Export limit exceeded: 17643 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17643 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40115 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() During mpt3sas_transport_port_remove(), messages were logged with dev_printk() against &mpt3sas_port->port->dev. At this point the SAS transport device may already be partially unregistered or freed, leading to a crash when accessing its struct device. Using ioc_info(), which logs via the PCI device (ioc->pdev->dev), guaranteed to remain valid until driver removal. [83428.295776] Oops: general protection fault, probably for non-canonical address 0x6f702f323a33312d: 0000 [#1] SMP NOPTI [83428.295785] CPU: 145 UID: 0 PID: 113296 Comm: rmmod Kdump: loaded Tainted: G OE 6.16.0-rc1+ #1 PREEMPT(voluntary) [83428.295792] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [83428.295795] Hardware name: Dell Inc. Precision 7875 Tower/, BIOS 89.1.67 02/23/2024 [83428.295799] RIP: 0010:__dev_printk+0x1f/0x70 [83428.295805] Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 d1 48 85 f6 74 52 4c 8b 46 50 4d 85 c0 74 1f 48 8b 46 68 48 85 c0 74 22 <48> 8b 08 0f b6 7f 01 48 c7 c2 db e8 42 ad 83 ef 30 e9 7b f8 ff ff [83428.295813] RSP: 0018:ff85aeafc3137bb0 EFLAGS: 00010206 [83428.295817] RAX: 6f702f323a33312d RBX: ff4290ee81292860 RCX: 5000cca25103be32 [83428.295820] RDX: ff85aeafc3137bb8 RSI: ff4290eeb1966c00 RDI: ffffffffc1560845 [83428.295823] RBP: ff85aeafc3137c18 R08: 74726f702f303a33 R09: ff85aeafc3137bb8 [83428.295826] R10: ff85aeafc3137b18 R11: ff4290f5bd60fe68 R12: ff4290ee81290000 [83428.295830] R13: ff4290ee6e345de0 R14: ff4290ee81290000 R15: ff4290ee6e345e30 [83428.295833] FS: 00007fd9472a6740(0000) GS:ff4290f5ce96b000(0000) knlGS:0000000000000000 [83428.295837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [83428.295840] CR2: 00007f242b4db238 CR3: 00000002372b8006 CR4: 0000000000771ef0 [83428.295844] PKRU: 55555554 [83428.295846] Call Trace: [83428.295848] <TASK> [83428.295850] _dev_printk+0x5c/0x80 [83428.295857] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295863] mpt3sas_transport_port_remove+0x1c7/0x420 [mpt3sas] [83428.295882] _scsih_remove_device+0x21b/0x280 [mpt3sas] [83428.295894] ? _scsih_expander_node_remove+0x108/0x140 [mpt3sas] [83428.295906] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295910] mpt3sas_device_remove_by_sas_address.part.0+0x8f/0x110 [mpt3sas] [83428.295921] _scsih_expander_node_remove+0x129/0x140 [mpt3sas] [83428.295933] _scsih_expander_node_remove+0x6a/0x140 [mpt3sas] [83428.295944] scsih_remove+0x3f0/0x4a0 [mpt3sas] [83428.295957] pci_device_remove+0x3b/0xb0 [83428.295962] device_release_driver_internal+0x193/0x200 [83428.295968] driver_detach+0x44/0x90 [83428.295971] bus_remove_driver+0x69/0xf0 [83428.295975] pci_unregister_driver+0x2a/0xb0 [83428.295979] _mpt3sas_exit+0x1f/0x300 [mpt3sas] [83428.295991] __do_sys_delete_module.constprop.0+0x174/0x310 [83428.295997] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296000] ? __x64_sys_getdents64+0x9a/0x110 [83428.296005] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296009] ? syscall_trace_enter+0xf6/0x1b0 [83428.296014] do_syscall_64+0x7b/0x2c0 [83428.296019] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296023] entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2025-68778 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't log conflicting inode if it's a dir moved in the current transaction We can't log a conflicting inode if it's a directory and it was moved from one parent directory to another parent directory in the current transaction, as this can result an attempt to have a directory with two hard links during log replay, one for the old parent directory and another for the new parent directory. The following scenario triggers that issue: 1) We have directories "dir1" and "dir2" created in a past transaction. Directory "dir1" has inode A as its parent directory; 2) We move "dir1" to some other directory; 3) We create a