Export limit exceeded: 353573 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (353573 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-45839 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: reject negative CO-RE accessor indices in bpf_core_parse_spec() CO-RE accessor strings are colon-separated indices that describe a path from a root BTF type to a target field, e.g. "0:1:2" walks through nested struct members. bpf_core_parse_spec() parses each component with sscanf("%d"), so negative values like -1 are silently accepted. The subsequent bounds checks (access_idx >= btf_vlen(t)) only guard the upper bound and always pass for negative values because C integer promotion converts the __u16 btf_vlen result to int, making the comparison (int)(-1) >= (int)(N) false for any positive N. When -1 reaches btf_member_bit_offset() it gets cast to u32 0xffffffff, producing an out-of-bounds read far past the members array. A crafted BPF program with a negative CO-RE accessor on any struct that exists in vmlinux BTF (e.g. task_struct) crashes the kernel deterministically during BPF_PROG_LOAD on any system with CONFIG_DEBUG_INFO_BTF=y (default on major distributions). The bug is reachable with CAP_BPF: BUG: unable to handle page fault for address: ffffed11818b6626 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 85 Comm: poc Not tainted 7.0.0-rc6 #18 PREEMPT(full) RIP: 0010:bpf_core_parse_spec (tools/lib/bpf/relo_core.c:354) RAX: 00000000ffffffff Call Trace: <TASK> bpf_core_calc_relo_insn (tools/lib/bpf/relo_core.c:1321) bpf_core_apply (kernel/bpf/btf.c:9507) check_core_relo (kernel/bpf/verifier.c:19475) bpf_check (kernel/bpf/verifier.c:26031) bpf_prog_load (kernel/bpf/syscall.c:3089) __sys_bpf (kernel/bpf/syscall.c:6228) </TASK> CO-RE accessor indices are inherently non-negative (struct member index, array element index, or enumerator index), so reject them immediately after parsing. | ||||
| CVE-2026-45975 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: use READ_ONCE() to read struct ublksrv_ctrl_cmd struct ublksrv_ctrl_cmd is part of the io_uring_sqe, which may lie in userspace-mapped memory. It's racy to access its fields with normal loads, as userspace may write to them concurrently. Use READ_ONCE() to copy the ublksrv_ctrl_cmd from the io_uring_sqe to the stack. Use the local copy in place of the one in the io_uring_sqe. | ||||
| CVE-2026-45985 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O When allocating blocks during within-EOF DIO and writeback with dioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split an existing large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT was set when calling ext4_split_convert_extents(), which may potentially result in stale data issues. Assume we have an unwritten extent, and then DIO writes the second half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this range First, ext4_iomap_alloc() call ext4_map_blocks() with EXT4_GET_BLOCKS_PRE_IO, EXT4_GET_BLOCKS_UNWRIT_EXT and EXT4_GET_BLOCKS_CREATE flags set. ext4_map_blocks() find this extent and call ext4_split_convert_extents() with EXT4_GET_BLOCKS_CONVERT and the above flags set. Then, ext4_split_convert_extents() calls ext4_split_extent() with EXT4_EXT_MAY_ZEROOUT, EXT4_EXT_MARK_UNWRIT2 and EXT4_EXT_DATA_VALID2 flags set, and it calls ext4_split_extent_at() to split the second half with EXT4_EXT_DATA_VALID2, EXT4_EXT_MARK_UNWRIT1, EXT4_EXT_MAY_ZEROOUT and EXT4_EXT_MARK_UNWRIT2 flags set. However, ext4_split_extent_at() failed to insert extent since a temporary lack -ENOSPC. It zeroes out the first half but convert the entire on-disk extent to written since the EXT4_EXT_DATA_VALID2 flag set, but left the second half as unwritten in the extent status tree. [0000000000SSSSSS] data S: stale data, 0: zeroed [WWWWWWWWWWWWWWWW] on-disk extent W: written extent [WWWWWWWWWWUUUUUU] extent status tree Finally, if the DIO failed to write data to the disk, the stale data in the second half will be exposed once the cached extent entry is gone. Fix this issue by not passing EXT4_GET_BLOCKS_CONVERT when splitting an unwritten extent before submitting I/O, and make ext4_split_convert_extents() to zero out the entire extent range to zero for this case, and also mark the extent in the extent status tree for consistency. | ||||
