Export limit exceeded: 346610 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (346610 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31658 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit() When dma_map_single() fails in tse_start_xmit(), the function returns NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the stack the packet was consumed, the skb is never freed, leaking memory on every DMA mapping failure. Add dev_kfree_skb_any() before returning to properly free the skb. | ||||
| CVE-2026-31657 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: hold claim backbone gateways by reference batadv_bla_add_claim() can replace claim->backbone_gw and drop the old gateway's last reference while readers still follow the pointer. The netlink claim dump path dereferences claim->backbone_gw->orig and takes claim->backbone_gw->crc_lock without pinning the underlying backbone gateway. batadv_bla_check_claim() still has the same naked pointer access pattern. Reuse batadv_bla_claim_get_backbone_gw() in both readers so they operate on a stable gateway reference until the read-side work is complete. This keeps the dump and claim-check paths aligned with the lifetime rules introduced for the other BLA claim readers. | ||||
| CVE-2026-31656 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: fix refcount underflow in intel_engine_park_heartbeat A use-after-free / refcount underflow is possible when the heartbeat worker and intel_engine_park_heartbeat() race to release the same engine->heartbeat.systole request. The heartbeat worker reads engine->heartbeat.systole and calls i915_request_put() on it when the request is complete, but clears the pointer in a separate, non-atomic step. Concurrently, a request retirement on another CPU can drop the engine wakeref to zero, triggering __engine_park() -> intel_engine_park_heartbeat(). If the heartbeat timer is pending at that point, cancel_delayed_work() returns true and intel_engine_park_heartbeat() reads the stale non-NULL systole pointer and calls i915_request_put() on it again, causing a refcount underflow: ``` <4> [487.221889] Workqueue: i915-unordered engine_retire [i915] <4> [487.222640] RIP: 0010:refcount_warn_saturate+0x68/0xb0 ... <4> [487.222707] Call Trace: <4> [487.222711] <TASK> <4> [487.222716] intel_engine_park_heartbeat.part.0+0x6f/0x80 [i915] <4> [487.223115] intel_engine_park_heartbeat+0x25/0x40 [i915] <4> [487.223566] __engine_park+0xb9/0x650 [i915] <4> [487.223973] ____intel_wakeref_put_last+0x2e/0xb0 [i915] <4> [487.224408] __intel_wakeref_put_last+0x72/0x90 [i915] <4> [487.224797] intel_context_exit_engine+0x7c/0x80 [i915] <4> [487.225238] intel_context_exit+0xf1/0x1b0 [i915] <4> [487.225695] i915_request_retire.part.0+0x1b9/0x530 [i915] <4> [487.226178] i915_request_retire+0x1c/0x40 [i915] <4> [487.226625] engine_retire+0x122/0x180 [i915] <4> [487.227037] process_one_work+0x239/0x760 <4> [487.227060] worker_thread+0x200/0x3f0 <4> [487.227068] ? __pfx_worker_thread+0x10/0x10 <4> [487.227075] kthread+0x10d/0x150 <4> [487.227083] ? __pfx_kthread+0x10/0x10 <4> [487.227092] ret_from_fork+0x3d4/0x480 <4> [487.227099] ? __pfx_kthread+0x10/0x10 <4> [487.227107] ret_from_fork_asm+0x1a/0x30 <4> [487.227141] </TASK> ``` Fix this by replacing the non-atomic pointer read + separate clear with xchg() in both racing paths. xchg() is a single indivisible hardware instruction that atomically reads the old pointer and writes NULL. This guarantees only one of the two concurrent callers obtains the non-NULL pointer and performs the put, the other gets NULL and skips it. (cherry picked from commit 13238dc0ee4f9ab8dafa2cca7295736191ae2f42) | ||||
| CVE-2026-31655 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx8mp-blk-ctrl: Keep the NOC_HDCP clock enabled Keep the NOC_HDCP clock always enabled to fix the potential hang caused by the NoC ADB400 port power down handshake. | ||||