file with the name "dir1" in directory inode A; 4) We fsync the new file. This results in logging the inode of the new file and the inode for the directory "dir1" that was previously moved in the current transaction. So the log tree has the INODE_REF item for the new location of "dir1"; 5) We move the new file to some other directory. This results in updating the log tree to included the new INODE_REF for the new location of the file and removes the INODE_REF for the old location. This happens during the rename when we call btrfs_log_new_name(); 6) We fsync the file, and that persists the log tree changes done in the previous step (btrfs_log_new_name() only updates the log tree in memory); 7) We have a power failure; 8) Next time the fs is mounted, log replay happens and when processing the inode for directory "dir1" we find a new INODE_REF and add that link, but we don't remove the old link of the inode since we have not logged the old parent directory of the directory inode "dir1". As a result after log replay finishes when we trigger writeback of the subvolume tree's extent buffers, the tree check will detect that we have a directory a hard link count of 2 and we get a mount failure. The errors and stack traces reported in dmesg/syslog are like this: [ 3845.729764] BTRFS info (device dm-0): start tree-log replay [ 3845.730304] page: refcount:3 mapcount:0 mapping:000000005c8a3027 index:0x1d00 pfn:0x11510c [ 3845.731236] memcg:ffff9264c02f4e00 [ 3845.731751] aops:btree_aops [btrfs] ino:1 [ 3845.732300] flags: 0x17fffc00000400a(uptodate|private|writeback|node=0|zone=2|lastcpupid=0x1ffff) [ 3845.733346] raw: 017fffc00000400a 0000000000000000 dead000000000122 ffff9264d978aea8 [ 3845.734265] raw: 0000000000001d00 ffff92650e6d4738 00000003ffffffff ffff9264c02f4e00 [ 3845.735305] page dumped because: eb page dump [ 3845.735981] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=6 ino=257, invalid nlink: has 2 expect no more than 1 for dir [ 3845.737786] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14881 owner 5 [ 3845.737789] BTRFS info (device dm-0): refs 4 lock_owner 0 current 30701 [ 3845.737792] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 [ 3845.737794] inode generation 3 transid 9 size 16 nbytes 16384 [ 3845.737795] block group 0 mode 40755 links 1 uid 0 gid 0 [ 3845.737797] rdev 0 sequence 2 flags 0x0 [ 3845.737798] atime 1764259517.0 [ 3845.737800] ctime 1764259517.572889464 [ 3845.737801] mtime 1764259517.572889464 [ 3845.737802] otime 1764259517.0 [ 3845.737803] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12 [ 3845.737805] index 0 name_len 2 [ 3845.737807] item 2 key (256 DIR_ITEM 2363071922) itemoff 16077 itemsize 34 [ 3845.737808] location key (257 1 0) type 2 [ 3845.737810] transid 9 data_len 0 name_len 4 [ 3845.737811] item 3 key (256 DIR_ITEM 2676584006) itemoff 16043 itemsize 34 [ 3845.737813] location key (258 1 0) type 2 [ 3845.737814] transid 9 data_len 0 name_len 4 [ 3845.737815] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34 [ 3845.737816] location key (257 1 0) type 2 [ ---truncated--- | ||||
| CVE-2025-68191 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: udp_tunnel: use netdev_warn() instead of netdev_WARN() netdev_WARN() uses WARN/WARN_ON to print a backtrace along with file and line information. In this case, udp_tunnel_nic_register() returning an error is just a failed operation, not a kernel bug. udp_tunnel_nic_register() can fail due to a memory allocation failure (kzalloc() or udp_tunnel_nic_alloc()). This is a normal runtime error and not a kernel bug. Replace netdev_WARN() with netdev_warn() accordingly. | ||||
| CVE-2025-68318 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL The AXI crossbar of TH1520 has no proper timeout handling, which means gating AXI clocks can easily lead to bus timeout and thus system hang. Set all AXI clock gates to CLK_IS_CRITICAL. All these clock gates are ungated by default on system reset. In addition, convert all current CLK_IGNORE_UNUSED usage to CLK_IS_CRITICAL to prevent unwanted clock gating. | ||||
