Export limit exceeded: 353521 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (353521 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46005 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix a resource leak in xfs_alloc_buftarg() In the error path, call fs_put_dax() to drop the DAX device reference. | ||||
| CVE-2026-46007 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (powerz) Avoid cacheline sharing for DMA buffer Depending on the architecture the transfer buffer may share a cacheline with the following mutex. As the buffer may be used for DMA, that is problematic. Use the high-level DMA helpers to make sure that cacheline sharing can not happen. Also drop the comment, as the helpers are documentation enough. https://sashiko.dev/#/message/20260408175814.934BFC19421%40smtp.kernel.org | ||||
| CVE-2026-46009 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-ntb: Remove duplicate resource teardown epf_ntb_epc_destroy() duplicates the teardown that the caller is supposed to do later. This leads to an oops when .allow_link fails or when .drop_link is performed. Remove the helper. Also drop pci_epc_put(). EPC device refcounting is tied to configfs EPC group lifetime, and pci_epc_put() in the .drop_link path is sufficient. | ||||
| CVE-2026-46538 | 2026-05-27 | 5.9 Medium | ||
| Microsoft UFO open-source framework for intelligent automation across devices and platforms. In 3.0.1-4-ge2626659, Microsoft UFO's constellation client tracks pending task responses by session_id only and does not verify that a TASK_END message came from the device that originally received the task. When the constellation sends a task to a target device, it records a pending Future under a session key. The pending task record stores the expected device ID, but the completion path ignores that binding. If another authenticated peer device sends a forged TASK_END with the same session_id, the constellation accepts the response and completes the victim device's pending Future with attacker-controlled result data. This is an authenticated cross-device task-result injection issue. | ||||
| CVE-2026-46416 | 2026-05-27 | 6.3 Medium | ||
| Microsoft UFO open-source framework for intelligent automation across devices and platforms. In 3.0.1-4-ge2626659, Microsoft UFO creates one shared UFOWebSocketHandler instance and reuses it for multiple authenticated WebSocket connections. The handler stores per-connection protocol objects in mutable instance fields. Each new WebSocket connection overwrites those fields. Later, message handlers send responses through the shared fields instead of through protocol objects bound to the originating connection. As a result, the most recently connected authenticated client can receive protocol responses that belong to another authenticated client. | ||||
| CVE-2026-46414 | 2026-05-27 | 8.8 High | ||
| Microsoft UFO open-source framework for intelligent automation across devices and platforms. In 3.0.1-4-ge2626659, Microsoft UFO's WebSocket control plane trusts client-supplied identity and role fields in task messages. A client connection can register as a normal device, but later send a TASK message claiming client_type="constellation" and target_id=<victim-device-id>. The server trusts the role and target values from the wire message rather than enforcing the role registered for that WebSocket connection. As a result, any authenticated WebSocket client with the shared server token can spoof the higher-privilege constellation role and dispatch attacker-controlled tasks to another connected device. The same client registry also allows duplicate client_id registration, overwriting an existing live client's stored websocket, role, and task protocol. This is an authenticated WebSocket role/identity spoofing issue leading to peer task hijacking. | ||||
| CVE-2026-46402 | 2026-05-27 | 8.1 High | ||
| Microsoft UFO open-source framework for intelligent automation across devices and platforms. In 3.0.1-4-ge2626659, Microsoft UFO uses the user-controlled task_name value directly when constructing session log paths. An authenticated client can supply path traversal sequences in task_name and cause UFO to create log directories and log files outside the intended logs/ directory. | ||||
| CVE-2026-46544 | 2026-05-27 | 5.3 Medium | ||
| Microsoft UFO open-source framework for intelligent automation across devices and platforms. In 3.0.1-4-ge2626659, Microsoft UFO accepts client-supplied session_id values in WebSocket task messages and reuses an existing in-memory session object if that session_id already exists. If a prior session has completed and remains in memory with populated results, a different authenticated client can send a new TASK message using the same session_id. The server re-enters the existing session object and sends the stale stored result to the new requester through the normal send_task_end() callback path. This is an authenticated cross-client stale result replay issue. The issue requires that the attacker knows or can predict a live or recently completed session_id. | ||||
| CVE-2026-45962 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: Validate SQE128 flag before accessing the cmd ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before IO_URING_F_SQE128 flag check. This could cause out of boundary memory access. Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return -EINVAL immediately if the flag is not set. | ||||
| CVE-2026-46020 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp Patch series "mm/damon/core: validate damos_quota_goal->nid". node_mem[cg]_{used,free}_bp DAMOS quota goals receive the node id. The node id is used for si_meminfo_node() and NODE_DATA() without proper validation. As a result, privileged users can trigger an out of bounds memory access using DAMON_SYSFS. Fix the issues. The issue was originally reported [1] with a fix by another author. The original author announced [2] that they will stop working including the fix that was still in the review stage. Hence I'm restarting this. This patch (of 2): Users can set damos_quota_goal->nid with arbitrary value for node_mem_{used,free}_bp. But DAMON core is using those for si_meminfo_node() without the validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo ./damo start --damos_action stat \ --damos_quota_goal node_mem_used_bp 50% -1 \ --damos_quota_interval 1s $ sudo dmesg [...] [ 65.565986] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 Fix this issue by adding the validation of the given node. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio. | ||||
