Export limit exceeded: 349308 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 349308 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (349308 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43227 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/sh_tmu: Always leave device running after probe The TMU device can be used as both a clocksource and a clockevent provider. The driver tries to be smart and power itself on and off, as well as enabling and disabling its clock when it's not in operation. This behavior is slightly altered if the TMU is used as an early platform device in which case the device is left powered on after probe, but the clock is still enabled and disabled at runtime. This has worked for a long time, but recent improvements in PREEMPT_RT and PROVE_LOCKING have highlighted an issue. As the TMU registers itself as a clockevent provider, clockevents_register_device(), it needs to use raw spinlocks internally as this is the context of which the clockevent framework interacts with the TMU driver. However in the context of holding a raw spinlock the TMU driver can't really manage its power state or clock with calls to pm_runtime_*() and clk_*() as these calls end up in other platform drivers using regular spinlocks to control power and clocks. This mix of spinlock contexts trips a lockdep warning. ============================= [ BUG: Invalid wait context ] 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 Not tainted ----------------------------- swapper/0/0 is trying to lock: ffff000008c9e180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88 other info that might help us debug this: context-{5:5} 1 lock held by swapper/0/0: ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0 #0: ffff8000817ec298 ccree e6601000.crypto: ARM ccree device initialized (tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8 stack backtrace: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 PREEMPT Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) Call trace: show_stack+0x14/0x1c (C) dump_stack_lvl+0x6c/0x90 dump_stack+0x14/0x1c __lock_acquire+0x904/0x1584 lock_acquire+0x220/0x34c _raw_spin_lock_irqsave+0x58/0x80 __pm_runtime_resume+0x38/0x88 sh_tmu_clock_event_set_oneshot+0x84/0xd4 clockevents_switch_state+0xfc/0x13c tick_broadcast_set_event+0x30/0xa4 __tick_broadcast_oneshot_control+0x1e0/0x3a8 tick_broadcast_oneshot_control+0x30/0x40 cpuidle_enter_state+0x40c/0x680 cpuidle_enter+0x30/0x40 do_idle+0x1f4/0x280 cpu_startup_entry+0x34/0x40 kernel_init+0x0/0x130 do_one_initcall+0x0/0x230 __primary_switched+0x88/0x90 For non-PREEMPT_RT builds this is not really an issue, but for PREEMPT_RT builds where normal spinlocks can sleep this might be an issue. Be cautious and always leave the power and clock running after probe. | ||||
| CVE-2026-43082 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: txgbe: leave space for null terminators on property_entry Lists of struct property_entry are supposed to be terminated with an empty property, this driver currently seems to be allocating exactly the amount of entry used. Change the struct definition to leave an extra element for all property_entry. | ||||
| CVE-2026-43089 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm_user: fix info leak in build_mapping() struct xfrm_usersa_id has a one-byte padding hole after the proto field, which ends up never getting set to zero before copying out to userspace. Fix that up by zeroing out the whole structure before setting individual variables. | ||||
| CVE-2026-43096 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mshv: Fix infinite fault loop on permission-denied GPA intercepts Prevent infinite fault loops when guests access memory regions without proper permissions. Currently, mshv_handle_gpa_intercept() attempts to remap pages for all faults on movable memory regions, regardless of whether the access type is permitted. When a guest writes to a read-only region, the remap succeeds but the region remains read-only, causing immediate re-fault and spinning the vCPU indefinitely. Validate intercept access type against region permissions before attempting remaps. Reject writes to non-writable regions and executes to non-executable regions early, returning false to let the VMM handle the intercept appropriately. This also closes a potential DoS vector where malicious guests could intentionally trigger these fault loops to consume host resources. | ||||
| CVE-2026-43103 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: lapbether: handle NETDEV_PRE_TYPE_CHANGE lapbeth_data_transmit() expects the underlying device type to be ARPHRD_ETHER. Returning NOTIFY_BAD from lapbeth_device_event() makes sure bonding driver can not break this expectation. | ||||
| CVE-2026-43137 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: Fix NULL pointer dereference If there's a mismatch between the DAI links in the machine driver and the topology, it is possible that the playback/capture widget is not set, especially in the case of loopback capture for echo reference where we use the dummy DAI link. Return the error when the widget is not set to avoid a null pointer dereference like below when the topology is broken. RIP: 0010:hda_dai_get_ops.isra.0+0x14/0xa0 [snd_sof_intel_hda_common] | ||||