| CVE-2025-68325 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop In cake_drop(), qdisc_tree_reduce_backlog() is used to update the qlen and backlog of the qdisc hierarchy. Its caller, cake_enqueue(), assumes that the parent qdisc will enqueue the current packet. However, this assumption breaks when cake_enqueue() returns NET_XMIT_CN: the parent qdisc stops enqueuing current packet, leaving the tree qlen/backlog accounting inconsistent. This mismatch can lead to a NULL dereference (e.g., when the parent Qdisc is qfq_qdisc). This patch computes the qlen/backlog delta in a more robust way by observing the difference before and after the series of cake_drop() calls, and then compensates the qdisc tree accounting if cake_enqueue() returns NET_XMIT_CN. To ensure correct compensation when ACK thinning is enabled, a new variable is introduced to keep qlen unchanged. | ||||
| CVE-2025-40199 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: page_pool: Fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches Helge reported that the introduction of PP_MAGIC_MASK let to crashes on boot on his 32-bit parisc machine. The cause of this is the mask is set too wide, so the page_pool_page_is_pp() incurs false positives which crashes the machine. Just disabling the check in page_pool_is_pp() will lead to the page_pool code itself malfunctioning; so instead of doing this, this patch changes the define for PP_DMA_INDEX_BITS to avoid mistaking arbitrary kernel pointers for page_pool-tagged pages. The fix relies on the kernel pointers that alias with the pp_magic field always being above PAGE_OFFSET. With this assumption, we can use the lowest bit of the value of PAGE_OFFSET as the upper bound of the PP_DMA_INDEX_MASK, which should avoid the false positives. Because we cannot rely on PAGE_OFFSET always being a compile-time constant, nor on it always being >0, we fall back to disabling the dma_index storage when there are not enough bits available. This leaves us in the situation we were in before the patch in the Fixes tag, but only on a subset of architecture configurations. This seems to be the best we can do until the transition to page types in complete for page_pool pages. v2: - Make sure there's at least 8 bits available and that the PAGE_OFFSET bit calculation doesn't wrap | ||||
| CVE-2025-68756 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lock blk_mq_{add,del}_queue_tag_set() functions add and remove queues from tagset, the functions make sure that tagset and queues are marked as shared when two or more queues are attached to the same tagset. Initially a tagset starts as unshared and when the number of added queues reaches two, blk_mq_add_queue_tag_set() marks it as shared along with all the queues attached to it. When the number of attached queues drops to 1 blk_mq_del_queue_tag_set() need to mark both the tagset and the remaining queues as unshared. Both functions need to freeze current queues in tagset before setting on unsetting BLK_MQ_F_TAG_QUEUE_SHARED flag. While doing so, both functions hold set->tag_list_lock mutex, which makes sense as we do not want queues to be added or deleted in the process. This used to work fine until commit 98d81f0df70c ("nvme: use blk_mq_[un]quiesce_tagset") made the nvme driver quiesce tagset instead of quiscing individual queues. blk_mq_quiesce_tagset() does the job and quiesce the queues in set->tag_list while holding set->tag_list_lock also. This results in deadlock between two threads with these stacktraces: __schedule+0x47c/0xbb0 ? timerqueue_add+0x66/0xb0 schedule+0x1c/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.constprop.0+0x271/0x600 blk_mq_quiesce_tagset+0x25/0xc0 nvme_dev_disable+0x9c/0x250 nvme_timeout+0x1fc/0x520 blk_mq_handle_expired+0x5c/0x90 bt_iter+0x7e/0x90 blk_mq_queue_tag_busy_iter+0x27e/0x550 ? __blk_mq_complete_request_remote+0x10/0x10 ? __blk_mq_complete_request_remote+0x10/0x10 ? __call_rcu_common.constprop.0+0x1c0/0x210 