALG_ASYNC The tegra crypto driver failed to set the CRYPTO_ALG_ASYNC on its asynchronous algorithms, causing the crypto API to select them for users that request only synchronous algorithms. This causes crashes (at least). Fix this by adding the flag like what the other drivers do. Also remove the unnecessary CRYPTO_ALG_TYPE_* flags, since those just get ignored and overridden by the registration function anyway. | ||||
| CVE-2026-31736 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_ppe: avoid NULL deref when gmac0 is disabled If the gmac0 is disabled, the precheck for a valid ingress device will cause a NULL pointer deref and crash the system. This happens because eth->netdev[0] will be NULL but the code will directly try to access netdev_ops. Instead of just checking for the first net_device, it must be checked if any of the mtk_eth net_devices is matching the netdev_ops of the ingress device. | ||||
| CVE-2026-31734 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix is_bpf_migration_disabled() false negative on non-PREEMPT_RCU Since commit 8e4f0b1ebcf2 ("bpf: use rcu_read_lock_dont_migrate() for trampoline.c"), the BPF prolog (__bpf_prog_enter) calls migrate_disable() only when CONFIG_PREEMPT_RCU is enabled, via rcu_read_lock_dont_migrate(). Without CONFIG_PREEMPT_RCU, the prolog never touches migration_disabled, so migration_disabled == 1 always means the task is truly migration-disabled regardless of whether it is the current task. The old unconditional p == current check was a false negative in this case, potentially allowing a migration-disabled task to be dispatched to a remote CPU and triggering scx_error in task_can_run_on_remote_rq(). Only apply the p == current disambiguation when CONFIG_PREEMPT_RCU is enabled, where the ambiguity with the BPF prolog still exists. | ||||
| CVE-2026-31730 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: possible double-free of cctx->remote_heap fastrpc_init_create_static_process() may free cctx->remote_heap on the err_map path but does not clear the pointer. Later, fastrpc_rpmsg_remove() frees cctx->remote_heap again if it is non-NULL, which can lead to a double-free if the INIT_CREATE_STATIC ioctl hits the error path and the rpmsg device is subsequently removed/unbound. Clear cctx->remote_heap after freeing it in the error path to prevent the later cleanup from freeing it again. This issue was found by an in-house analysis workflow that extracts AST-based information and runs static checks, with LLM assistance for triage, and was confirmed by manual code review. No hardware testing was performed. | ||||
| CVE-2026-31725 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ecm: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | ||||
| CVE-2026-31724 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_eem: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | ||||
| CVE-2026-31723 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | ||||
| CVE-2026-31722 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the borrowed_net flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | ||||
| CVE-2026-7538 | 1 Totolink | 2 A8000ru, A8000ru Firmware | 2026-05-01 | 9.8 Critical |
| A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. This issue affects the function Vulnerability of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument proto leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. | ||||
| CVE-2026-43003 | 2026-05-01 | 8 High | ||
| An issue was discovered in OpenStack ironic-python-agent 1.0.0 through 11.5.0. Ironic Python Agent (IPA) sometimes executes grub-install from within a chroot of the deployed partition image, leading to code execution in the case of a malicious image. | ||||
| CVE-2026-7548 | 1 Totolink | 2 Nr1800x, Nr1800x Firmware | 2026-05-01 | 8.8 High |
| A vulnerability was detected in Totolink NR1800X 9.1.0u.6279_B20210910. This affects the function sub_41A68C of the file /cgi-bin/cstecgi.cgi. Performing a manipulation of the argument setUssd results in command injection. The attack is possible to be carried out remotely. The exploit is now public and may be used. | ||||
| CVE-2026-7578 | 2026-05-01 | 4.7 Medium | ||
| A weakness has been identified in MacCMS Pro up to 2022.1.3. This vulnerability affects the function install of the file /admi.php/admin/addon/add.html of the component Plugin Installation Handler. Executing a manipulation can lead to unrestricted upload. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-31715 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io() The xfstests case "generic/107" and syzbot have both reported a NULL pointer dereference. The concurrent scenario that triggers the panic is as follows: F2FS_WB_CP_DATA write callback umount - f2fs_write_checkpoint - f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA) - blk_mq_end_request - bio_endio - f2fs_write_end_io : dec_page_count(sbi, F2FS_WB_CP_DATA) : wake_up(&sbi->cp_wait) - kill_f2fs_super - kill_block_super - f2fs_put_super : iput(sbi->node_inode) : sbi->node_inode = NULL : f2fs_in_warm_node_list - is_node_folio // sbi->node_inode is NULL and panic The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is decremented to zero. As a result, f2fs_in_warm_node_list() may dereference a NULL node_inode when checking whether a folio belongs to the node inode, leading to a panic. This patch fixes the issue by calling f2fs_in_warm_node_list() before decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the use-after-free condition. | ||||