| CVE-2026-31654 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/vma: fix memory leak in __mmap_region() commit 605f6586ecf7 ("mm/vma: do not leak memory when .mmap_prepare swaps the file") handled the success path by skipping get_file() via file_doesnt_need_get, but missed the error path. When /dev/zero is mmap'd with MAP_SHARED, mmap_zero_prepare() calls shmem_zero_setup_desc() which allocates a new shmem file to back the mapping. If __mmap_new_vma() subsequently fails, this replacement file is never fput()'d - the original is released by ksys_mmap_pgoff(), but nobody releases the new one. Add fput() for the swapped file in the error path. Reproducible with fault injection. FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 CPU: 2 UID: 0 PID: 366 Comm: syz.7.14 Not tainted 7.0.0-rc6 #2 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x164/0x1f0 should_fail_ex+0x525/0x650 should_failslab+0xdf/0x140 kmem_cache_alloc_noprof+0x78/0x630 vm_area_alloc+0x24/0x160 __mmap_region+0xf6b/0x2660 mmap_region+0x2eb/0x3a0 do_mmap+0xc79/0x1240 vm_mmap_pgoff+0x252/0x4c0 ksys_mmap_pgoff+0xf8/0x120 __x64_sys_mmap+0x12a/0x190 do_syscall_64+0xa9/0x580 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) BUG: memory leak unreferenced object 0xffff8881118aca80 (size 360): comm "syz.7.14", pid 366, jiffies 4294913255 hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff c0 28 4d ae ff ff ff ff .........(M..... backtrace (crc db0f53bc): kmem_cache_alloc_noprof+0x3ab/0x630 alloc_empty_file+0x5a/0x1e0 alloc_file_pseudo+0x135/0x220 __shmem_file_setup+0x274/0x420 shmem_zero_setup_desc+0x9c/0x170 mmap_zero_prepare+0x123/0x140 __mmap_region+0xdda/0x2660 mmap_region+0x2eb/0x3a0 do_mmap+0xc79/0x1240 vm_mmap_pgoff+0x252/0x4c0 ksys_mmap_pgoff+0xf8/0x120 __x64_sys_mmap+0x12a/0x190 do_syscall_64+0xa9/0x580 entry_SYSCALL_64_after_hwframe+0x76/0x7e Found by syzkaller. | ||||
| CVE-2026-31653 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: dealloc repeat_call_control if damon_call() fails damon_call() for repeat_call_control of DAMON_SYSFS could fail if somehow the kdamond is stopped before the damon_call(). It could happen, for example, when te damon context was made for monitroing of a virtual address processes, and the process is terminated immediately, before the damon_call() invocation. In the case, the dyanmically allocated repeat_call_control is not deallocated and leaked. Fix the leak by deallocating the repeat_call_control under the damon_call() failure. This issue is discovered by sashiko [1]. | ||||
| CVE-2026-31652 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/stat: deallocate damon_call() failure leaking damon_ctx damon_stat_start() always allocates the module's damon_ctx object (damon_stat_context). Meanwhile, if damon_call() in the function fails, the damon_ctx object is not deallocated. Hence, if the damon_call() is failed, and the user writes Y to “enabled” again, the previously allocated damon_ctx object is leaked. This cannot simply be fixed by deallocating the damon_ctx object when damon_call() fails. That's because damon_call() failure doesn't guarantee the kdamond main function, which accesses the damon_ctx object, is completely finished. In other words, if damon_stat_start() deallocates the damon_ctx object after damon_call() failure, the not-yet-terminated kdamond could access the freed memory (use-after-free). Fix the leak while avoiding the use-after-free by keeping returning damon_stat_start() without deallocating the damon_ctx object after damon_call() failure, but deallocating it when the function is invoked again and the kdamond is completely terminated. If the kdamond is not yet terminated, simply return -EAGAIN, as the kdamond will soon be terminated. The issue was discovered [1] by sashiko. | ||||
| CVE-2026-31651 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix NULL-deref on disconnect Make sure to deregister the controller before dropping the reference to the driver data on disconnect to avoid NULL-pointer dereferences or use-after-free. | ||||
| CVE-2026-31650 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix use-after-free on disconnect The vub300 driver maintains an explicit reference count for the controller and its driver data and the last reference can in theory be dropped after the driver has been unbound. This specifically means that the controller allocation must not be device managed as that can lead to use-after-free. Note that the lifetime is currently also incorrectly tied the parent USB device rather than interface, which can lead to memory leaks if the driver is unbound without its device being physically disconnected (e.g. on probe deferral). Fix both issues by reverting to non-managed allocation of the controller. | ||||