blk_mq_timeout_work+0x12d/0x170 process_one_work+0x12e/0x2d0 worker_thread+0x288/0x3a0 ? rescuer_thread+0x480/0x480 kthread+0xb8/0xe0 ? kthread_park+0x80/0x80 ret_from_fork+0x2d/0x50 ? kthread_park+0x80/0x80 ret_from_fork_asm+0x11/0x20 __schedule+0x47c/0xbb0 ? xas_find+0x161/0x1a0 schedule+0x1c/0xa0 blk_mq_freeze_queue_wait+0x3d/0x70 ? destroy_sched_domains_rcu+0x30/0x30 blk_mq_update_tag_set_shared+0x44/0x80 blk_mq_exit_queue+0x141/0x150 del_gendisk+0x25a/0x2d0 nvme_ns_remove+0xc9/0x170 nvme_remove_namespaces+0xc7/0x100 nvme_remove+0x62/0x150 pci_device_remove+0x23/0x60 device_release_driver_internal+0x159/0x200 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x112/0x1e0 vfs_write+0x2b1/0x3d0 ksys_write+0x4e/0xb0 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x4b/0x53 The top stacktrace is showing nvme_timeout() called to handle nvme command timeout. timeout handler is trying to disable the controller and as a first step, it needs to blk_mq_quiesce_tagset() to tell blk-mq not to call queue callback handlers. The thread is stuck waiting for set->tag_list_lock as it tries to walk the queues in set->tag_list. The lock is held by the second thread in the bottom stack which is waiting for one of queues to be frozen. The queue usage counter will drop to zero after nvme_timeout() finishes, and this will not happen because the thread will wait for this mutex forever. Given that [un]quiescing queue is an operation that does not need to sleep, update blk_mq_[un]quiesce_tagset() to use RCU instead of taking set->tag_list_lock, update blk_mq_{add,del}_queue_tag_set() to use RCU safe list operations. Also, delete INIT_LIST_HEAD(&q->tag_set_list) in blk_mq_del_queue_tag_set() because we can not re-initialize it while the list is being traversed under RCU. The deleted queue will not be added/deleted to/from a tagset and it will be freed in blk_free_queue() after the end of RCU grace period. | ||||
| CVE-2025-68371 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Fix device resources accessed after device removal Correct possible race conditions during device removal. Previously, a scheduled work item to reset a LUN could still execute after the device was removed, leading to use-after-free and other resource access issues. This race condition occurs because the abort handler may schedule a LUN reset concurrently with device removal via sdev_destroy(), leading to use-after-free and improper access to freed resources. - Check in the device reset handler if the device is still present in the controller's SCSI device list before running; if not, the reset is skipped. - Cancel any pending TMF work that has not started in sdev_destroy(). - Ensure device freeing in sdev_destroy() is done while holding the LUN reset mutex to avoid races with ongoing resets. | ||||
| CVE-2025-40122 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error When running perf_fuzzer on PTL, sometimes the below "unchecked MSR access error" is seen when accessing IA32_PMC_x_CFG_B MSRs. [ 55.611268] unchecked MSR access error: WRMSR to 0x1986 (tried to write 0x0000000200000001) at rIP: 0xffffffffac564b28 (native_write_msr+0x8/0x30) [ 55.611280] Call Trace: [ 55.611282] <TASK> [ 55.611284] ? intel_pmu_config_acr+0x87/0x160 [ 55.611289] intel_pmu_enable_acr+0x6d/0x80 [ 55.611291] intel_pmu_enable_event+0xce/0x460 [ 55.611293] x86_pmu_start+0x78/0xb0 [ 55.611297] x86_pmu_enable+0x218/0x3a0 [ 55.611300] ? x86_pmu_enable+0x121/0x3a0 [ 55.611302] perf_pmu_enable+0x40/0x50 [ 55.611307] ctx_resched+0x19d/0x220 [ 55.611309] __perf_install_in_context+0x284/0x2f0 [ 55.611311] ? __pfx_remote_function+0x10/0x10 [ 55.611314] remote_function+0x52/0x70 [ 55.611317] ? __pfx_remote_function+0x10/0x10 [ 55.611319] generic_exec_single+0x84/0x150 [ 55.611323] smp_call_function_single+0xc5/0x1a0 [ 55.611326] ? __pfx_remote_function+0x10/0x10 [ 55.611329] perf_install_in_context+0xd1/0x1e0 [ 55.611331] ? __pfx___perf_install_in_context+0x10/0x10 [ 55.611333] __do_sys_perf_event_open+0xa76/0x1040 [ 55.611336] __x64_sys_perf_event_open+0x26/0x30 [ 55.611337] x64_sys_call+0x1d8e/0x20c0 [ 55.611339] do_syscall_64+0x4f/0x120 [ 55.611343] entry_SYSCALL_64_after_hwframe+0x76/0x7e On PTL, GP counter 0 and 1 doesn't support auto counter reload feature, thus it would trigger a #GP when trying to write 1 on bit 0 of CFG_B MSR which requires to enable auto counter reload on GP counter 0. The root cause of causing this issue is the check for auto counter reload (ACR) counter mask from user space is incorrect in intel_pmu_acr_late_setup() helper. It leads to an invalid ACR counter mask from user space could be set into hw.config1 and then written into CFG_B MSRs and trigger the MSR access warning. e.g., User may create a perf event with ACR counter mask (config2=0xcb), and there is only 1 event created, so "cpuc->n_events" is 1. The correct check condition should be "i + idx >= cpuc->n_events" instead of "i + idx > cpuc->n_events" (it looks a typo). Otherwise, the counter mask would traverse twice and an invalid "cpuc->assign[1]" bit (bit 0) is set into hw.config1 and cause MSR accessing error. Besides, also check if the ACR counter mask corresponding events are ACR events. If not, filter out these counter mask. If a event is not a ACR event, it could be scheduled to an HW counter which doesn't support ACR. It's invalid to add their counter index in ACR counter mask. Furthermore, remove the WARN_ON_ONCE() since it's easily triggered as user could set any invalid ACR counter mask and the warning message could mislead users. | ||||
| CVE-2025-40022 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Fix incorrect boolean values in af_alg_ctx Commit 1b34cbbf4f01 ("crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg") changed some fields from bool to 1-bit bitfields of type u32. However, some assignments to these fields, specifically 'more' and 'merge', assign values greater than 1. These relied on C's implicit conversion to bool, such that zero becomes false and nonzero becomes true. With a 1-bit bitfields of type u32 instead, mod 2 of the value is taken instead, resulting in 0 being assigned in some cases when 1 was intended. Fix this by restoring the bool type. | ||||
| CVE-2025-40111 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix Use-after-free in validation Nodes stored in the validation duplicates hashtable come from an arena allocator that is cleared at the end of vmw_execbuf_process. All nodes are expected to be cleared in vmw_validation_drop_ht but this node escaped because its resource was destroyed prematurely. | ||||
| CVE-2025-40126 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC The referenced commit introduced exception handlers on user-space memory references in copy_from_user and copy_to_user. These handlers return from the respective function and calculate the remaining bytes left to copy using the current register contents. This commit fixes a couple of bad calculations. This will fix the return value of copy_from_user and copy_to_user in the faulting case. The behaviour of memcpy stays unchanged. | ||||
| CVE-2025-68235 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nouveau/firmware: Add missing kfree() of nvkm_falcon_fw::boot nvkm_falcon_fw::boot is allocated, but no one frees it. This causes a kmemleak warning. Make sure this data is deallocated. | ||||
| CVE-2025-40130 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix data race in CPU latency PM QoS request handling The cpu_latency_qos_add/remove/update_request interfaces lack internal synchronization by design, requiring the caller to ensure thread safety. The current implementation relies on the 'pm_qos_enabled' flag, which is insufficient to prevent concurrent access and cannot serve as a proper synchronization mechanism. This has led to data races and list corruption issues. A typical race condition call trace is: [Thread A] ufshcd_pm_qos_exit() --> cpu_latency_qos_remove_request() --> cpu_latency_qos_apply(); --> pm_qos_update_target() --> plist_del <--(1) delete plist node --> memset(req, 0, sizeof(*req)); --> hba->pm_qos_enabled = false; [Thread B] ufshcd_devfreq_target --> ufshcd_devfreq_scale --> ufshcd_scale_clks --> ufshcd_pm_qos_update <--(2) pm_qos_enabled is true --> cpu_latency_qos_update_request --> pm_qos_update_target --> plist_del <--(3) plist node use-after-free Introduces a dedicated mutex to serialize PM QoS operations, preventing data races and ensuring safe access to PM QoS resources, including sysfs interface reads. | ||||