| CVE-2026-45960 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: return error when node already exists in hfs_bnode_create When hfs_bnode_create() finds that a node is already hashed (which should not happen in normal operation), it currently returns the existing node without incrementing its reference count. This causes a reference count inconsistency that leads to a kernel panic when the node is later freed in hfs_bnode_put(): kernel BUG at fs/hfsplus/bnode.c:676! BUG_ON(!atomic_read(&node->refcnt)) This scenario can occur when hfs_bmap_alloc() attempts to allocate a node that is already in use (e.g., when node 0's bitmap bit is incorrectly unset), or due to filesystem corruption. Returning an existing node from a create path is not normal operation. Fix this by returning ERR_PTR(-EEXIST) instead of the node when it's already hashed. This properly signals the error condition to callers, which already check for IS_ERR() return values. | ||||
| CVE-2026-45996 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: imx: fix use-after-free on unbind The SPI subsystem frees the controller and any subsystem allocated driver data as part of deregistration (unless the allocation is device managed). Take another reference before deregistering the controller so that the driver data is not freed until the driver is done with it. | ||||
| CVE-2026-45997 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails If device_add(&sdkp->disk_dev) fails, put_device() runs scsi_disk_release(), which frees the scsi_disk but leaves the gendisk referenced. The device_add_disk() error path in sd_probe() calls put_disk(gd); call put_disk(gd) here to mirror that cleanup. | ||||
| CVE-2026-45998 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix potential UAF after skb_unshare() failure If skb_unshare() fails to unshare a packet due to allocation failure in rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread()) will be NULL'd out. This will likely cause the call to trace_rxrpc_rx_done() to oops. Fix this by moving the unsharing down to where rxrpc_input_call_event() calls rxrpc_input_call_packet(). There are a number of places prior to that where we ignore DATA packets for a variety of reasons (such as the call already being complete) for which an unshare is then avoided. And with that, rxrpc_input_packet() doesn't need to take a pointer to the pointer to the packet, so change that to just a pointer. | ||||
| CVE-2026-46001 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data() Fix two bugs in pt5161l_read_block_data(): 1. Buffer overrun: The local buffer rbuf is declared as u8 rbuf[24], but i2c_smbus_read_block_data() can return up to I2C_SMBUS_BLOCK_MAX (32) bytes. The i2c-core copies the data into the caller's buffer before the return value can be checked, so the post-read length validation does not prevent a stack overrun if a device returns more than 24 bytes. Resize the buffer to I2C_SMBUS_BLOCK_MAX. 2. Unexpected positive return on length mismatch: When all three retries are exhausted because the device returns data with an unexpected length, i2c_smbus_read_block_data() returns a positive byte count. The function returns this directly, and callers treat any non-negative return as success, processing stale or incomplete buffer contents. Return -EIO when retries are exhausted with a positive return value, preserving the negative error code on I2C failure. | ||||
| CVE-2026-45322 | 2026-05-27 | 7.8 High | ||
| Microsoft UFO open-source framework for intelligent automation across devices and platforms. Microsoft UFO tagged releases up to and including v3.0.0 contain an OS command injection vulnerability in the shell action replay path. In affected releases, ShellReceiver.run_shell() passes a command string from action parameters directly to subprocess.Popen() with shell=True and executable=powershell.exe. The same shell-execution behavior is also reachable through ShellReceiver.execute_command(). The shell receiver is invoked by action classes such as RunShellCommand.execute() and ExecuteCommand.execute(), which forward stored action parameters to the shell receiver. Because UFO stores planned and executed actions in per-session JSON records, an attacker who can write or modify a session/action JSON file can plant a shell action. When the session is resumed or replayed, UFO executes the attacker's command as the UFO process user. | ||||
| CVE-2026-46089 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: zram: do not forget to endio for partial discard requests As reported by Qu Wenruo and Avinesh Kumar, the following getconf PAGESIZE 65536 blkdiscard -p 4k /dev/zram0 takes literally forever to complete. zram doesn't support partial discards and just returns immediately w/o doing any discard work in such cases. The problem is that we forget to endio on our way out, so blkdiscard sleeps forever in submit_bio_wait(). Fix this by jumping to end_bio label, which does bio_endio(). | ||||
| CVE-2026-46094 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access The bounds check for the next xattr entry in check_xattrs() uses (void *)next >= end, which allows next to point within sizeof(u32) bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4 bytes via *(__u32 *)(entry), which can overrun the valid xattr region. For example, if next lands at end - 1, the check passes since next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1, accessing 3 bytes beyond the valid region. Fix this by changing the check to (void *)next + sizeof(u32) > end, ensuring there is always enough space for the IS_LAST_ENTRY() read on the subsequent iteration. | ||||
| CVE-2026-46100 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs: afs: revert mmap_prepare() change Partially reverts commit 9d5403b1036c ("fs: convert most other generic_file_*mmap() users to .mmap_prepare()"). This is because the .mmap invocation establishes a refcount, but .mmap_prepare is called at a point where a merge or an allocation failure might happen after the call, which would leak the refcount increment. Functionality is being added to permit the use of .mmap_prepare in this case, but in the interim, we need to fix this. | ||||
| CVE-2026-48917 | 2026-05-27 | 6.6 Medium | ||
| Jenkins LDAP Plugin 807.v7d7de30930cf and earlier deserializes data from LDAP referrals without validation. | ||||