| CVE-2026-43149 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean() The priv->rx_buffer and priv->tx_buffer are alloc'd together as contiguous buffers in uhdlc_init() but freed as two buffers in uhdlc_memclean(). Change the cleanup to only call dma_free_coherent() once on the whole buffer. | ||||
| CVE-2026-43234 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: team: avoid NETDEV_CHANGEMTU event when unregistering slave syzbot is reporting unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3 ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at __netdev_tracker_alloc include/linux/netdevice.h:4400 [inline] netdev_hold include/linux/netdevice.h:4429 [inline] inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286 inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline] netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886 netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907 dev_set_mtu+0x126/0x260 net/core/dev_api.c:248 team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333 team_del_slave drivers/net/team/team_core.c:1936 [inline] team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2281 [inline] call_netdevice_notifiers net/core/dev.c:2295 [inline] __dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592 do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060 rtnl_changelink net/core/rtnetlink.c:3776 [inline] __rtnl_newlink net/core/rtnetlink.c:3935 [inline] rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072 rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894 problem. Ido Schimmel found steps to reproduce ip link add name team1 type team ip link add name dummy1 mtu 1499 master team1 type dummy ip netns add ns1 ip link set dev dummy1 netns ns1 ip -n ns1 link del dev dummy1 and also found that the same issue was fixed in the bond driver in commit f51048c3e07b ("bonding: avoid NETDEV_CHANGEMTU event when unregistering slave"). Let's do similar thing for the team driver, with commit ad7c7b2172c3 ("net: hold netdev instance lock during sysfs operations") and commit 303a8487a657 ("net: s/__dev_set_mtu/__netif_set_mtu/") also applied. | ||||
| CVE-2026-43235 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: Add missing platform data entries for SM8750 Two platform-data fields for SM8750 were missed: - get_vpu_buffer_size = iris_vpu33_buf_size Without this, the driver fails to allocate the required internal buffers, leading to basic decode/encode failures during session bring-up. - max_core_mbps = ((7680 * 4320) / 256) * 60 Without this capability exposed, capability checks are incomplete and v4l2-compliance for encoder fails. | ||||
| CVE-2026-43240 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/kexec: add a sanity check on previous kernel's ima kexec buffer When the second-stage kernel is booted via kexec with a limiting command line such as "mem=<size>", the physical range that contains the carried over IMA measurement list may fall outside the truncated RAM leading to a kernel panic. BUG: unable to handle page fault for address: ffff97793ff47000 RIP: ima_restore_measurement_list+0xdc/0x45a #PF: error_code(0x0000) – not-present page Other architectures already validate the range with page_is_ram(), as done in commit cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer against memory bounds") do a similar check on x86. Without carrying the measurement list across kexec, the attestation would fail. | ||||
| CVE-2026-43244 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: kcm: fix zero-frag skb in frag_list on partial sendmsg error Syzkaller reported a warning in kcm_write_msgs() when processing a message with a zero-fragment skb in the frag_list. When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb, it allocates a new skb (tskb) and links it into the frag_list before copying data. If the copy subsequently fails (e.g. -EFAULT from user memory), tskb remains in the frag_list with zero fragments: head skb (msg being assembled, NOT yet in sk_write_queue) +-----------+ | frags[17] | (MAX_SKB_FRAGS, all filled with data) | frag_list-+--> tskb +-----------+ +----------+ | frags[0] | (empty! copy failed before filling) +----------+ For SOCK_SEQPACKET with partial data already copied, the error path saves this message via partial_message for later completion. For SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a subsequent zero-length write(fd, NULL, 0) completes the message and queues it to sk_write_queue. kcm_write_msgs() then walks the frag_list and hits: WARN_ON(!skb_shinfo(skb)->nr_frags) TCP has a similar pattern where skbs are enqueued before data copy and cleaned up on failure via tcp_remove_empty_skb(). KCM was missing the equivalent cleanup. Fix this by tracking the predecessor skb (frag_prev) when allocating a new frag_list entry. On error, if the tail skb has zero frags, use frag_prev to unlink and free it in O(1) without walking the singly-linked frag_list. frag_prev is safe to dereference because the entire message chain is only held locally (or in kcm->seq_skb) and is not added to sk_write_queue until MSG_EOR, so the send path cannot free it underneath us. Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log if the condition is somehow hit repeatedly. There are currently no KCM selftests in the kernel tree; a simple reproducer is available at [1]. [1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa | ||||