| CVE-2026-45992 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: Fix potentially leftover ep1_in_urb at error path The previous fix for handling the error from setup_card() missed that an internal URB cdev->ep1_in_urb might have been already submitted beforehand. In the normal case, this URB gets killed at the disconnection, but in the error path, we didn't do it, hence there can be a potential leak. Fix it in the error path for setup_card(), too. | ||||
| CVE-2026-45998 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential UAF after skb_unshare() failure If skb_unshare() fails to unshare a packet due to allocation failure in rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread()) will be NULL'd out. This will likely cause the call to trace_rxrpc_rx_done() to oops. Fix this by moving the unsharing down to where rxrpc_input_call_event() calls rxrpc_input_call_packet(). There are a number of places prior to that where we ignore DATA packets for a variety of reasons (such as the call already being complete) for which an unshare is then avoided. And with that, rxrpc_input_packet() doesn't need to take a pointer to the pointer to the packet, so change that to just a pointer. | ||||
| CVE-2026-46021 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone governor cleanup issues If thermal_zone_device_register_with_trips() fails after adding a thermal governor to the thermal zone being registered, the governor is not removed from it as appropriate which may lead to a memory leak. In turn, thermal_zone_device_unregister() calls thermal_set_governor() without acquiring the thermal zone lock beforehand which may race with a governor update via sysfs and may lead to a use-after-free in that case. Address these issues by adding two thermal_set_governor() calls, one to thermal_release() to remove the governor from the given thermal zone, and one to the thermal zone registration error path to cover failures preceding the thermal zone device registration. | ||||
| CVE-2026-46024 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Prevent potential null-ptr-deref in ceph_handle_auth_reply() If a message of type CEPH_MSG_AUTH_REPLY contains a zero value for both protocol and result, this is currently not treated as an error. In case of ac->negotiating == true and ac->protocol > 0, this leads to setting ac->protocol = 0 and ac->ops = NULL. Thereafter, the check for ac->protocol != protocol returns false, and init_protocol() is not called. Subsequently, ac->ops->handle_reply() is called, which leads to a null pointer dereference, because ac->ops is still NULL. This patch changes the check for ac->protocol != protocol to !ac->protocol, as this also includes the case when the protocol was set to zero in the message. This causes the message to be treated as containing a bad auth protocol. | ||||
| CVE-2026-46028 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - snapshot IV for async AEAD requests AF_ALG AEAD AIO requests currently use the socket-wide IV buffer during request processing. For async requests, later socket activity can update that shared state before the original request has fully completed, which can lead to inconsistent IV handling. Snapshot the IV into per-request storage when preparing the AEAD request, so in-flight operations no longer depend on mutable socket state. | ||||
| CVE-2026-46029 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/slab: return NULL early from kmalloc_nolock() in NMI on UP On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that unconditionally succeeds even when the lock is already held. As a result, kmalloc_nolock() called from NMI context can re-enter the slab allocator and acquire n->list_lock that the interrupted context is already holding, corrupting slab state. With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with the slub_kunit test module: BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243 [...] Call Trace: <NMI> dump_stack_lvl+0x3f/0x60 do_raw_spin_trylock+0x41/0x50 _raw_spin_trylock+0x24/0x50 get_from_partial_node+0x120/0x4d0 ___slab_alloc+0x8a/0x4c0 kmalloc_nolock_noprof+0x164/0x310 [...] </NMI> Fix this by returning NULL early when invoked from NMI on a UP kernel. | ||||