| CVE-2025-40169 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative offsets for ALU ops When verifying BPF programs, the check_alu_op() function validates instructions with ALU operations. The 'offset' field in these instructions is a signed 16-bit integer. The existing check 'insn->off > 1' was intended to ensure the offset is either 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' is signed, this check incorrectly accepts all negative values (e.g., -1). This commit tightens the validation by changing the condition to '(insn->off != 0 && insn->off != 1)'. This ensures that any value other than the explicitly permitted 0 and 1 is rejected, hardening the verifier against malformed BPF programs. | ||||
| CVE-2025-68803 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: NFSv4 file creation neglects setting ACL An NFSv4 client that sets an ACL with a named principal during file creation retrieves the ACL afterwards, and finds that it is only a default ACL (based on the mode bits) and not the ACL that was requested during file creation. This violates RFC 8881 section 6.4.1.3: "the ACL attribute is set as given". The issue occurs in nfsd_create_setattr(), which calls nfsd_attrs_valid() to determine whether to call nfsd_setattr(). However, nfsd_attrs_valid() checks only for iattr changes and security labels, but not POSIX ACLs. When only an ACL is present, the function returns false, nfsd_setattr() is skipped, and the POSIX ACL is never applied to the inode. Subsequently, when the client retrieves the ACL, the server finds no POSIX ACL on the inode and returns one generated from the file's mode bits rather than returning the originally-specified ACL. | ||||
| CVE-2025-40163 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/deadline: Stop dl_server before CPU goes offline IBM CI tool reported kernel warning[1] when running a CPU removal operation through drmgr[2]. i.e "drmgr -c cpu -r -q 1" WARNING: CPU: 0 PID: 0 at kernel/sched/cpudeadline.c:219 cpudl_set+0x58/0x170 NIP [c0000000002b6ed8] cpudl_set+0x58/0x170 LR [c0000000002b7cb8] dl_server_timer+0x168/0x2a0 Call Trace: [c000000002c2f8c0] init_stack+0x78c0/0x8000 (unreliable) [c0000000002b7cb8] dl_server_timer+0x168/0x2a0 [c00000000034df84] __hrtimer_run_queues+0x1a4/0x390 [c00000000034f624] hrtimer_interrupt+0x124/0x300 [c00000000002a230] timer_interrupt+0x140/0x320 Git bisects to: commit 4ae8d9aa9f9d ("sched/deadline: Fix dl_server getting stuck") This happens since: - dl_server hrtimer gets enqueued close to cpu offline, when kthread_park enqueues a fair task. - CPU goes offline and drmgr removes it from cpu_present_mask. - hrtimer fires and warning is hit. Fix it by stopping the dl_server before CPU is marked dead. [1]: https://lore.kernel.org/all/8218e149-7718-4432-9312-f97297c352b9@linux.ibm.com/ [2]: https://github.com/ibm-power-utilities/powerpc-utils/tree/next/src/drmgr [sshegde: wrote the changelog and tested it] | ||||