| CVE-2026-43250 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke() The ChipIdea UDC driver can encounter "not page aligned sg buffer" errors when a USB device is reconnected after being disconnected during an active transfer. This occurs because _ep_nuke() returns requests to the gadget layer without properly unmapping DMA buffers or cleaning up scatter-gather bounce buffers. Root cause: When a disconnect happens during a multi-segment DMA transfer, the request's num_mapped_sgs field and sgt.sgl pointer remain set with stale values. The request is returned to the gadget driver with status -ESHUTDOWN but still has active DMA state. If the gadget driver reuses this request on reconnect without reinitializing it, the stale DMA state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero num_mapped_sgs) and attempt to use freed/invalid DMA addresses, leading to alignment errors and potential memory corruption. The normal completion path via _hardware_dequeue() properly calls usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before returning the request. The _ep_nuke() path must do the same cleanup to ensure requests are returned in a clean, reusable state. Fix: Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror the cleanup sequence in _hardware_dequeue(): - Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set - Call sglist_do_debounce() with copy=false if bounce buffer exists This ensures that when requests are returned due to endpoint shutdown, they don't retain stale DMA mappings. The 'false' parameter to sglist_do_debounce() prevents copying data back (appropriate for shutdown path where transfer was aborted). | ||||
| CVE-2026-7899 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 8.8 High |
| Out of bounds read and write in V8 in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-7915 | 1 Google | 2 Android, Chrome | 2026-05-07 | 4.3 Medium |
| Insufficient data validation in DevTools in Google Chrome on Android prior to 148.0.7778.96 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-7936 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 4.3 Medium |
| Object lifecycle issue in V8 in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-7963 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 8.3 High |
| Inappropriate implementation in ServiceWorker in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-7977 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 6.3 Medium |
| Inappropriate implementation in Canvas in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to bypass same origin policy via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-7994 | 2 Google, Microsoft | 2 Chrome, Windows | 2026-05-07 | 7.8 High |
| Inappropriate implementation in Chromoting in Google Chrome on Windows prior to 148.0.7778.96 allowed a local attacker to perform OS-level privilege escalation via a malicious file. (Chromium security severity: Medium) | ||||
| CVE-2026-6222 | 2 Wordpress, Wpmudev | 2 Wordpress, Forminator Forms – Contact Form, Payment Form & Custom Form Builder | 2026-05-07 | 5.3 Medium |
| The Forminator Forms plugin for WordPress is vulnerable to Missing Authorization in versions up to and including 1.51.1. This is due to the `processRequest()` method in `Forminator_Admin_Module_Edit_Page` (admin/abstracts/class-admin-module-edit-page.php) dispatching sensitive module-management actions — including export, delete, clone, delete-entries, publish/draft, and bulk variants — after only a nonce check, without ever verifying that the current user holds the `manage_forminator_modules` capability. The nonce used (`forminator_form_request`) is unconditionally embedded in the global `forminatorData` JavaScript object and localized on every Forminator admin page, including Templates and Reports pages accessible to users who explicitly lack module-management permissions. Because `processRequest()` is invoked during the `admin_menu` action hook — which fires before WordPress enforces page-level capability checks — a user whose Forminator role is restricted to Templates or Reports can craft a valid POST request targeting any published module and successfully trigger the vulnerable actions. This makes it possible for authenticated attackers with subscriber-level access (or any custom low-privilege Forminator role) to export the complete internal configuration of arbitrary forms/polls/quizzes (including notification routing, integration credentials, and conditional logic), delete modules, delete all submissions/votes, clone modules, or bulk-change publish/draft status. | ||||
| CVE-2026-43152 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-pl: handle probe errors Errors in init must be reported back or we'll follow a NULL pointer the first time FF is used. | ||||