| CVE-2026-31710 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix dir separator in SMB1 UNIX mounts When calling cifs_mount_get_tcon() with SMB1 UNIX mounts, @cifs_sb->mnt_cifs_flags needs to be read or updated only after calling reset_cifs_unix_caps(), otherwise it might end up with missing CIFS_MOUNT_POSIXACL and CIFS_MOUNT_POSIX_PATHS bits. This fixes the wrong dir separator used in paths caused by the missing CIFS_MOUNT_POSIX_PATHS bit in cifs_sb_info::mnt_cifs_flags. | ||||
| CVE-2026-31705 | 1 Linux | 1 Linux Kernel | 2026-05-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds write in smb2_get_ea() EA alignment smb2_get_ea() applies 4-byte alignment padding via memset() after writing each EA entry. The bounds check on buf_free_len is performed before the value memcpy, but the alignment memset fires unconditionally afterward with no check on remaining space. When the EA value exactly fills the remaining buffer (buf_free_len == 0 after value subtraction), the alignment memset writes 1-3 NUL bytes past the buf_free_len boundary. In compound requests where the response buffer is shared across commands, the first command (e.g., READ) can consume most of the buffer, leaving a tight remainder for the QUERY_INFO EA response. The alignment memset then overwrites past the physical kvmalloc allocation into adjacent kernel heap memory. Add a bounds check before the alignment memset to ensure buf_free_len can accommodate the padding bytes. This is the same bug pattern fixed by commit beef2634f81f ("ksmbd: fix potencial OOB in get_file_all_info() for compound requests") and commit fda9522ed6af ("ksmbd: fix OOB write in QUERY_INFO for compound requests"), both of which added bounds checks before unconditional writes in QUERY_INFO response handlers. | ||||
| CVE-2026-7582 | 1 Openimageio | 1 Openimageio | 2026-05-01 | 5.3 Medium |
| A vulnerability was detected in AcademySoftwareFoundation OpenImageIO up to 3.2.0.1-dev. This vulnerability affects unknown code of the file src/dds.imageio/ddsinput.cpp of the component DDS Image Handler. The manipulation results in out-of-bounds write. The attack needs to be approached locally. The exploit is now public and may be used. The patch is identified as 94ec2deec3e3bf2f2e2ff84d008e27425d626fe2. Applying a patch is advised to resolve this issue. | ||||
| CVE-2025-29635 | 1 Dlink | 2 Dir-823x, Dir-823x Firmware | 2026-05-01 | 7.2 High |
| A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/set_prohibiting via the corresponding function, triggering remote command execution. | ||||
| CVE-2026-3143 | 2026-05-01 | 5.3 Medium | ||
| The Total Upkeep – WordPress Backup Plugin plus Restore & Migrate by BoldGrid plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the 'wp_ajax_cli_cancel' function in all versions up to, and including, 1.17.1. This makes it possible for unauthenticated attackers to cancel a pending rollback, potentially preventing a WordPress installation from automatically reverting a failed update. | ||||
| CVE-2026-43001 | 1 Openstack | 1 Keystone | 2026-05-01 | 7.9 High |
| An issue was discovered in OpenStack Keystone 13 through 29. POST /v3/credentials did not validate that the caller-supplied project_id for an EC2-type credential matched the project of the authenticating application credential. This allowed an attacker holding an unrestricted application credential for project A to create an EC2 credential targeting project B; a subsequent /v3/ec2tokens exchange would then issue a Keystone token scoped to project B while still carrying the original app_cred_id, enabling cross-project lateral movement within the credential owner's role footprint. | ||||
| CVE-2026-7584 | 2026-05-01 | 7.8 High | ||
| The LabOne Q serialization framework uses a class-loading mechanism (import_cls) to dynamically import and instantiate Python classes during deserialization. Prior to the fix, this mechanism accepted arbitrary fully-qualified class names from the serialized data without any validation of the target class or restriction on which modules could be imported. An attacker can craft a serialized experiment file that causes the deserialization engine to import and instantiate arbitrary Python classes with attacker-controlled constructor arguments, resulting in arbitrary code execution in the context of the user running the Python process. Exploitation requires the victim to load a malicious file using LabOne Q's deserialization functions, for example a compromised experiment file shared for collaboration or support purposes. | ||||