| CVE-2025-68236 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3) According to UFS specifications, the power-off sequence for a UFS device includes: - Sending an SSU command with Power_Condition=3 and await a response. - Asserting RST_N low. - Turning off REF_CLK. - Turning off VCC. - Turning off VCCQ/VCCQ2. As part of ufs shutdown, after the SSU command completion, asserting hardware reset (HWRST) triggers the device firmware to wake up and execute its reset routine. This routine initializes hardware blocks and takes a few milliseconds to complete. During this time, the ICCQ draws a large current. This large ICCQ current may cause issues for the regulator which is supplying power to UFS, because the turn off request from UFS driver to the regulator framework will be immediately followed by low power mode(LPM) request by regulator framework. This is done by framework because UFS which is the only client is requesting for disable. So if the rail is still in the process of shutting down while ICCQ exceeds LPM current thresholds, and LPM mode is activated in hardware during this state, it may trigger an overcurrent protection (OCP) fault in the regulator. To prevent this, a 10ms delay is added after asserting HWRST. This allows the reset operation to complete while power rails remain active and in high-power mode. Currently there is no way for Host to query whether the reset is completed or not and hence this the delay is based on experiments with Qualcomm UFS controllers across multiple UFS vendors. | ||||
| CVE-2025-68791 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fuse: missing copy_finish in fuse-over-io-uring argument copies Fix a possible reference count leak of payload pages during fuse argument copies. [Joanne: simplified error cleanup] | ||||
| CVE-2025-68815 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: Remove drr class from the active list if it changes to strict Whenever a user issues an ets qdisc change command, transforming a drr class into a strict one, the ets code isn't checking whether that class was in the active list and removing it. This means that, if a user changes a strict class (which was in the active list) back to a drr one, that class will be added twice to the active list [1]. Doing so with the following commands: tc qdisc add dev lo root handle 1: ets bands 2 strict 1 tc qdisc add dev lo parent 1:2 handle 20: \ tbf rate 8bit burst 100b latency 1s tc filter add dev lo parent 1: basic classid 1:2 ping -c1 -W0.01 -s 56 127.0.0.1 tc qdisc change dev lo root handle 1: ets bands 2 strict 2 tc qdisc change dev lo root handle 1: ets bands 2 strict 1 ping -c1 -W0.01 -s 56 127.0.0.1 Will trigger the following splat with list debug turned on: [ 59.279014][ T365] ------------[ cut here ]------------ [ 59.279452][ T365] list_add double add: new=ffff88801d60e350, prev=ffff88801d60e350, next=ffff88801d60e2c0. [ 59.280153][ T365] WARNING: CPU: 3 PID: 365 at lib/list_debug.c:35 __list_add_valid_or_report+0x17f/0x220 [ 59.280860][ T365] Modules linked in: [ 59.281165][ T365] CPU: 3 UID: 0 PID: 365 Comm: tc Not tainted 6.18.0-rc7-00105-g7e9f13163c13-dirty #239 PREEMPT(voluntary) [ 59.281977][ T365] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 59.282391][ T365] RIP: 0010:__list_add_valid_or_report+0x17f/0x220 [ 59.282842][ T365] Code: 89 c6 e8 d4 b7 0d ff 90 0f 0b 90 90 31 c0 e9 31 ff ff ff 90 48 c7 c7 e0 a0 22 9f 48 89 f2 48 89 c1 4c 89 c6 e8 b2 b7 0d ff 90 <0f> 0b 90 90 31 c0 e9 0f ff ff ff 48 89 f7 48 89 44 24 10 4c 89 44 ... [ 59.288812][ T365] Call Trace: [ 59.289056][ T365] <TASK> [ 59.289224][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.289546][ T365] ets_qdisc_change+0xd2b/0x1e80 [ 59.289891][ T365] ? __lock_acquire+0x7e7/0x1be0 [ 59.290223][ T365] ? __pfx_ets_qdisc_change+0x10/0x10 [ 59.290546][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.290898][ T365] ? __mutex_trylock_common+0xda/0x240 [ 59.291228][ T365] ? __pfx___mutex_trylock_common+0x10/0x10 [ 59.291655][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.291993][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.292313][ T365] ? trace_contention_end+0xc8/0x110 [ 59.292656][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.293022][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.293351][ T365] tc_modify_qdisc+0x63a/0x1cf0 Fix this by always checking and removing an ets class from the active list when changing it to strict. [1] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/tree/net/sched/sch_ets.c?id=ce052b9402e461a9aded599f5b47e76bc727f7de#n663 | ||||