| CVE-2026-46036 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vfio/cdx: Serialize VFIO_DEVICE_SET_IRQS with a per-device mutex vfio_cdx_set_msi_trigger() reads vdev->config_msi and operates on the vdev->cdx_irqs array based on its value, but provides no serialization against concurrent VFIO_DEVICE_SET_IRQS ioctls. Two callers can race such that one observes config_msi as set while another clears it and frees cdx_irqs via vfio_cdx_msi_disable(), resulting in a use-after-free of the cdx_irqs array. Add a cdx_irqs_lock mutex to struct vfio_cdx_device and acquire it in vfio_cdx_set_msi_trigger(), which is the single chokepoint through which all updates to config_msi, cdx_irqs, and msi_count flow, covering both the ioctl path and the close-device cleanup path. This keeps the test of config_msi atomic with the subsequent enable, disable, or trigger operations. Drop the pre-call !cdx_irqs test from vfio_cdx_irqs_cleanup() as part of this change: the optimization it provided is redundant with the !config_msi early-return inside vfio_cdx_msi_disable(), and leaving the test in place would be an unsynchronized read of state the new lock is meant to protect. | ||||
| CVE-2026-46054 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: selinux: fix overlayfs mmap() and mprotect() access checks The existing SELinux security model for overlayfs is to allow access if the current task is able to access the top level file (the "user" file) and the mounter's credentials are sufficient to access the lower level file (the "backing" file). Unfortunately, the current code does not properly enforce these access controls for both mmap() and mprotect() operations on overlayfs filesystems. This patch makes use of the newly created security_mmap_backing_file() LSM hook to provide the missing backing file enforcement for mmap() operations, and leverages the backing file API and new LSM blob to provide the necessary information to properly enforce the mprotect() access controls. | ||||
| CVE-2026-46061 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: fix deadlock in jbd2_journal_cancel_revoke() Commit f76d4c28a46a ("fs/jbd2: use sleeping version of __find_get_block()") changed jbd2_journal_cancel_revoke() to use __find_get_block_nonatomic() which holds the folio lock instead of i_private_lock. This breaks the lock ordering (folio -> buffer) and causes an ABBA deadlock when the filesystem blocksize < pagesize: T1 T2 ext4_mkdir() ext4_init_new_dir() ext4_append() ext4_getblk() lock_buffer() <- A sync_blockdev() blkdev_writepages() writeback_iter() writeback_get_folio() folio_lock() <- B ext4_journal_get_create_access() jbd2_journal_cancel_revoke() __find_get_block_nonatomic() folio_lock() <- B block_write_full_folio() lock_buffer() <- A This can occasionally cause generic/013 to hang. Fix by only calling __find_get_block_nonatomic() when the passed buffer_head doesn't belong to the bdev, which is the only case that we need to look up its bdev alias. Otherwise, the lookup is redundant since the found buffer_head is equal to the one we passed in. | ||||
| CVE-2026-46064 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix heap over-read in ibmasm_send_i2o_message() The ibmasm_send_i2o_message() function uses get_dot_command_size() to compute the byte count for memcpy_toio(), but this value is derived from user-controlled fields in the dot_command_header (command_size: u8, data_size: u16) and is never validated against the actual allocation size. A root user can write a small buffer with inflated header fields, causing memcpy_toio() to read up to ~65 KB past the end of the allocation into adjacent kernel heap, which is then forwarded to the service processor over MMIO. Silently clamping the copy size is not sufficient: if the header fields claim a larger size than the buffer, the SP receives a dot command whose own header is inconsistent with the I2O message length, which can cause the SP to desynchronize. Reject such commands outright by returning failure. Validate command_size before calling get_mfa_inbound() to avoid leaking an I2O message frame: reading INBOUND_QUEUE_PORT dequeues a hardware frame from the controller's free pool, and returning without a corresponding set_mfa_inbound() call would permanently exhaust it. Additionally, clamp command_size to I2O_COMMAND_SIZE before the memcpy_toio() so the MMIO write stays within the I2O message frame, consistent with the clamping already performed by outgoing_message_size() for the header field. | ||||
| CVE-2026-46065 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_info Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an instance as part of initializing deferred I/O and remove it only after the final mapping has been closed. If the fb_info and the contained deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info to invalidate the mapping. Any access will then result in a SIGBUS signal. Fixes a long-standing problem, where a device hot-unplug happens while user space still has an active mapping of the graphics memory. The hot- unplug frees the instance of struct fb_info. Accessing the memory will operate on undefined state. | ||||