| CVE-2026-31649 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix integer underflow in chain mode The jumbo_frm() chain-mode implementation unconditionally computes len = nopaged_len - bmax; where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit() decides to invoke jumbo_frm() based on skb->len (total length including page fragments): is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc); When a packet has a small linear portion (nopaged_len <= bmax) but a large total length due to page fragments (skb->len > bmax), the subtraction wraps as an unsigned integer, producing a huge len value (~0xFFFFxxxx). This causes the while (len != 0) loop to execute hundreds of thousands of iterations, passing skb->data + bmax * i pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less SoCs (the typical deployment for stmmac), this maps arbitrary kernel memory to the DMA engine, constituting a kernel memory disclosure and potential memory corruption from hardware. Fix this by introducing a buf_len local variable clamped to min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then always safe: it is zero when the linear portion fits within a single descriptor, causing the while (len != 0) loop to be skipped naturally, and the fragment loop in stmmac_xmit() handles page fragments afterward. | ||||
| CVE-2026-31648 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm: filemap: fix nr_pages calculation overflow in filemap_map_pages() When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I encountered some very strange crash issues showing up as "Bad page state": " [ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb [ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb [ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff) [ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000 [ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000 [ 734.496442] page dumped because: nonzero mapcount " After analyzing this page’s state, it is hard to understand why the mapcount is not 0 while the refcount is 0, since this page is not where the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can reproduce the crash as well and captured the first warning where the issue appears: " [ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0 [ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 734.469315] memcg:ffff000807a8ec00 [ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540" [ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff) ...... [ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1), const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *: (struct folio *)_compound_head(page + nr_pages - 1))) != folio) [ 734.469390] ------------[ cut here ]------------ [ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468, CPU#90: stress-ng-mlock/9430 [ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P) [ 734.469555] set_pte_range+0xd8/0x2f8 [ 734.469566] filemap_map_folio_range+0x190/0x400 [ 734.469579] filemap_map_pages+0x348/0x638 [ 734.469583] do_fault_around+0x140/0x198 ...... [ 734.469640] el0t_64_sync+0x184/0x188 " The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page + nr_pages - 1) != folio, folio)", which indicates that set_pte_range() tried to map beyond the large folio’s size. By adding more debug information, I found that 'nr_pages' had overflowed in filemap_map_pages(), causing set_pte_range() to establish mappings for a range exceeding the folio size, potentially corrupting fields of pages that do not belong to this folio (e.g., page->_mapcount). After above analysis, I think the possible race is as follows: CPU 0 CPU 1 filemap_map_pages() ext4_setattr() //get and lock folio with old inode->i_size next_uptodate_folio() ....... //shrink the inode->i_size i_size_write(inode, attr->ia_size); //calculate the end_pgoff with the new inode->i_size file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1; end_pgoff = min(end_pgoff, file_end); ...... //nr_pages can be overflowed, cause xas.xa_index > end_pgoff end = folio_next_index(folio) - 1; nr_pages = min(end, end_pgoff) - xas.xa_index + 1; ...... //map large folio filemap_map_folio_range() ...... //truncate folios truncate_pagecache(inode, inode->i_size); To fix this issue, move the 'end_pgoff' calculation before next_uptodate_folio(), so the retrieved folio stays consistent with the file end to avoid ---truncated--- | ||||
| CVE-2026-31647 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix PREEMPT_RT raw/bh spinlock nesting for async VC handling Switch from using the completion's raw spinlock to a local lock in the idpf_vc_xn struct. The conversion is safe because complete/_all() are called outside the lock and there is no reason to share the completion lock in the current logic. This avoids invalid wait context reported by the kernel due to the async handler taking BH spinlock: [ 805.726977] ============================= [ 805.726991] [ BUG: Invalid wait context ] [ 805.727006] 7.0.0-rc2-net-devq-031026+ #28 Tainted: G S OE [ 805.727026] ----------------------------- [ 805.727038] kworker/u261:0/572 is trying to lock: [ 805.727051] ff190da6a8dbb6a0 (&vport_config->mac_filter_list_lock){+...}-{3:3}, at: idpf_mac_filter_async_handler+0xe9/0x260 [idpf] [ 805.727099] other info that might help us debug this: [ 805.727111] context-{5:5} [ 805.727119] 3 locks held by kworker/u261:0/572: [ 805.727132] #0: ff190da6db3e6148 ((wq_completion)idpf-0000:83:00.0-mbx){+.+.}-{0:0}, at: process_one_work+0x4b5/0x730 [ 805.727163] #1: ff3c6f0a6131fe50 ((work_completion)(&(&adapter->mbx_task)->work)){+.+.}-{0:0}, at: process_one_work+0x1e5/0x730 [ 805.727191] #2: ff190da765190020 (&x->wait#34){+.+.}-{2:2}, at: idpf_recv_mb_msg+0xc8/0x710 [idpf] [ 805.727218] stack backtrace: ... [ 805.727238] Workqueue: idpf-0000:83:00.0-mbx idpf_mbx_task [idpf] [ 805.727247] Call Trace: [ 805.727249] <TASK> [ 805.727251] dump_stack_lvl+0x77/0xb0 [ 805.727259] __lock_acquire+0xb3b/0x2290 [ 805.727268] ? __irq_work_queue_local+0x59/0x130 [ 805.727275] lock_acquire+0xc6/0x2f0 [ 805.727277] ? idpf_mac_filter_async_handler+0xe9/0x260 [idpf] [ 805.727284] ? _printk+0x5b/0x80 [ 805.727290] _raw_spin_lock_bh+0x38/0x50 [ 805.727298] ? idpf_mac_filter_async_handler+0xe9/0x260 [idpf] [ 805.727303] idpf_mac_filter_async_handler+0xe9/0x260 [idpf] [ 805.727310] idpf_recv_mb_msg+0x1c8/0x710 [idpf] [ 805.727317] process_one_work+0x226/0x730 [ 805.727322] worker_thread+0x19e/0x340 [ 805.727325] ? __pfx_worker_thread+0x10/0x10 [ 805.727328] kthread+0xf4/0x130 [ 805.727333] ? __pfx_kthread+0x10/0x10 [ 805.727336] ret_from_fork+0x32c/0x410 [ 805.727345] ? __pfx_kthread+0x10/0x10 [ 805.727347] ret_from_fork_asm+0x1a/0x30 [ 805.727354] </TASK> | ||||
| CVE-2026-31646 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool() page_pool_create() can return an ERR_PTR on failure. The return value is used unconditionally in the loop that follows, passing the error pointer through xdp_rxq_info_reg_mem_model() into page_pool_use_xdp_mem(), which dereferences it, causing a kernel oops. Add an IS_ERR check after page_pool_create() to return early on failure. | ||||
| CVE-2026-31645 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: lan966x: fix page pool leak in error paths lan966x_fdma_rx_alloc() creates a page pool but does not destroy it if the subsequent fdma_alloc_coherent() call fails, leaking the pool. Similarly, lan966x_fdma_init() frees the coherent DMA memory when lan966x_fdma_tx_alloc() fails but does not destroy the page pool that was successfully created by lan966x_fdma_rx_alloc(), leaking it. Add the missing page_pool_destroy() calls in both error paths. | ||||