| CVE-2026-46085 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix rxkad crypto unalignment handling Fix handling of a packet with a misaligned crypto length. Also handle non-ENOMEM errors from decryption by aborting. Further, remove the WARN_ON_ONCE() so that it can't be remotely triggered (a trace line can still be emitted). | ||||
| CVE-2026-45956 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl() vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to obtain a struct vidi_context pointer. However, drm_dev->dev is the exynos-drm master device, and the driver_data contained therein is not the vidi component device, but a completely different device. This can lead to various bugs, ranging from null pointer dereferences and garbage value accesses to, in unlucky cases, out-of-bounds errors, use-after-free errors, and more. To resolve this issue, we need to store/delete the vidi device pointer in exynos_drm_private->vidi_dev during bind/unbind, and then read this exynos_drm_private->vidi_dev within ioctl() to obtain the correct struct vidi_context pointer. | ||||
| CVE-2026-45967 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Return proper address for non-zero offsets in insn array The map_direct_value_addr() function of the instruction array map incorrectly adds offset to the resulting address. This is a bug, because later the resolve_pseudo_ldimm64() function adds the offset. Fix it. Corresponding selftests are added in a consequent commit. | ||||
| CVE-2026-45971 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Limit bpf program signature size Practical BPF signatures are significantly smaller than KMALLOC_MAX_CACHE_SIZE Allowing larger sizes opens the door for abuse by passing excessive size values and forcing the kernel into expensive allocation paths (via kmalloc_large or vmalloc). | ||||
| CVE-2026-45973 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix UMR hang in LAG error state unload During firmware reset in LAG mode, a race condition causes the driver to hang indefinitely while waiting for UMR completion during device unload. See [1]. In LAG mode the bond device is only registered on the master, so it never sees sys_error events from the slave. During firmware reset this causes UMR waits to hang forever on unload as the slave is dead but the master hasn't entered error state yet, so UMR posts succeed but completions never arrive. Fix this by adding a sys_error notifier that gets registered before MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device(). This ensures error events reach the bond device throughout teardown. [1] Call Trace: __schedule+0x2bd/0x760 schedule+0x37/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.isra.6+0x2b5/0x4a0 __mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib] ? __xa_erase+0x4a/0xa0 ? _cond_resched+0x15/0x30 ? wait_for_completion+0x31/0x100 ib_dereg_mr_user+0x48/0xc0 [ib_core] ? rdmacg_uncharge_hierarchy+0xa0/0x100 destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs] uverbs_destroy_uobject+0x37/0x150 [ib_uverbs] __uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs] uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs] remove_client_context+0x8b/0xd0 [ib_core] disable_device+0x8c/0x130 [ib_core] __ib_unregister_device+0x10d/0x180 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] __mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib] auxiliary_bus_remove+0x1e/0x30 device_release_driver_internal+0x103/0x1f0 bus_remove_device+0xf7/0x170 device_del+0x181/0x410 mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core] mlx5_disable_lag+0x253/0x260 [mlx5_core] mlx5_lag_disable_change+0x89/0xc0 [mlx5_core] mlx5_eswitch_disable+0x67/0xa0 [mlx5_core] mlx5_unload+0x15/0xd0 [mlx5_core] mlx5_unload_one+0x71/0xc0 [mlx5_core] mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core] process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x22/0x40 | ||||
| CVE-2026-45974 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid leaf access in btrfs_quota_enable() if ref key not found If btrfs_search_slot_for_read() returns 1, it means we did not find any key greater than or equals to the key we asked for, meaning we have reached the end of the tree and therefore the path is not valid. If this happens we need to break out of the loop and stop, instead of continuing and accessing an invalid path. | ||||