| CVE-2026-31644 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: lan966x: fix use-after-free and leak in lan966x_fdma_reload() When lan966x_fdma_reload() fails to allocate new RX buffers, the restore path restarts DMA using old descriptors whose pages were already freed via lan966x_fdma_rx_free_pages(). Since page_pool_put_full_page() can release pages back to the buddy allocator, the hardware may DMA into memory now owned by other kernel subsystems. Additionally, on the restore path, the newly created page pool (if allocation partially succeeded) is overwritten without being destroyed, leaking it. Fix both issues by deferring the release of old pages until after the new allocation succeeds. Save the old page array before the allocation so old pages can be freed on the success path. On the failure path, the old descriptors, pages and page pool are all still valid, making the restore safe. Also ensure the restore path re-enables NAPI and wakes the netdev, matching the success path. | ||||
| CVE-2026-31643 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix key parsing memleak In rxrpc_preparse_xdr_yfs_rxgk(), the memory attached to token->rxgk can be leaked in a few error paths after it's allocated. Fix this by freeing it in the "reject_token:" case. | ||||
| CVE-2026-31642 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix call removal to use RCU safe deletion Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu() rather than list_del_init() to prevent stuffing up reading /proc/net/rxrpc/calls from potentially getting into an infinite loop. This, however, means that list_empty() no longer works on an entry that's been deleted from the list, making it harder to detect prior deletion. Fix this by: Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that are unexpectedly still on the list. Limiting the number of steps means there's no need to call cond_resched() or to remove calls from the list here, thereby eliminating the need for rxrpc_put_call() to check for that. rxrpc_put_call() can then be fixed to unconditionally delete the call from the list as it is the only place that the deletion occurs. | ||||
| CVE-2026-31641 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix RxGK token loading to check bounds rxrpc_preparse_xdr_yfs_rxgk() reads the raw key length and ticket length from the XDR token as u32 values and passes each through round_up(x, 4) before using the rounded value for validation and allocation. When the raw length is >= 0xfffffffd, round_up() wraps to 0, so the bounds check and kzalloc both use 0 while the subsequent memcpy still copies the original ~4 GiB value, producing a heap buffer overflow reachable from an unprivileged add_key() call. Fix this by: (1) Rejecting raw key lengths above AFSTOKEN_GK_KEY_MAX and raw ticket lengths above AFSTOKEN_GK_TOKEN_MAX before rounding, consistent with the caps that the RxKAD path already enforces via AFSTOKEN_RK_TIX_MAX. (2) Sizing the flexible-array allocation from the validated raw key length via struct_size_t() instead of the rounded value. (3) Caching the raw lengths so that the later field assignments and memcpy calls do not re-read from the token, eliminating a class of TOCTOU re-parse. The control path (valid token with lengths within bounds) is unaffected. | ||||
| CVE-2026-31640 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix use of wrong skb when comparing queued RESP challenge serial In rxrpc_post_response(), the code should be comparing the challenge serial number from the cached response before deciding to switch to a newer response, but looks at the newer packet private data instead, rendering the comparison always false. Fix this by switching to look at the older packet. Fix further[1] to substitute the new packet in place of the old one if newer and also to release whichever we don't use. | ||||
| CVE-2026-31639 | 1 Linux | 1 Linux Kernel | 2026-04-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix key reference count leak from call->key When creating a client call in rxrpc_alloc_client_call(), the code obtains a reference to the key. This is never cleaned up and gets leaked when the call is destroyed. Fix this by freeing call->key in rxrpc_destroy_call(). Before the patch, it shows the key reference counter elevated: $ cat /proc/keys | grep afs@54321 1bffe9cd I--Q--i 8053480 4169w 3b010000 1000 1000 rxrpc afs@54321: ka $ After the patch, the invalidated key is removed when the code exits: $ cat /proc/keys | grep afs@54321 $ | ||||